Name: RCAN-01 ABB CANOpen Adapter Module | Drive Option Slot IP20
SKU: RCAN-01
Price: 277.00 USD
Availability: InStock

Product details

ABB RCAN-01 CANOpen Adapter Module – Smart Network Link for Your Drive

The RCAN-01 connects your ABB drive to a CANopen network. It fits neatly into an option slot inside the drive. Moreover, it supports fast data rates up to 1 Mbit/s. As a result, you get smooth control and quick feedback in multi-drop systems. In addition, all materials are UL/CSA approved. Therefore, this module suits tough factory floors and demanding machine builds.

Brand: ABB
Model: RCAN-01
Series: ABB Drive Option Adapter Series
Type: CANopen Adapter Module

Key Facts at a Glance

Mounting: Fits into an option slot inside the drive
Degree of protection: IP20
Ambient conditions: Follow the drive hardware manual
Current consumption: 250 mA max. (5 V), from the drive control board
Estimated min. lifetime: 100 000 h
Approvals: All materials are UL/CSA approved
EMC: Complies with EN 50081-2 and EN 50082-2

Settings – Simple and Flexible

Through drive parameters
Rotary switches for node address selection (address range 00…99)
Rotary switch for baud rate selection

Connectors – Ready to Wire

34-pin parallel bus connector
9-pin male DSUB connector (X1)

CANopen Network – Detailed Tree View

CANopen network
- Serial Communication Type: Asynchronous, half duplex
- Transfer Rate: 1 Mbit/s, 500 kbit/s, 250 kbit/s, 125 kbit/s, 100 kbit/s, 50 kbit/s, 20 kbit/s or 10 kbit/s
- Protocol: CANopen
- Topology: Multi-drop
- Size of network: Max. 128 nodes, depends on the used CAN controller
- Termination: 121 ohm, 1%, Metal Film, 1/4 W
- Medium: Screened, twisted pair RS-485 cable

Installation Guide

First, power down the drive and follow all safety steps.
Then slide the RCAN-01 into a free option slot.
After that, set the node address with the rotary switches.
Next, pick the baud rate with the second rotary switch.
In addition, wire the DSUB and bus connectors as shown.
Moreover, use screened twisted pair cable for best signal quality.
Finally, add 121 ohm termination at both bus ends.

Expert Review

The RCAN-01 is a solid choice for CANopen integration. It offers fast rates up to 1 Mbit/s and a wide node range. In addition, the rotary switches make setup quick. Furthermore, the module draws little power and lasts long. As a result, it keeps your drive network stable and simple to service.

Manager’s Insight

This module cuts commissioning time and lowers spare-part stress. Moreover, one part fits many ABB drives. Therefore, stock one or two units to avoid line stops. Additionally, the 12-month warranty and fast dispatch keep projects on track. In short, it is a low-risk upgrade for CANopen networks.

Best-Fit Equipment and Application Scenarios

FAQ – Practical Answers and Buying Guidance

Q: How do I set the node address?

A: Use the rotary switches. The range is 00 to 99. Then save the setting in the drive parameters.

Q: Which cable works best?

A: Use screened twisted pair RS-485 cable. Also add 121 ohm termination at both ends.

Q: Can I mix baud rates on one bus?

A: No. Every node must use the same rate. Pick one rate from 10 kbit/s to 1 Mbit/s.

Q: What is the warranty and delivery time?

A: Each unit carries a 12-month warranty. We ship in 12–24 hours via FedEx, UPS or DHL.

Q: How do I pick the right adapter for my drive?

A: Check that your drive has a free option slot and CANopen support. Confirm the node count and cable type. Then match the baud rate to your network. For new builds, order a spare to cut downtime.