Product details
Product Overview
- Model MDX91A-1130-503-4-T00 is a multi-axis inverter from SEW-EURODRIVE.
- It belongs to the MOVIDRIVE modular Multi-Axis Inverter (MDX91A) series.
- This book-style unit is designed for control-cabinet use.
- It supports direct 3-phase AC line connection.
- Frame size is 6. It offers 4-quadrant operation.
- Rated output is 113.0 A at 4 kHz PWM.
- An integrated DC 24 V auxiliary supply delivers 80 W.
- You can add an external 24 V supply if needed.
- Control modes include U/f, VFCplus, CFC, and ELSM.
- The built-in brake chopper supports optional braking resistors (BR..).
- Line and motor terminals use M10 copper busbars.
- The unit is part of the MOVI-C platform.
Technical Specifications
- Brand: SEW-EURODRIVE
- Model: MDX91A-1130-503-4-T00
- Series: MOVIDRIVE modular Multi-Axis Inverter (MDX91A)
- Supply voltage: 3 x AC 380–500 V nominal, 50–60 Hz
- Line frequency tolerance: 50–60 Hz ±5%
- Nominal line current: 102.0 A
- Rated output current: 113.0 A at f_PWM = 4 kHz
- Recommended motor power (ASM): 55 kW
- Apparent output power S_N: 70.2 kVA
- Overload capacity: 200% of I_N for 3 s at 4 kHz PWM
- Continuous output current at 0 Hz: I_N x 0.9
- PWM frequency: 4, 8, or 16 kHz, adjustable
- Max output frequency: U/f 599 Hz; VFCplus 250 Hz; CFC 500 Hz; ELSM 500 Hz
- Nominal DC link voltage: DC 560 V
- Brake chopper continuous power: 70.2 kW
- Brake chopper peak power: 200% x S_N
- Power section nominal power loss: 1132 W
- EMC variant: basic interference suppression integrated
- Operating temperature: 0 to +40 °C without derating; +40 to +60 °C with derating
- Storage temperature: -25 to +70 °C (EN 60721-3-1 class 1K2, non-condensing)
- Transport temperature: -25 to +70 °C (EN 60721-3-2 class 2K3, non-condensing)
- Relative humidity: non-condensing, no moisture condensation (EN 60721-3-3 class 3K3)
- Protection rating: IP10; optional IP20 with plastic terminal covers
- Pollution class: 2 (IEC 60664-1); overvoltage category III
- Installation altitude: up to 1000 m without restriction; 1000–3800 m with I_N derating of 1% per 100 m
- Weight: 24.1 kg
- Dimensions (H×W×D): not published as a numerical table; see product manual section 2.7 for Maßbild dimension drawings per size
Installation Guide
- Mount the inverter in a control cabinet with adequate ventilation.
- Keep the specified temperature range in mind during installation.
- Use M10 copper busbars for line and motor connections.
- Ensure proper grounding and short cable runs.
- Install optional plastic terminal covers to achieve IP20 protection.
- Observe the derating rules for altitudes above 1000 m.
- Provide external 24 V supply only if the integrated 80 W is insufficient.
Commissioning and Maintenance Convenience
- Start-up is straightforward thanks to integrated control modes.
- Select U/f, VFCplus, CFC, or ELSM based on your application.
- The built-in brake chopper simplifies braking resistor setup.
- Use the system bus for fast EtherCAT/CiA402 commissioning.
- Regularly check fan operation and clean dust from heat sinks.
- Verify terminal tightness at scheduled maintenance intervals.
- Store spare parts in a dry, non-condensing environment.
Compatibility Notes
- Works with EtherCAT/CiA402 on the system bus.
- Add fieldbus cards for PROFINET IO (/CFN21A), EtherNet/IP (/DFE32B), or PROFIBUS DPV1 (/DFI11B).
- Expansion options include /CES11A multi-encoder, /CID21A encoder interface, /CIO21A I/O expansion, /CS..A MOVISAFE safety card, and /L conformal-coated PCB.
- Compatible with standard 3-phase AC 380–500 V supplies.
- Use recommended braking resistors from the SEW selection table.
- Pairs with ASM motors up to 55 kW recommended power.
Certification Information
- Designed to meet IEC 60664-1 pollution class 2 and overvoltage category III.
- EMC behavior follows basic interference suppression integrated as standard.
- Environmental classes: EN 60721-3-1 (1K2), EN 60721-3-2 (2K3), EN 60721-3-3 (3K3).
- Official product manual is active. Last verified: 2026-09.
- Always confirm local certification requirements before installation.
Package Contents
- 1x MDX91A-1130-503-4-T00 inverter unit
- 1x product documentation set
- Optional plastic terminal covers only if ordered
- Optional braking resistor and expansion cards are sold separately
FAQ
- Q: What is the rated output current of this model?
A: The unit delivers 113.0 A at 4 kHz PWM. - Q: Can I use this inverter without an external 24 V supply?
A: Yes. The integrated 80 W DC 24 V supply often covers basic needs. - Q: Which fieldbus options are available?
A: You can add PROFINET IO, EtherNet/IP, or PROFIBUS DPV1 cards. - Q: What is the maximum output frequency in CFC mode?
A: CFC mode supports up to 500 Hz. - Q: How should I handle high installation altitudes?
A: Above 1000 m, derate I_N by 1% per 100 m up to 3800 m. - Q: Is IP20 protection available?
A: Yes. Add plastic terminal covers to reach IP20. - Q: What maintenance tasks are most common?
A: Check fan operation, clean heat sinks, and verify terminal tightness. - Q: Can this unit run in 4-quadrant operation?
A: Yes. It supports 4-quadrant operation with the integrated brake chopper.















There are no reviews yet.