Product details
Product Overview
- The MDA90A-1000-503-X-S00 is a single-axis inverter module from SEW-EURODRIVE.
- It sits on the MOVIDRIVE® modular platform and draws power from a shared DC link.
- It delivers 100 A rated output and drives one motor up to 45 kW (typical ASM).
- The S00 suffix adds integrated STO (Safe Torque Off) to EN 61800-5-2.
- Energy-saving standby cuts idle power by up to 89%.
Model Suffix Breakdown
- MDA90A-1000-503-X-S00
- MDA90A — MOVIDRIVE® modular single-axis inverter module
- 1000 — size and performance class, 100 A rated output
- 503 — base variant code; electrical data matches MDA90A-1000-503-X-000
- X — standard hardware configuration
- S00 — integrated STO safety function, EN 61800-5-2
Technical Specifications
- Brand: SEW-EURODRIVE
- Model: MDA90A-1000-503-X-S00
- Series: MOVIDRIVE® modular single-axis module
- Module type: single-axis inverter, DC-link powered
- Rated output current: 100 A
- Overload capacity: 250% of rated current for max. 1 second
- Typical motor power (ASM): 45 kW
- DC link voltage: 750 V (380–400 V line) / 800 V (480–500 V line)
- Output frequency: U/f 599 Hz, VFCplus 250 Hz, CFC 500 Hz, ELSM 500 Hz max.
- Auxiliary supply: DC 24 V (−10% / +20%), terminal X5
- Encoder supply: peak 1000 mA, terminal X15
- Operating temperature: 0 to +45 °C, no derating
- Storage temperature: −25 to +70 °C, non-condensing
- Protection rating: IP20; install inside a closed cabinet
- System bus: EtherCAT / SBusPLUS via backplane (X30)
- Dimensions: per SEW size-1000 drawing; base plate width 150 mm, depth 355 mm
- EMC best practice: shielded motor cables, route control wires away from power runs
Installation Guide
- Mount the unit on a flat, vibration-free panel inside an IP20-rated cabinet.
- Connect the DC link through the backplane to a matching MDP90A or MDR90B supply module.
- Wire the motor to U/V/W; use terminals or X2 copper bars per the size drawing.
- Apply DC 24 V at X5 and the encoder supply at X15 (peak 1000 mA).
- Keep clear air gaps above and below for convection cooling.
- Tighten power terminals to the torque value in the hardware manual.
Commissioning and Maintenance
- Set up and tune the drive with SEW DriveConfigurator software.
- Test the STO safety circuit before the first machine run.
- Save the parameter set to speed up future module swaps.
- Modular design lets you replace one axis without rewiring the DC link.
- Enable energy-saving standby to cut idle power by up to 89%.
- Check cooling fans and terminal torque during scheduled service.
Compatibility
- Pairs with MDP90A / MDR90B supply modules on the shared DC link.
- Communicates over EtherCAT or SBusPLUS via the backplane system bus.
- Accepts option cards: /CES11A (multi-encoder), /CID21A (encoder interface), /CIO21A (I/O), /CS..A (safety), /L (conformal coated PCB).
- Drives standard asynchronous and synchronous motors; verify rating in the motor assignment table.
- Electrical data matches base model MDA90A-1000-503-X-000; S00 adds STO only.
- Legacy MOVIDRIVE modular platform; MOVI-C® is the successor system.
Certifications and Safety
- Integrated STO certified to EN 61800-5-2 (S00 variant).
- STO removes torque without external contactors for stop category 0.
- Standard SEW-EURODRIVE declarations of conformity apply; request the latest DoC.
- Conformal coating available via the /L option for harsh environments.
Package Contents
- 1 × MDA90A-1000-503-X-S00 single-axis inverter module
- Factory installation and safety documentation
- Verify all items against the packing list on receipt; report shortages promptly.
Frequently Asked Questions
- Q: Can this axis unit run directly from mains voltage?
A: No. It draws power from the shared DC link; pair it with an MDP90A or MDR90B supply module sized to your line. - Q: What does the S00 ending change versus the standard variant?
A: S00 adds built-in Safe Torque Off certified to EN 61800-5-2. All electrical ratings stay identical to the base model. - Q: How much motor power does the 100 A class support?
A: A typical asynchronous assignment is 45 kW. Always confirm your motor in the SEW motor assignment table. - Q: Will the drive overheat in a warm control cabinet?
A: It holds full rating from 0 to +45 °C with no derating. Above that, add cabinet cooling or reduce load. - Q: Can I add encoder, I/O, or safety options after purchase?
A: Yes. Slot in /CES11A, /CID21A, /CIO21A, or /CS..A cards at any time. The /L variant adds conformal coating. - Q: Is this part still current, or has SEW replaced it?
A: It is a legacy MOVIDRIVE modular item. SEW still lists it in DriveConfigurator; new designs often use the MOVI-C® platform.














There are no reviews yet.