Over 50,000 hot-selling automation module components.

MDX91A-2500-503-4-T00 SEW MOVIDRIVE Multi-Axis Inverter 250 A

0 Reviews
In stock
  • 100% genuine products in stock with fast delivery.
  • 30-day return policy for quality assurance.
  • 12-month warranty for peace of mind.
SKU: MDX91A-2500-503-4-T00
Brands:

Product details

Product Overview

MDX91A-2500-503-4-T00 is a book-style multi-axis inverter from SEW-EURODRIVE. It belongs to the MOVIDRIVE modular series. This model delivers 250.0 A rated output at 4 kHz PWM. It connects directly to a 3-phase AC line. Frame size 8 supports 4-quadrant operation. A built-in DC 24 V auxiliary supply (80 W) powers control circuits. You can add an external supply if needed. The integrated brake chopper works with optional BR.. resistors. M10 copper busbars handle line and motor wiring. The unit suits demanding multi-axis cabinets in factory automation.

Technical Data

  • Brand: SEW-EURODRIVE
  • Model: MDX91A-2500-503-4-T00
  • Series: MOVIDRIVE modular Multi-Axis Inverter (MDX91A)
  • Module type: Book-style control-cabinet application inverter, frame size 8
  • Electrical
    • Supply voltage: 3 x AC 380-500 V nominal, 50-60 Hz
    • Line frequency tolerance: 50-60 Hz ±5%
    • Nominal line current: 225.0 A
    • Rated output current at 4 kHz PWM: 250.0 A
    • Recommended motor power (ASM): 132 kW
    • Overload: 150% of I_N at 2.5 kHz PWM
    • Continuous current at 0 Hz: 230 A (0.9 x I_N)
    • PWM frequency: 2.5, 4, 8 kHz
    • Max output frequency: U/f 599 Hz, VFCplus 250 Hz, CFC 500 Hz, ELSM 500 Hz
    • Nominal DC link voltage: DC 560 V
    • Minimum braking resistance R_BRmin: 2.3 Ω
    • Brake chopper peak power: 200% x S_N
    • Power loss and S_N: not published for this size
    • EMC: basic interference suppression integrated
  • Control and communication
    • Control modes: U/f, VFCplus, CFC, ELSM
    • System bus: EtherCAT / CiA402 (MOVIDRIVE technology variant)
    • Fieldbus cards: /CFN21A PROFINET IO, /DFE32B EtherNet/IP, /DFI11B PROFIBUS DPV1
    • Expansion cards: /CES11A multi-encoder, /CID21A encoder interface, /CIO21A I/O, /CS..A MOVISAFE safety, /L conformal coating
  • Temperature range
    • Operating: 0 to +40 °C without derating
    • Operating: +40 to +60 °C with derating
    • Storage: -25 to +70 °C (EN 60721-3-1 class 1K2)
    • Transport: -25 to +70 °C (EN 60721-3-2 class 2K3)
  • Environmental tolerance
    • Relative humidity: non-condensing (EN 60721-3-3 class 3K3)
    • Protection rating: IP10; IP20 with plastic terminal covers
    • Pollution class: 2 (IEC 60664-1); overvoltage category III
    • Installation altitude: up to 1000 m without restriction
    • Altitude 1000-3800 m: I_N derating 1% per 100 m
  • Immunity and noise
    • Integrated basic EMC filtering reduces line-borne noise
    • 4-quadrant operation supports regenerative braking
    • Shielded motor cables limit radiated interference
    • MOVISAFE safety card adds certified safe motion functions
  • Physical
    • Dimensions: published as dimension drawings per size (manual section 2.7)
    • Weight: published in dimension drawings per size
    • Terminals: M10 copper busbars

Installation Guide

  • Mount the book-style unit vertically in a control cabinet.
  • Keep clearance above and below for airflow.
  • Connect 3-phase AC line to the M10 busbars.
  • Tighten M10 bolts to the torque in the manual.
  • Wire the motor with shielded cable.
  • Ground the shield at both ends.
  • Add a BR.. resistor when braking energy is high.
  • Check R_BRmin of 2.3 Ω before wiring.
  • Use the DC 24 V supply for control power.
  • Add an external 24 V supply for higher load.
  • Fit IP20 covers when touch safety is required.
  • Follow local EMC rules for cabinet wiring.

