Product details
Product Description
Meet the SEW-EURODRIVE MDX91A-0910-503-4-S00, a book-style multi-axis inverter from the MOVIDRIVE modular series. It delivers 91.0 A rated output at 4 kHz PWM with direct 3-phase AC line connection. The unit supports U/f, VFCplus, CFC, and ELSM control modes. It fits space-saving cabinet layouts and handles demanding motion tasks with 4-quadrant operation.
Technical Specifications
- Brand: SEW-EURODRIVE
- Model: MDX91A-0910-503-4-S00
- Series: MOVIDRIVE modular Multi-Axis Inverter (MDX91A)
- Frame size: 6
- Rated output current: 91.0 A at 4 kHz PWM
- Nominal line current: 81.9 A
- Recommended motor power (ASM): 45 kW
- Apparent output power S_N: 56.7 kVA
- Supply voltage: 3 x AC 380–500 V, 50–60 Hz
- Line frequency tolerance: 50–60 Hz ±5%
- Overload capacity: 200% of I_N for 3 s at 4 kHz PWM
- Continuous output current at 0 Hz: I_N x 0.9
- PWM frequency: 4, 8, 16 kHz adjustable
- Max output frequency: U/f 599 Hz; VFCplus 250 Hz; CFC 500 Hz; ELSM 500 Hz
- Nominal DC link voltage: DC 560 V
- Brake chopper continuous power: 56.7 kW; peak 200% x S_N
- Power section nominal power loss: 931 W
- Integrated DC 24 V auxiliary power supply: 80 W, external supplement possible
- Control modes: U/f, VFCplus, CFC, ELSM
- Integrated brake chopper: Yes; optional braking resistor BR..
- Line/motor terminals: M10 copper busbars
- Communication: System bus to MOVI-C CONTROLLER (UHX.. family); EtherCAT/CiA402 internal system bus
- Option cards: /CES11A multi-encoder, /CID21A encoder interface, /CIO21A I/O expansion, /CS..A MOVISAFE safety card, /L conformal-coated PCB
- EMC variant: Basic interference suppression integrated
Environmental & Operating Range
- Operating temperature: 0 to +40 °C without derating; +40 to +60 °C with derating
- Storage temperature: -25 to +70 °C (EN 60721-3-1 class 1K2, non-condensing)
- Transport temperature: -25 to +70 °C (EN 60721-3-2 class 2K3, non-condensing)
- Relative humidity: Non-condensing, no moisture condensation (EN 60721-3-3 class 3K3)
- Protection rating: IP10; optional IP20 with plastic terminal covers
- Pollution class: 2 (IEC 60664-1); overvoltage category III
- Installation altitude: Up to 1000 m without restriction; 1000–3800 m with I_N derating 1% per 100 m
- Weight: 24.1 kg
- Dimensions: Published as Maßbild dimension drawings per size; see product manual section 2.7
Installation Guide
- Mount the unit vertically in a control cabinet.
- Use M10 copper busbars for line and motor connections.
- Keep clearance for airflow above and below the unit.
- Connect the integrated DC 24 V auxiliary supply or add an external source.
- Install an optional braking resistor BR.. if needed.
- Follow the Maßbild drawings for frame size 6 dimensions.
- Use plastic terminal covers to reach IP20 protection.
Commissioning & Maintenance
- Set the control mode: U/f, VFCplus, CFC, or ELSM.
- Adjust PWM frequency to 4, 8, or 16 kHz as required.
- Check the DC link voltage at DC 560 V nominal.
- Use the MOVI-C CONTROLLER for system bus setup.
- Add option cards for encoders, I/O, or safety functions.
- Clean the heat sink and check fan operation at regular intervals.
- Verify terminal torque and busbar tightness during service.
Compatibility Notes
- Works with MOVI-C CONTROLLER (UHX.. family).
- Uses EtherCAT/CiA402 internal system bus protocol.
- Supports option cards: /CES11A, /CID21A, /CIO21A, /CS..A, /L.
- Fits MOVIDRIVE system and MOVIDRIVE technology platforms.
- Pairs with braking resistor BR.. for dynamic braking.
Certifications & Standards
- Pollution class 2 per IEC 60664-1.
- Overvoltage category III.
- Storage per EN 60721-3-1 class 1K2.
- Transport per EN 60721-3-2 class 2K3.
- Humidity per EN 60721-3-3 class 3K3.
- Basic EMC interference suppression integrated.
Package Contents
- 1 x SEW-EURODRIVE MDX91A-0910-503-4-S00 inverter
- 1 x Product manual reference (see section 2.7 for dimensions)
- Terminal covers optional (IP20 version)
- Braking resistor BR.. optional, not included
- Option cards optional, not included
FAQ
Q: What control modes does this inverter support?
A: It supports U/f, VFCplus, CFC, and ELSM control modes.
Q: Can I use this unit at high ambient temperatures?
A: Yes, from +40 to +60 °C with derating.
Q: How do I connect the motor?
A: Use M10 copper busbars for line and motor terminals.
Q: What is the maximum output frequency in U/f mode?
A: It reaches up to 599 Hz in U/f mode.
Q: Does it include a brake chopper?
A: Yes, an integrated brake chopper is standard. An optional BR.. resistor is available.
Q: What communication protocol does the internal bus use?
A: The internal system bus uses EtherCAT/CiA402.
Q: How do I achieve IP20 protection?
A: Add the optional plastic terminal covers.
Q: What is the recommended motor power?
A: The recommended motor power for ASM is 45 kW.
Q: Can I mount this inverter at high altitudes?
A: Yes, up to 1000 m without restriction. From 1000 to 3800 m, derate I_N by 1% per 100 m.
Q: Is this part of an active product line?
A: Yes, it is a current SEW-EURODRIVE product in the MOVI-C platform. Last verified: 2026-09.















There are no reviews yet.