Product details
Product Overview
- Model MDX91A-0095-5E3-4-T00 is a SEW-EURODRIVE MOVIDRIVE modular multi-axis inverter for cabinet installation.
- It delivers 9.5 A rated output at 4 kHz PWM with direct 3-phase AC line connection.
- Book-style frame size 2 design supports 4-quadrant operation and saves cabinet space.
- Integrated DC 24 V auxiliary supply (80 W) can be backed by an external source.
- Control modes cover U/f, VFCplus, CFC and ELSM for async and synchronous motors.
- Built-in brake chopper works with optional BR.. braking resistors.
- Line and motor terminals use plug connectors for fast wiring.
- An integrated EMC filter (C2, EN 61800-3) cuts extra cabinet parts.
- The unit belongs to the MOVI-C platform and stays in the current SEW product line.
Key Technical Data
- Brand: SEW-EURODRIVE
- Model: MDX91A-0095-5E3-4-T00
- Series: MOVIDRIVE MDX91A modular multi-axis inverter
- Supply voltage: 3 x AC 380-500 V nominal, 50-60 Hz
- Line frequency tolerance: 50-60 Hz, plus or minus 10%
- Nominal line current: 8.55 A
- Rated output current: 9.5 A at f_PWM = 4 kHz
- Recommended motor power (ASM): 4 kW
- Apparent output power S_N: 8.8 kVA
- Overload capacity: 200% of I_N for 3 s at 4 kHz PWM
- Continuous current at 0 Hz: I_N x 0.9
- PWM frequency: 4, 8 or 16 kHz, adjustable
- Max output frequency: U/f 599 Hz, VFCplus 250 Hz, CFC 500 Hz, ELSM 500 Hz
- Nominal DC link voltage: DC 560 V
- Minimum braking resistance R_BRmin: 479 Ω
- Brake chopper power: 8.8 kW continuous, 200% x S_N peak
- Power section loss: 58 W nominal
- Control modes: U/f, VFCplus, CFC, ELSM
Environment and Durability
- Operating temperature: 0 to +40 °C without derating
- Extended range: +40 to +60 °C with derating
- Storage and transport: -25 to +70 °C, non-condensing
- Humidity: non-condensing, no moisture condensation (3K3)
- Protection rating: IP20 acc. to EN 60529
- Pollution class: 2 (IEC 60664-1), overvoltage category III
- Installation altitude: up to 1000 m without restriction
- High altitude: 1000-3800 m with 1% I_N derating per 100 m
- Noise immunity: built-in EMC filter supports class C2 limits
Communication and Compatibility
- Built-in system bus: EtherCAT / CiA402 for fieldbus control
- Fieldbus option cards: /CFN21A PROFINET IO, /DFE32B EtherNet/IP, /DFI11B PROFIBUS DPV1
- Expansion cards: /CES11A multi-encoder, /CID21A encoder interface, /CIO21A I/O expansion
- Safety option: /CS..A MOVISAFE safety card
- Coating option: /L conformal-coated PCB for harsh air
- Platform fit: works inside the MOVI-C and MOVIDRIVE system
- Motor fit: suits async motors around 4 kW and synchronous motors with ELSM
Mounting Guide
- Mount the book-style unit vertically in a control cabinet.
- Keep clear space above and below for cooling air.
- Use the plug connectors for line, motor and 24 V wires.
- Tighten terminals to the torque given in the official manual.
- Wire the braking resistor only if the application needs braking.
- Connect the EtherCAT system bus with standard shielded cable.
- Check IP20 cabinet protection after all covers are closed.
Setup and Maintenance
- Startup uses SEW MOVISUITE engineering software.
- Parameter sets load fast through the fieldbus interface.
- The plug-in terminal design shortens device swap time.
- Fans and filter mats need regular cleaning in dusty rooms.
- Check the DC link and brake chopper during service.
- Store spare units in dry, non-condensing rooms.
Certifications and Standards
- EMC: EN 61800-3, limit value class C2 with integrated filter
- Protection: EN 60529, IP20
- Clearance and creepage: IEC 60664-1, pollution class 2
- Climate classes: EN 60721-3-1 (1K2), 3-2 (2K3), 3-3 (3K3)
Scope of Delivery
- 1 x MDX91A-0095-5E3-4-T00 inverter unit
- 1 x plug connector set for line and motor
- 1 x printed quick start guide
- Option cards and braking resistors are ordered separately
FAQ
- Can this inverter run a 4 kW async motor?
- Yes. SEW recommends 4 kW ASM power for this model.
- Does it include a braking resistor?
- No. The chopper is built in, but BR.. resistors come as options.
- What bus does it use out of the box?
- The unit ships with EtherCAT / CiA402 on the system bus.
- Can I add PROFINET later?
- Yes. Fit the /CFN21A card to get PROFINET IO.
- Is the EMC filter internal?
- Yes. The filter meets class C2 limits per EN 61800-3.
- How do I handle high altitudes?
- Above 1000 m, derate I_N by 1% for every 100 m.
- What is a common field mistake?
- Many users forget the 0 Hz current limit of I_N x 0.9. Plan torque margin early.
- Why does the unit trip at high PWM?
- Higher PWM reduces output current headroom. Check derating before you raise it.














There are no reviews yet.