Commissioning and Maintenance

  • Set motor data in the startup menu.
  • Pick U/f for simple pumps and fans.
  • Pick VFCplus for general loads up to 250 Hz.
  • Pick CFC or ELSM for precise speed and torque control.
  • Use EtherCAT/CiA402 for fast cyclic control.
  • Check fan filters and air paths each service interval.
  • Inspect busbar bolts for tightness once a year.
  • Read fault codes from the fieldbus or keypad.
  • Keep spare /CIO21A and /CID21A cards on site.

Compatibility

  • Works with MOVIDRIVE technology and MOVIDRIVE system setups.
  • Fits the MOVI-C platform.
  • Accepts /CFN21A for PROFINET IO.
  • Accepts /DFE32B for EtherNet/IP.
  • Accepts /DFI11B for PROFIBUS DPV1.
  • Supports /CES11A and /CID21A encoder options.
  • Supports /CS..A MOVISAFE safety cards.
  • Order the /L variant for conformal-coated PCBs.
  • Sized for 132 kW ASM motors in typical duty.

Certifications and Standards

  • Pollution class 2 per IEC 60664-1.
  • Overvoltage category III.
  • Storage class 1K2 per EN 60721-3-1.
  • Transport class 2K3 per EN 60721-3-2.
  • Humidity class 3K3 per EN 60721-3-3.
  • Integrated basic EMC interference suppression.
  • Official product manual is active (last verified 2026-09).

Packing List

  • 1 x MDX91A-2500-503-4-T00 inverter
  • 1 x printed quick start guide
  • 1 x terminal cover set (if IP20 option ordered)
  • Braking resistor BR.. and option cards ship only when ordered
  • Dimension drawings and manual ship as documents

FAQ

Q: Can this unit run without an external 24 V supply?

A: Yes. The built-in 80 W supply covers control power. Add an external supply when your load is higher.

Q: What overload can I expect in practice?

A: The drive gives 150% of I_N at 2.5 kHz PWM. Set PWM to 2.5 kHz for heavy starts.

Q: How do I pick a braking resistor?

A: Never go below 2.3 Ω. Size the resistor for your cycle. Short high-torque stops need more capacity.

Q: Will it work at 8 kHz PWM?

A: Yes, but 8 kHz lowers usable current. Derate when you run quiet or low-noise duty.

Q: Which control mode should I start with?

A: Start with VFCplus for most loads. Switch to CFC or ELSM when you need tight speed or torque control.

Q: Can I mount it at 2000 m altitude?

A: Yes, with derating. Reduce I_N by 1% per 100 m above 1000 m.

Q: What is a common field mistake?

A: Loose M10 busbar bolts cause heat and trips. Recheck torque after the first week of running.

Q: Do I need shielded motor cable?

A: Yes. Shielded cable plus a good ground keeps EMC noise low. This matters more with long runs.

Q: How do I add PROFINET?

A: Fit the /CFN21A card. The system bus stays on EtherCAT/CiA402.

Q: Is this model still supported?

A: Yes. It sits in the current MOVI-C platform line. The manual was last verified in 2026-09.

Specifications

  • BrandSEW-Eurodrive
  • Part NumberMDX91A-2500-503-4-T00
  • ConditionOriginal Brand New

Customers Reviews

There are no reviews yet.

Be the first to review “MDX91A-2500-503-4-T00 SEW MOVIDRIVE Multi-Axis Inverter 250 A”

Your email address will not be published. Required fields are marked *

Back to Top
Product has been added to your cart