Product details
Product Description
The MDA90A-0120-503-X-S00 is a single-axis inverter from SEW-EURODRIVE. It belongs to the MOVIDRIVE® modular platform and runs one motor from a shared DC link. Rated output is 12 A. The S00 suffix adds integrated Safe Torque Off (STO) per EN 61800-5-2. Electrical data matches the base model MDA90A-0120-503-X-000. A typical asynchronous motor load is 5.5 kW. SEW DriveConfigurator still lists full product data.
Order Code Breakdown
- MDA90A-0120-503-X-S00 — full order code
- MDA90A — MOVIDRIVE® modular single-axis inverter, DC-link powered
- 0120 — 12 A rated output current (performance class)
- 503 — device variant code; base electrical parameters apply
- X — standard factory configuration code
- S00 — integrated STO safety variant (000 = no integrated safety)
- X — standard factory configuration code
- 503 — device variant code; base electrical parameters apply
- 0120 — 12 A rated output current (performance class)
Technical Specifications
- Identity
- Brand: SEW-EURODRIVE
- Model: MDA90A-0120-503-X-S00
- Series: MOVIDRIVE® modular single-axis module
- Type: single-axis inverter module (DC link powered)
- Electrical Data
- DC link voltage: 750–800 V DC (380–400 V line → 750 V; 480–500 V → 800 V)
- Rated output current: 12 A
- Overload: 250 % of rated current for max. 1 s
- Output frequency: U/f 599 Hz · VFCplus 250 Hz · CFC 500 Hz · ELSM 500 Hz (max.)
- Auxiliary supply: DC 24 V (−10 % / +20 %)
- Standby power: 4.3 W; energy-saving standby cuts use up to 89 %
- Typical motor power: 5.5 kW asynchronous (ASM)
- Safety
- Integrated STO per EN 61800-5-2 (S00 variant)
- Communication & Options
- System bus via backplane (X30): EtherCAT / SBusPLUS
- Option cards: /CES11A (multi-encoder), /CID21A (encoder), /CIO21A (I/O), /CS..A (safety), /L (conformal coating)
- Terminals
- Motor U/V/W (sizes 1–2 terminals; sizes 3–5 X2 copper bars)
- 24 V aux: X5; encoder supply peak 1000 mA: X15
- Environmental
- Operating temp: 0 to +45 °C (no derating)
- Storage temp: −25 to +70 °C (non-condensing)
- Protection: IP20 — cabinet installation required
- Mechanical
- Base plate width 60 mm; depth 355 mm (full dimensions per size drawing)
- Lifecycle
- Legacy MOVIDRIVE® modular platform; successor is MOVI-C® (data verified 2026-09)
Key Benefits at a Glance
- One compact axis module drives a full 5.5 kW motor with 250 % peak current for hard starts.
- Built-in STO removes the external safety contactor and cuts wiring time.
- A shared DC link lets multiple axes exchange braking energy and saves cabinet space.
- Plug-in option cards add encoders, I/O, safety and fieldbus as the machine evolves.
- Energy-saving standby slashes idle power by up to 89 %.
Installation Guide
- Mount vertically on a panel or backplane inside an IP20 control cabinet.
- Leave clear top and bottom air gaps; do not exceed 45 °C ambient without derating.
- Feed the DC link from an MDP90A or MDR90B supply module.
- Connect motor cables to U/V/W and 24 V aux to X5.
- Wire the encoder to X15 and the system bus through the backplane (X30).
- Route motor cables separately from signal cables to reduce interference.
- Connect STO signals to a safety controller before enabling the axis.
- Tighten terminals to the torque shown in the dimension drawing.
Commissioning & Maintenance
- Set up and tune with SEW DriveConfigurator or MOVITOOLS® Studio.
- Run motor auto-tuning; save the parameter set for cloning to spare units.
- Front diagnostic LEDs show state and fault codes at a glance.
- Modular design lets you swap one axis without removing neighboring modules.
- Option cards plug in from the front; no rewire of power circuits.
- Check firmware in the tool; update only with SEW-approved files.
Compatibility
- Pairs with MOVIDRIVE® modular supply modules MDP90A and MDR90B.
- Shares one DC link bus with other MDA90A axis modules in the same cabinet.
- Accepts /CES11A, /CID21A, /CIO21A, /CS..A and /L option cards.
- Speaks EtherCAT and SBusPLUS over the backplane system bus.
- Not drop-in compatible with MOVI-C®; use MOVI-C® for new designs.
Certifications
- STO safety function certified to EN 61800-5-2 (S00 variant).
- CE marked for the European market; request UL/cUL or marine certificates from the datasheet.
- Conformal-coated PCB available via /L option for harsh environments.
Package Contents
- 1 × MDA90A-0120-503-X-S00 single-axis inverter module
- Mounting screws supplied by SEW-EURODRIVE
- Quick-start guide and safety notes (digital via QR code)
- Factory-default parameters load on the unit before shipping
Frequently Asked Questions
- Q: Does the S00 version still need an external safety relay?
- A: No. Safe Torque Off is built in. Wire the safety controller directly to the STO inputs.
- Q: Can I swap a 000 unit for this S00 module?
- A: Yes. Electrical ratings stay identical; only the integrated safety function differs. Map STO in your circuit.
- Q: Which supply module feeds this axis?
- A: Use an MDP90A or MDR90B supply module to create the shared DC link.
- Q: What motor size fits a 12 A output?
- A: A 5.5 kW asynchronous motor is typical. Confirm with the MOVIDRIVE motor assignment table.
- Q: How long can it deliver 250 % current?
- A: Up to one second, then it returns to the 12 A rated level.
- Q: Can I add fieldbus or encoders later?
- A: Yes. Plug in /CES11A, /CID21A, /CIO21A or /CS..A cards as needed.
- Q: [Field experience] The unit faults immediately on power-up — where do I start?
- A: Check 24 V aux at X5 and DC-link voltage. The STO inputs must close before the drive enables.
- Q: [Field experience] Should I keep this as a spare?
- A: The platform is legacy. Stock critical spares on site; specify MOVI-C® for new machines.
- Q: [Field experience] Why does the motor overheat in summer?
- A: Cabinet air above 45 °C forces derating. Add cooling or size up the drive.
- MDA90A — MOVIDRIVE® modular single-axis inverter, DC-link powered

















There are no reviews yet.