Product details
Product Overview
- The MDX91A-3000-503-4-T00 is a multi-axis inverter from SEW-EURODRIVE.
- It belongs to the MOVIDRIVE modular Multi-Axis Inverter (MDX91A) series.
- This book-style cabinet unit delivers 300.0 A rated output at 4 kHz PWM.
- It connects directly to a 3~AC line and supports 4-quadrant operation.
- Frame size 8 fits space-saving multi-axis setups in control cabinets.
- Integrated DC 24 V auxiliary power supply (80 W) can be supplemented externally.
- Built-in brake chopper pairs with optional braking resistor BR.. for dynamic stops.
- Line and motor connections use robust M10 copper busbars.
- Communication uses EtherCAT / CiA402 on the system bus for fieldbus control.
- Option cards add PROFINET, EtherNet/IP, PROFIBUS, encoder, I/O and safety functions.
- This is an active product in the SEW-EURODRIVE MOVIDRIVE line.
Technical Specifications
- Brand: SEW-EURODRIVE
- Model: MDX91A-3000-503-4-T00
- Series: MOVIDRIVE modular Multi-Axis Inverter (MDX91A)
- Supply voltage: 3 x AC 380–500 V nominal, 50–60 Hz
- Line frequency tolerance: 50–60 Hz ±5%
- Nominal line current: 270.0 A
- Rated output current (4 kHz PWM): 300.0 A
- Continuous output current at 0 Hz: 277 A (I_N x 0.9)
- Recommended motor power (ASM): 160 kW
- Overload capacity: 150% of I_N at 2.5 kHz PWM
- Continuous rating at 2.5 kHz: 100% x I_N
- PWM frequency: 2.5, 4, 8 kHz
- Max output frequency: U/f 599 Hz; VFCplus 250 Hz; CFC 500 Hz; ELSM 500 Hz
- Nominal DC link voltage: DC 560 V
- Minimum braking resistance R_BRmin: 2.3 Ω
- Brake chopper continuous power: per S_N rating
- Brake chopper peak power: 200% x S_N
- Apparent output power S_N: Not published by manufacturer for this size
- Power section nominal power loss: Not published by manufacturer for this size
- Control modes: U/f, VFCplus, CFC, ELSM
- EMC variant: basic interference suppression integrated
Environmental Range and Immunity
- Operating temperature: 0 to +40 °C without derating
- Operating temperature with derating: +40 to +60 °C
- Storage temperature: −25 to +70 °C (EN 60721-3-1 class 1K2, non-condensing)
- Transport temperature: −25 to +70 °C (EN 60721-3-2 class 2K3, non-condensing)
- Relative humidity: non-condensing, no moisture condensation (EN 60721-3-3 class 3K3)
- Protection rating: IP10; optional IP20 with plastic terminal covers
- Pollution class: 2 (IEC 60664-1); overvoltage category III
- Installation altitude: up to 1000 m without restriction
- Altitude derating: 1000–3800 m with 1% I_N derating per 100 m
- Basic interference suppression supports stable operation in industrial cabinets.
Installation Guide
- Mount the book-style unit vertically inside a control cabinet.
- Keep the frame size 8 clearances as shown in the product manual.
- Connect line and motor cables to the M10 copper busbars.
- Use the integrated DC 24 V auxiliary supply (80 W) for control power.
- Add an external 24 V supply if the load exceeds 80 W.
- Install the optional braking resistor BR.. if high braking energy occurs.
- Fit plastic terminal covers to reach IP20 protection.
- Follow local EMC rules for cabinet grounding and cable routing.
- Confirm altitude derating when installing above 1000 m.
Commissioning and Maintenance Convenience
- Start with the built-in EtherCAT / CiA402 system bus interface.
- Select control mode: U/f, VFCplus, CFC or ELSM.
- Set PWM frequency to 2.5, 4 or 8 kHz to match the motor.
- Use option cards to add encoder feedback or extra I/O.
- Check DC link voltage (nominal DC 560 V) during first power-up.
- Keep cabinet airflow clear to respect the 0 to +40 °C rating.
- Inspect busbar torque and terminal covers during routine checks.
- Store spare units between −25 and +70 °C, non-condensing.
Compatibility Notes
- Works with the MOVIDRIVE system and MOVIDRIVE technology platform.
- System bus protocol: EtherCAT / CiA402.
- Fieldbus options: /CFN21A PROFINET IO, /DFE32B EtherNet/IP, /DFI11B PROFIBUS DPV1.
- Expansion cards: /CES11A multi-encoder, /CID21A encoder interface, /CIO21A I/O expansion.
- Safety option /CS..A MOVISAFE card adds safety functions.
- Conformal-coated PCB option: /L.
- Recommended motor power for ASM: 160 kW.
- Optional braking resistor BR.. works with the integrated brake chopper.
Certification Information
- Designed to IEC 60664-1 pollution class 2 and overvoltage category III.
- Storage and transport meet EN 60721-3-1 class 1K2 and EN 60721-3-2 class 2K3.
- Humidity conditions meet EN 60721-3-3 class 3K3.
- Basic interference suppression is integrated.
- Final certification details are listed in the official product manual.
Package List
- 1 x MDX91A-3000-503-4-T00 multi-axis inverter
- 1 x product manual reference (digital or printed per order)
- Optional items ordered separately: braking resistor, fieldbus card, encoder card, I/O card, safety card, IP20 covers
- Check the delivery note for exact option card content.
FAQ
- What is the rated output current of this model?
It delivers 300.0 A at 4 kHz PWM. - Which control modes does it support?
U/f, VFCplus, CFC and ELSM are available. - Can I use it above 40 °C?
Yes, from +40 to +60 °C with derating. - How does altitude affect operation?
Up to 1000 m runs unrestricted; above 1000 m derate 1% per 100 m. - What communication comes built in?
EtherCAT / CiA402 on the system bus. - From experience, what should I check first at startup?
Field engineers often verify DC link voltage and busbar torque first. - In practice, how do I avoid nuisance trips?
Match PWM frequency and overload settings to the actual duty cycle. - What is the minimum braking resistance?
2.3 Ω. - Is IP20 available?
Yes, with optional plastic terminal covers.
















There are no reviews yet.