Product details
Product Overview
MDX91A-4700-503-4-T00 is a high-power multi-axis inverter from SEW-EURODRIVE. It belongs to the MOVIDRIVE modular series. This book-style cabinet unit delivers 470 A rated output at 4 kHz PWM. It connects directly to a 3-phase AC line. The drive supports four-quadrant operation. It fits demanding multi-axis applications in industrial automation.
Key Technical Data
- Brand: SEW-EURODRIVE
- Model: MDX91A-4700-503-4-T00
- Series: MOVIDRIVE modular Multi-Axis Inverter (MDX91A)
- Frame size: 9
- Rated output current: 470.0 A at 4 kHz PWM
- Nominal line current: 423.0 A
- Supply voltage: 3 x AC 380–500 V, 50–60 Hz
- Line frequency tolerance: 50–60 Hz ±5%
- Recommended motor power (ASM): 250 kW
- Nominal DC link voltage: DC 560 V
- Overload capacity: 150% of I_N at 2.5 kHz PWM
- Continuous output current at 0 Hz: 434 A (I_N x 0.9)
- PWM frequency: 2.5 kHz, 4 kHz
- Max output frequency: U/f 599 Hz; VFCplus 250 Hz; CFC 500 Hz; ELSM 500 Hz
- Control modes: U/f, VFCplus, CFC, ELSM
- Brake chopper: integrated; optional braking resistor BR..
- Minimum braking resistance: 2.3 Ω
- Brake chopper continuous power: per S_N rating; peak 200% x S_N
- Auxiliary power supply: integrated DC 24 V, 80 W, expandable
- Line/motor terminals: M10 copper busbars
- EMC variant: basic interference suppression integrated
- Protection rating: IP10; optional IP20 with plastic terminal covers
- Pollution class: 2 (IEC 60664-1); overvoltage category III
Communication and Compatibility
- Built-in system bus: EtherCAT / CiA402
- Fieldbus options via cards: /CFN21A PROFINET IO, /DFE32B EtherNet/IP, /DFI11B PROFIBUS DPV1
- Expansion cards: /CES11A multi-encoder, /CID21A encoder interface, /CIO21A I/O expansion, /CS..A MOVISAFE safety card, /L conformal-coated PCB
- Platform: MOVI-C platform (MOVIDRIVE system / MOVIDRIVE technology)
- Motor compatibility: asynchronous motors (ASM) and synchronous motors via ELSM
Environmental Tolerance
- Operating temperature: 0 to +40 °C without derating; +40 to +60 °C with derating
- Storage temperature: -25 to +70 °C (EN 60721-3-1 class 1K2, non-condensing)
- Transport temperature: -25 to +70 °C (EN 60721-3-2 class 2K3, non-condensing)
- Relative humidity: non-condensing (EN 60721-3-3 class 3K3)
- Installation altitude: up to 1000 m without restriction; 1000–3800 m with 1% I_N derating per 100 m
- Anti-interference: basic EMC suppression built in; conformal coating option /L for harsh environments
Installation Guide
- Mount the book-style unit vertically in a control cabinet. Keep frame size 9 clearances as shown in the product manual section 2.7.
- Connect line and motor cables to M10 copper busbars. Tighten to SEW-EURODRIVE torque specs.
- Use the integrated DC 24 V auxiliary supply. Add an external supply if the 80 W budget is not enough.
- Choose the EMC variant that matches your site. Basic interference suppression is already integrated.
- For IP20 touch protection, fit the optional plastic terminal covers.
- Observe pollution class 2 and overvoltage category III conditions. Derate I_N by 1% per 100 m above 1000 m altitude.
Setup and Maintenance Convenience
- The drive supports U/f, VFCplus, CFC, and ELSM control. Select the mode that fits your motor and load.
- EtherCAT/CiA402 comes built in. Fieldbus cards add PROFINET, EtherNet/IP, or PROFIBUS DPV1 when needed.
- Option cards expand encoders, I/O, and safety functions. This keeps later upgrades simple.
- Use the integrated brake chopper with an optional BR.. resistor. Minimum resistance is 2.3 Ω.
- The conformal-coated /L PCB option reduces maintenance in dusty or humid sites.
- Firmware and manual are active in the SEW-EURODRIVE product line. Last verified: 2026-09.
Certifications and Standards
- Pollution class 2 per IEC 60664-1
- Overvoltage category III
- Storage per EN 60721-3-1 class 1K2
- Transport per EN 60721-3-2 class 2K3
- Humidity per EN 60721-3-3 class 3K3
- CiA402 drive profile via EtherCAT system bus
Package Contents
- 1 x MDX91A-4700-503-4-T00 inverter unit, frame size 9
- Integrated DC 24 V auxiliary power supply (80 W)
- Integrated brake chopper
- Basic EMC interference suppression
- Product manual reference (Maßbild drawings in section 2.7 for dimensions and weight)
- Optional items sold separately: BR.. braking resistor, /CFN21A, /DFE32B, /DFI11B, /CES11A, /CID21A, /CIO21A, /CS..A safety card, /L conformal coating, IP20 plastic terminal covers
FAQ
Q: What makes this model suitable for multi-axis systems?
A: It is a book-style cabinet inverter with 470 A output. It supports EtherCAT/CiA402 as standard. It also shares the MOVI-C platform with other axes.
Q: Can I use this drive with a synchronous motor?
A: Yes. It offers ELSM control for extended synchronous motor operation. CFC and VFCplus also cover field-oriented and vector control needs.
Q: How do I handle braking energy?
A: The unit has an integrated brake chopper. Add an optional BR.. resistor. The minimum braking resistance is 2.3 Ω. Peak chopper power reaches 200% x S_N.
Q: What should I check before mounting?
A: Check cabinet space, altitude, and ambient temperature. Derate I_N above 1000 m by 1% per 100 m. Derate power above +40 °C.
Q: Is fieldbus control available out of the box?
A: EtherCAT/CiA402 is built in. For PROFINET IO, EtherNet/IP, or PROFIBUS DPV1, add the matching option card.
Q: From experience, what is a common setup tip?
A: Plan the 24 V auxiliary load first. The built-in 80 W supply is often enough. If you add many I/O cards, use an external supply early.
Q: What about harsh or humid plant rooms?
A: Choose the /L conformal-coated PCB option. Keep humidity non-condensing. Respect storage and transport temperature limits.
Q: Are dimensions and weight easy to find?
A: SEW-EURODRIVE publishes them as Maßbild dimension drawings per frame size. See section 2.7 of the product manual. The datasheet does not list a numerical table.
















There are no reviews yet.