Product details
Product Overview
- The MDA90A-0320-503-X-S00 is a single-axis inverter module from SEW-EURODRIVE.
- It belongs to the MOVIDRIVE® modular platform, powered by a shared DC link.
- It drives one motor with 32 A rated output, typically matched to a 15 kW asynchronous motor.
- The S00 suffix means integrated Safe Torque Off (STO) per EN 61800-5-2, ready out of the box.
- Four control modes cover simple loads to high-dynamic servo: U/f, VFCplus, CFC, and ELSM.
- EtherCAT/SBusPLUS system bus runs over the backplane (X30). Option cards add encoders, I/O, and safety.
- Note: This is a legacy MOVIDRIVE modular part. SEW now promotes MOVI-C®, but this module remains a proven spare for installed systems.
Technical Specifications
- Brand: SEW-EURODRIVE
- Model: MDA90A-0320-503-X-S00
- Base model: MDA90A-0320-503-X-000 (electrical parameters identical)
- Series: MOVIDRIVE® modular Single-Axis Module
- Model code structure:
- MDA90A → MOVIDRIVE® modular single-axis module
- 0320 → 32 A rated output current
- 503 → voltage / performance class code
- X → option code
- S00 → integrated STO (Safe Torque Off) variant
- Electrical ratings:
- Supply: via DC link (pair with MDP90A or MDR90B supply module)
- DC link voltage: 750–800 V DC (380–400 V line → 750 V; 480–500 V line → 800 V)
- Rated output current: 32 A (performance class)
- Typical motor power: 15 kW (ASM, per SEW motor assignment table)
- Overload capacity: 250% of rated current for max 1 s
- Max output frequency: U/f 599 Hz; VFCplus 250 Hz; CFC 500 Hz; ELSM 500 Hz
- Auxiliary supply: DC 24 V (-10% / +20%) at X5
- Standby power: 4.3 W; energy-saving standby cuts consumption up to 89%
- Encoder supply: peak 1000 mA at X15
- Motor connection:
- Terminals U/V/W (sizes 1–2 via screw terminals; sizes 3–5 via X2 copper bars)
- Integrated STO safety inputs per EN 61800-5-2 (S00 variant)
- Communication & options:
- System bus: EtherCAT / SBusPLUS via backplane (X30)
- CES11A: multi-encoder option card
- CID21A: encoder interface option card
- CIO21A: I/O expansion option card
- CS..A: safety option card
- /L: conformal coated PCB for harsh environments
- Environmental ratings:
- Operating temperature: 0 to +45 °C (no derating)
- Storage temperature: -25 to +70 °C, non-condensing
- Humidity: non-condensing
- Protection rating: IP20
- Physical data:
- Base plate width: 90 mm
- Depth: 355 mm
- Height and weight: refer to SEW dimension drawing (Maßbild) per size
Installation Guide
- Mount the module on a flat vertical panel inside a control cabinet.
- Connect it to the DC link busbar alongside other MOVIDRIVE modular axes.
- Pair it with an MDP90A or MDR90B supply module to power the DC link.
- Wire 24 V DC auxiliary supply to X5 (-10% / +20% tolerance).
- Connect the motor to U/V/W terminals (or X2 copper bars for larger sizes).
- Wire STO safety inputs per EN 61800-5-2 if you use the safety function.
- Plug in encoder, I/O, or safety option cards before applying power.
Commissioning & Maintenance
- Configure the axis via the system bus (EtherCAT/SBusPLUS) or SEW MOVITOOLS.
- Select the control mode (U/f, VFCplus, CFC, or ELSM) to match the motor and load.
- Enter motor nameplate data and run the auto-tune routine.
- Set ramp times, current limits, and encoder mapping to match your application.
- Enable energy-saving standby to cut idle consumption by up to 89%.
- Check DC link voltage and 24 V supply during first power-up.
- Keep the unit clean and verify terminal tightness annually.
Compatibility
- Works with asynchronous and synchronous motors, including servo applications.
- Requires a DC link supply module (MDP90A or MDR90B) — not a standalone drive.
- Integrates into MOVIDRIVE modular multi-axis systems over the backplane.
- Adds encoder feedback and extra I/O via CES11A, CID21A, or CIO21A option cards.
- STO is integrated (S00); add a CS..A safety card for extended safety functions.
- Legacy platform: pairs with existing MOVIDRIVE modular installed base, not with MOVI-C® hardware.
Certifications & Standards
- Safety: integrated STO per EN 61800-5-2 (S00 variant).
- Protection: IP20 per EN 60529.
- Environmental: non-condensing, 0 to +45 °C operating range.
- Conformal coating available with /L option for harsh environments.
Package Contents
- 1× MDA90A-0320-503-X-S00 single-axis module with integrated STO
- Factory-installed safety electronics (S00 variant)
- Quick-start documentation
- Note: supply module (MDP90A/MDR90B), option cards, and cables sold separately
Frequently Asked Questions
- Q: Is this module a standalone drive?
A: No. It runs from a shared DC link. Pair it with an MDP90A or MDR90B supply module and 24 V DC auxiliary power. - Q: Does it include Safe Torque Off?
A: Yes. The S00 suffix means integrated STO per EN 61800-5-2, ready to wire out of the box. - Q: Is this product still current?
A: It is a legacy MOVIDRIVE modular part. SEW now promotes MOVI-C®, but this module remains available as a spare for installed systems. - Q: Which encoder options can I add?
A: Plug in CES11A for multi-encoder, CID21A for encoder interface, or CIO21A for extra I/O. Fit them before power-up. - Q: Can it run a synchronous servo motor?
A: Yes. CFC and ELSM modes support high-dynamic servo control up to 500 Hz output frequency. - Q: The drive shows a DC link undervoltage fault. What should I check?
A: Verify the supply module output, check DC link fuses, and confirm the 24 V auxiliary supply at X5 is within tolerance. - Q: Can I wall-mount it without a cabinet?
A: No. IP20 rating requires cabinet mounting. Protect it from dust, moisture, and dripping water. - Q: What does the /L option mean?
A: /L means conformal coated PCB. Choose it for humid, dusty, or chemically aggressive environments.















There are no reviews yet.