Product details
Product Overview
- MDX91A-0040-5E3-4-T00 is a multi-axis inverter from SEW-EURODRIVE.
- It belongs to the MOVIDRIVE modular Multi-Axis Inverter (MDX91A) series.
- This book-style control-cabinet unit delivers 4.0 A rated output at 4 kHz PWM.
- It connects directly to 3~AC line supply for flexible integration.
- The frame size 1 design supports 4-quadrant operation with energy recovery.
- An integrated DC 24 V auxiliary power supply (80 W) is included.
- Control modes cover U/f, VFCplus, CFC, and ELSM for various motor types.
- A built-in brake chopper enables safe braking with optional resistors.
- Line and motor terminals use plug connectors (0.25–4 mm²) for fast wiring.
- The integrated EMC filter meets limit value class C2 per EN 61800-3.
- This unit is part of the MOVI-C platform and the official product manual is active.
Technical Specifications
- Brand: SEW-EURODRIVE
- Model: MDX91A-0040-5E3-4-T00
- Series: MOVIDRIVE modular Multi-Axis Inverter (MDX91A)
- Supply voltage: 3 x AC 380–500 V nominal, 50–60 Hz
- Line frequency tolerance: 50–60 Hz ±10%
- Nominal line current: 3.6 A
- Rated output current (f_PWM = 4 kHz): 4.0 A
- Recommended motor power (ASM): 1.5 kW
- Apparent output power S_N: 3.7 kVA
- Overload capacity: 200% of I_N for 3 s at 4 kHz PWM; continuous 100% x I_N at 4 kHz PWM
- Continuous output current at f = 0 Hz: I_N x 0.9
- PWM frequency: 4, 8, 16 kHz adjustable
- Max output frequency: U/f 599 Hz; VFCplus 250 Hz; CFC 500 Hz; ELSM 500 Hz
- Nominal DC link voltage: DC 560 V
- Minimum braking resistance R_BRmin: 95 Ω
- Brake chopper continuous power: 3.7 kW; peak power 200% x S_N
- Power section nominal power loss: 27 W
- Operating temperature: 0 to +40 °C without derating; +40 to +60 °C with derating
- Storage temperature: -25 to +70 °C (EN 60721-3-1 class 1K2, non-condensing)
- Transport temperature: -25 to +70 °C (EN 60721-3-2 class 2K3, non-condensing)
- Relative humidity: non-condensing, no moisture condensation (EN 60721-3-3 class 3K3)
- Protection rating: IP20 (EN 60529)
- Pollution class: 2 (IEC 60664-1); overvoltage category III
- Installation altitude: up to 1000 m without restriction; 1000–3800 m with I_N derating 1% per 100 m
- Dimensions (H×W×D): 479×95×215 mm (height with shield plates)
- Weight: 4.1 kg
- Communication built-in: System bus EtherCAT / CiA402 (MOVIDRIVE technology variant, fieldbus control)
- Protocols: EtherCAT/CiA402 on system bus; fieldbus options via cards (/CFN21A PROFINET IO, /DFE32B EtherNet/IP, /DFI11B PROFIBUS DPV1)
- Communication expansion: Option cards: /CES11A multi-encoder, /CID21A encoder interface, /CIO21A I/O expansion, /CS..A MOVISAFE safety card, /L conformal-coated PCB
Installation Guide
- Mount the inverter vertically inside a control cabinet with IP20 protection.
- Keep clearance for airflow above and below the unit.
- Use the plug connectors for line and motor wiring (0.25–4 mm²).
- Tighten terminals to the torque specified in the manual.
- Connect the DC 24 V auxiliary supply or use an external supplement.
- Install an optional braking resistor BR.. if high braking energy occurs.
- Wire the EtherCAT system bus with shielded cables for reliable data.
- Ensure protective earth connection before power-up.
- Observe EMC class C2 wiring practices for the integrated filter.
- For altitudes above 1000 m, apply 1% current derating per 100 m.
Commissioning and Maintenance Convenience
- Auto-tuning simplifies motor parameter setup for CFC and ELSM modes.
- Use the MOVISAFE option card for integrated safety functions.
- Front-access plug connectors speed up service replacement.
- The built-in brake chopper reduces external wiring effort.
- Conformal coating option /L protects the PCB in harsh environments.
- EtherCAT diagnostics support fast fault finding over the network.
- No routine maintenance is needed beyond clean airflow checks.
- Store spare option cards for quick field upgrades.
Compatibility Notes
- Works with asynchronous motors (ASM) up to 1.5 kW recommended.
- Supports synchronous motors via ELSM control mode.
- Fieldbus options include /CFN21A PROFINET IO and /DFE32B EtherNet/IP.
- Encoder interfaces /CES11A and /CID21A expand feedback choices.
- I/O expansion card /CIO21A adds digital and analog points.
- Safety card /CS..A MOVISAFE fits the same option slot.
- Integrates into the MOVI-C platform for unified engineering.
- Connects to EtherCAT / CiA402 networks without extra gateway.
Certifications and Standards
- EMC: EN 61800-3, limit value class C2 with integrated filter.
- Protection rating: IP20 per EN 60529.
- Pollution class: 2 per IEC 60664-1; overvoltage category III.
- Storage: EN 60721-3-1 class 1K2, non-condensing.
- Transport: EN 60721-3-2 class 2K3, non-condensing.
- Operation: EN 60721-3-3 class 3K3 for relative humidity.
- Part of the SEW-EURODRIVE MOVI-C platform with active product manual.
Package Contents
- MDX91A-0040-5E3-4-T00 inverter unit.
- Plug connectors for line and motor terminals.
- Shield plates for EMC-compliant installation.
- Safety and installation leaflet with terminal torques.
- No braking resistor included; order BR.. separately.
- Option cards are not included unless specified in the order.
FAQ
- What motors does this inverter drive?
- It runs asynchronous motors and synchronous motors in CFC or ELSM mode.
- Can I use a braking resistor?
- Yes, add an optional BR.. resistor; minimum resistance is 95 Ω.
- What is the overload capability?
- It delivers 200% of I_N for 3 s at 4 kHz PWM.
- How do I connect to a fieldbus?
- Use the built-in EtherCAT port or add a fieldbus card such as /CFN21A.
- Does it work at high altitude?
- Up to 1000 m without restriction; above that, derate 1% per 100 m.
- What is the minimum PWM frequency?
- 4 kHz is the lowest setting; 8 and 16 kHz are also selectable.
- Is a safety card available?
- Yes, the /CS..A MOVISAFE card fits the option slot.
- What protection rating does it have?
- It is rated IP20 and must sit inside an enclosure.
- Can I coat the PCB for harsh air?
- Order the /L conformal-coated PCB option for extra protection.
- What is the DC link voltage?
- The nominal DC link voltage is DC 560 V.















There are no reviews yet.