Over 50,000 hot-selling automation module components.

MDA90A-1400-503-X-S00 | SEW MOVIDRIVE 140A Axis Module with STO

0 Reviews
In stock
  • 100% genuine products in stock with fast delivery.
  • 30-day return policy for quality assurance.
  • 12-month warranty for peace of mind.
SKU: MDA90A-1400-503-X-S00
Brands:

Product details

Overview

The MDA90A-1400-503-X-S00 is a SEW-EURODRIVE MOVIDRIVE® modular single-axis inverter module. It delivers 140 A rated output and drives one motor from a shared DC bus. It cannot run alone — pair it with an MDP90A or MDR90B supply module. The S00 suffix adds integrated Safe Torque Off (STO) to EN 61800-5-2. All electrical ratings match the base MDA90A-1400-503-X-000; only the safety option differs. A typical ASM load is about 75 kW.

Lifecycle note: MOVIDRIVE modular is a legacy platform, succeeded by MOVI-C®. This module fits spares and existing lines.

Technical Specifications

  • Brand: SEW-EURODRIVE
  • Model: MDA90A-1400-503-X-S00 (STO variant of MDA90A-1400-503-X-000)
  • Series: MOVIDRIVE® modular single-axis module
  • Order-code tree:
    • MDA90A — single-axis inverter module platform
      • -1400 — performance segment: 140 A rated output
        • -503 — voltage segment: 380–500 V AC line (DC link 750–800 V)
          • -X — standard hardware variant
            • -S00 — integrated STO option (base -000 has no integrated STO)
  • Electrical data:
    • Rated output current: 140 A (performance class)
    • Overload: up to 250% of rated current for 1 s max
    • DC link voltage: 750–800 V DC (380–400 V line → 750 V; 480–500 V line → 800 V)
    • Supply: via DC link only — no mains input on this module
    • Max output frequency: U/f 599 Hz / VFCplus 250 Hz / CFC 500 Hz / ELSM 500 Hz
    • Typical motor power (ASM): 75 kW
    • Auxiliary supply: 24 V DC (–10% / +20%) at terminal X5
    • Encoder supply (X15): peak 1000 mA
    • Energy-saving standby cuts idle power by up to 89%
  • Safety & protection:
    • Integrated STO (Safe Torque Off) per EN 61800-5-2 (S00 variant)
    • Enclosure rating: IP20 — install inside a cabinet
  • Communication:
    • System bus via backplane (X30): EtherCAT / SBusPLUS
    • Option cards: /CES11A (multi-encoder), /CID21A (encoder), /CIO21A (I/O), /CS..A (safety), /L (conformal coated PCB)
  • Environmental:
    • Operating temperature: 0 to +45 °C — no derating in this range
    • Storage temperature: –25 to +70 °C, non-condensing
  • Mechanical:
    • Motor terminals U/V/W (larger frames use X2 copper bars)
    • Base plate width 210 mm, depth 355 mm; full sizes in SEW Maßbild drawings
  • Lifecycle status: Legacy MOVIDRIVE modular product; data still in SEW DriveConfigurator; successor is MOVI-C® (verified 2026-09).

Installation Guide

  • Mount the unit vertically in an IP20-rated cabinet; keep the clearance from the SEW dimension drawing.
  • Connect the shared DC bus from an MDP90A or MDR90B supply module. This unit has no mains input.
  • Wire the 24 V DC control supply to terminal X5 (tolerance –10% / +20%).
  • Connect the motor to U/V/W. On larger frames use the X2 copper bar set and torque to spec.
  • Plug encoders into X15 (peak 1000 mA) or add an encoder option card for multi-encoder setups.
  • Keep ambient below 45 °C to avoid derating; protect the unit from dust and condensation.

Commissioning & Maintenance

  • Commission over the backplane system bus (EtherCAT/SBusPLUS at X30) with SEW engineering tools.
  • Add fieldbus, encoder, I/O or safety functions by slotting option cards — no DC-bus rewiring.
  • Enable energy-saving standby to cut idle power by up to 89% across multi-axis lines.
  • Swap a faulty axis module without touching power wiring — the DC bus and backplane stay in place.
  • Check periodically: mounting torque, airflow, connector tightness and cabinet temperature.
  • Use the latest SEW firmware and manual before first power-up.

Compatibility

  • Not a standalone drive. It needs an MDP90A or MDR90B supply module on the same DC link.
  • Works inside a MOVIDRIVE modular multi-axis system with other MDA90A axis modules.
  • Drives induction (ASM) and servo motors; typical ASM rating is about 75 kW at 140 A.
  • Expand with /CES11A, /CID21A, /CIO21A, /CS..A safety cards and the /L conformal-coated PCB option.
  • For new designs, evaluate MOVI-C®; use this unit for spares and existing machines.

Certifications & Standards

  • STO function certified to EN 61800-5-2 (integrated on the S00 variant).
  • Enclosure protection: IP20 per IEC 60529.
  • Install per SEW manual to meet applicable EMC and low-voltage requirements.
  • Ask for the manufacturer declaration for the full certificate set (CE/UL etc. as issued).

Package Contents

  • 1 × MDA90A-1400-503-X-S00 single-axis inverter module with integrated STO.
  • Factory mounting hardware shipped by SEW-EURODRIVE.
  • Digital documentation link for the latest manual.
  • Supply module (MDP90A/MDR90B), option cards, motor and encoder cables ordered separately.

FAQ

  • Can this module power a motor by itself?
    No. It draws energy from a shared DC bus. Add an MDP90A or MDR90B supply module and 24 V control power.
  • What changes between S00 and the 000 base unit?
    Only the safety option. S00 adds integrated STO to EN 61800-5-2; all electrical ratings stay identical.
  • Should I design it into a new machine?
    MOVIDRIVE modular is legacy and MOVI-C® is the current platform. Use this unit for spares or existing lines; pick MOVI-C® for new builds.
  • Which motor size matches the 140 A output?
    A typical ASM assignment is about 75 kW. Final sizing depends on overload duty and encoder feedback — check SEW DriveConfigurator.
  • How do I add encoders, I/O or fieldbus later?
    Slide in an option card (/CES11A, /CID21A, /CIO21A, /CS..A or /L). The DC bus and backplane wiring stay untouched.
  • My cabinet runs warm — will the drive lose output?
    Up to 45 °C ambient there is no derating. Above that, reduce load or add cooling. Keep the IP20 unit in a clean, dry panel.

Specifications

  • BrandSEW-Eurodrive
  • Part NumberMDA90A-1400-503-X-S00
  • ConditionOriginal Brand New

Customers Reviews

There are no reviews yet.

Be the first to review “MDA90A-1400-503-X-S00 | SEW MOVIDRIVE 140A Axis Module with STO”

Your email address will not be published. Required fields are marked *

Back to Top
Product has been added to your cart