Over 50,000 hot-selling automation module components.

MDA90A-0640-503-X-S00 SEW Single-Axis Drive 64A with STO Safety

0 Reviews
In stock
  • 100% genuine products in stock with fast delivery.
  • 30-day return policy for quality assurance.
  • 12-month warranty for peace of mind.
SKU: MDA90A-0640-503-X-S00
Brands:

Product details

Product Description

The MDA90A-0640-503-X-S00 is a high-current single-axis inverter from SEW-EURODRIVE. It sits on the MOVIDRIVE® modular platform and controls one motor over a shared DC link. Rated output reaches 64 A. The S00 code adds built-in Safe Torque Off (STO) to EN 61800-5-2. Electrical ratings follow the base model MDA90A-0640-503-X-000. A typical asynchronous motor is 30 kW. Full data remains available in SEW DriveConfigurator.

Order Code Breakdown

  • MDA90A-0640-503-X-S00 — full order code
    • MDA90A — MOVIDRIVE® modular single-axis inverter, DC-link powered
      • 0640 — 64 A rated output current (performance class)
        • 503 — device variant code; base electrical parameters apply
          • X — standard factory configuration code
            • S00 — integrated STO safety variant (000 = no integrated safety)

    Technical Specifications

    • Identity
      • Brand: SEW-EURODRIVE
      • Model: MDA90A-0640-503-X-S00
      • Series: MOVIDRIVE® modular single-axis module
      • Type: single-axis inverter module (DC link powered)
    • Electrical Data
      • DC link voltage: 750–800 V DC (380–400 V line → 750 V; 480–500 V → 800 V)
      • Rated output current: 64 A
      • Overload: 250 % of rated current for max. 1 s
      • Output frequency: U/f 599 Hz · VFCplus 250 Hz · CFC 500 Hz · ELSM 500 Hz (max.)
      • Auxiliary supply: DC 24 V (−10 % / +20 %)
      • Standby consumption not published for this size; energy-saving standby cuts draw by up to 89 %
      • Typical motor power: 30 kW asynchronous (ASM)
    • Safety
      • Integrated STO per EN 61800-5-2 (S00 variant)
    • Communication & Options
      • System bus via backplane (X30): EtherCAT / SBusPLUS
      • Option cards: /CES11A (multi-encoder), /CID21A (encoder), /CIO21A (I/O), /CS..A (safety), /L (conformal coating)
    • Terminals
      • Motor U/V/W (sizes 1–2 via terminals; sizes 3–5 via X2 copper bars)
      • 24 V aux: X5; encoder supply peak 1000 mA: X15
    • Environmental
      • Operating temp: 0 to +45 °C (no derating)
      • Storage temp: −25 to +70 °C (non-condensing)
      • Protection: IP20 — cabinet installation required
    • Mechanical
      • Base plate width 120 mm; depth 355 mm (full dimensions per size drawing)
    • Lifecycle
      • Legacy MOVIDRIVE® modular platform; successor is MOVI-C® (data verified 2026-09)

    Key Benefits at a Glance

    • One 64 A module drives a full 30 kW motor and still delivers 250 % peak for high-inertia starts.
    • Built-in STO removes external safety contactors and shortens panel wiring.
    • A shared DC bus feeds several axes and recovers braking energy across the cabinet.
    • Option cards slot in later for extra encoders, I/O, safety or fieldbus.
    • Idle power drops by up to 89 % with energy-saving standby.

    Installation Guide

    • Mount vertically on a panel or backplane inside an IP20 control cabinet.
    • Keep clear top and bottom air gaps; stay within 0 to +45 °C to avoid derating.
    • Power the DC link from an MDP90A or MDR90B supply module.
    • Connect motor leads to U/V/W (larger frames use X2 copper bars).
    • Wire 24 V aux to X5 and the encoder to X15.
    • Route motor cables away from signal and STO wiring to cut interference.
    • Close the STO circuit with a safety controller before enabling the drive.
    • Torque all power terminals to the value in the dimension drawing.

    Commissioning & Maintenance

    • Configure and tune in SEW DriveConfigurator or MOVITOOLS® Studio.
    • Run motor auto-identification; back up parameters for spare-unit cloning.
    • Front LEDs report run state and fault codes without opening the cabinet.
    • Modular construction allows replacement of one axis without touching neighbors.
    • Option cards plug in from the front; power wiring stays untouched.
    • Confirm firmware in the tool; flash only SEW-approved releases.

    Compatibility

    • Pairs with MOVIDRIVE® modular supply modules MDP90A and MDR90B.
    • Shares one DC link with other MDA90A axis modules in the same cabinet.
    • Accepts /CES11A, /CID21A, /CIO21A, /CS..A and /L option cards.
    • Supports EtherCAT and SBusPLUS over the backplane system bus.
    • Not drop-in compatible with MOVI-C®; choose MOVI-C® for new projects.

    Certifications

    • STO safety function certified to EN 61800-5-2 (S00 variant).
    • CE marked for the European market; request UL/cUL or marine certificates from the datasheet.
    • Conformal-coated PCB available via /L option for harsh environments.

    Package Contents

    • 1 × MDA90A-0640-503-X-S00 single-axis inverter module
    • Mounting screws supplied by SEW-EURODRIVE
    • Quick-start guide and safety notes (digital via QR code)
    • Factory-default parameters load on the unit before shipping

    Frequently Asked Questions

    • Q: Does the S00 variant require an external safety relay?
    • A: No. Safe Torque Off is integrated. Connect the safety controller straight to the STO terminals.
    • Q: Can I replace a 000 unit with this S00 module?
    • A: Yes. Electrical ratings match; only the built-in safety function differs. Map STO in your circuit.
    • Q: Which supply module feeds this inverter?
    • A: Use an MDP90A or MDR90B supply module to build the shared DC link.
    • Q: What motor size suits a 64 A output?
    • A: A 30 kW asynchronous motor is typical. Check the MOVIDRIVE motor assignment table to confirm.
    • Q: How long does the 250 % overload last?
    • A: One second maximum, then the drive returns to the 64 A rated level.
    • Q: Can I add fieldbus or encoders after purchase?
    • A: Yes. Slot in /CES11A, /CID21A, /CIO21A or /CS..A cards as the application grows.
    • Q: [Field experience] Overcurrent trips during acceleration — why?
    • A: The 250 % peak holds for only 1 s. Lengthen the ramp time or check motor cable length.
    • Q: [Field experience] STO trips randomly in service?
    • A: Use shielded safety wiring, keep STO leads away from motor cables, and verify 24 V at X5.
    • Q: [Field experience] How should I plan spares?
    • A: The platform is legacy. Hold critical spares on site; specify MOVI-C® for new machines.

Specifications

  • BrandSEW-Eurodrive
  • Part NumberMDA90A-0640-503-X-S00
  • ConditionOriginal Brand New

Customers Reviews

There are no reviews yet.

Be the first to review “MDA90A-0640-503-X-S00 SEW Single-Axis Drive 64A with STO Safety”

Your email address will not be published. Required fields are marked *

Back to Top
Product has been added to your cart