Product details
Product Overview
- The MC07B 0022-2B1-4-00 is a bookshelf-format cabinet inverter from SEW-EURODRIVE.
- It belongs to the MOVITRAC® B Standard family, size 0L.
- It takes single-phase 200–240 V mains and outputs three-phase voltage to the motor.
- Rated at 2.2 kW and 8.6 A, it fits conveyors, fans, pumps, and small machinery.
- Two control modes are available: U/f for simple loads and VFC sensorless vector for dynamic torque.
- CANopen is built in. Add a DFE or FSE gateway for PROFINET, EtherNet/IP, EtherCAT, or PROFIBUS.
- An integrated 4Q brake chopper handles regenerative energy out of the box.
- Cold-plate technology and forced-air cooling keep the unit compact and reliable.
Technical Specifications
- Brand: SEW-EURODRIVE
- Model: MC07B 0022-2B1-4-00
- Part number: 828 498 9
- Series: MOVITRAC® B Standard Inverter, size 0L
- Model code structure:
- MC07B → MOVITRAC® B series
- 0022 → 2.2 kW rated power
- 2B1 → single-phase 200–240 V supply code
- 4 → size / option code (size 0L)
- 00 → standard configuration
- Electrical ratings:
- Supply voltage: 1×AC 200–240 V, 50/60 Hz ±5%
- Rated power: 2.2 kW
- Rated output current: 8.6 A
- Output voltage: 3×0 – Vline
- Overload capacity: 125% IN continuous; 150% IN for min 60 s
- Maximum output frequency: 599 Hz
- DC bus voltage: max 485 V DC permitted
- Integrated brake chopper: 4Q, min braking resistance 27 Ω
- Power loss: 105 W at 100% rated load
- Integrated EMC filter: yes
- Control and I/O:
- Control modes: U/f, VFC (sensorless vector)
- Digital inputs: 6 programmable
- Digital outputs: 2 programmable
- Relay output: 1
- Analog setpoint input: 1
- Signal terminals: removable
- Communication:
- Built-in: CANopen
- SBus/RS485: via FSC11B / FSC12B
- PROFINET IO: via DFE32B
- Modbus TCP / EtherNet/IP: via DFE33B
- EtherCAT: via DFE24B or FSE24B
- PROFIBUS DPV1: via DFP21B
- DeviceNet: via DFD11B
- PROFIsafe: via DFS11B (PROFIBUS) or DFS21B (PROFINET)
- Environmental ratings:
- Operating temperature: -10 to +50 °C (derate 2.5% IN/K from 40–50 °C, 3% IN/K from 50–60 °C)
- Storage temperature: -25 to +75 °C
- Climate class: EN 60721-3-3 class 3K3
- Protection rating: IP20
- Physical data:
- Dimensions (H×W×D): 273.5 × 80 × 163.5 mm
- Weight: 2.2 kg
- Cooling: forced air, cold-plate technology
Installation Guide
- Mount the unit inside a control cabinet on a flat vertical panel.
- Keep clear space above and below for forced-air cooling.
- Wire single-phase mains to the input terminals and the motor to the output.
- Use removable signal terminals for fast wiring and servicing.
- Connect a braking resistor (min 27 Ω) if your load decelerates often.
- Plug in the chosen DFE/FSE communication gateway before power-up.
- Tighten all terminals to the torque values in the manual.
Commissioning & Maintenance
- Set motor nameplate data and control mode (U/f or VFC) via keypad or fieldbus.
- Run the motor auto-tune routine when using VFC mode.
- Map the 6 digital inputs, 2 digital outputs, relay, and analog input to your process.
- Set ramp times and current limits to match the application.
- Check the cooling fan periodically and replace it if noise or speed drops.
- Keep the cold plate and air passages clean and unobstructed.
- Verify terminal tightness during annual maintenance.
Compatibility
- Drives standard three-phase asynchronous motors from single-phase mains.
- Works with CANopen masters out of the box.
- Adds PROFINET, EtherNet/IP, EtherCAT, PROFIBUS, or DeviceNet via gateway modules.
- Supports PROFIsafe via DFS11B or DFS21B safety gateway.
- Note: STO is not supported on single-phase 230 V units. Choose a 3-phase MOVITRAC B model if STO is required.
Certifications & Standards
- EMC: integrated filter, compliant with drive EMC standards.
- Protection: IP20 per EN 60529.
- Climate: EN 60721-3-3 class 3K3.
- Safety: STO not available on this variant; PROFIsafe via external gateway only.
Package Contents
- 1× MC07B 0022-2B1-4-00 inverter, size 0L
- Integrated CANopen, EMC filter, and brake chopper (factory installed)
- Removable signal terminals
- Quick-start documentation
- Note: communication gateways (DFE/FSE/DFP/DFD), safety modules, and keypad sold separately
Frequently Asked Questions
- Q: Can this drive run a 3-phase motor from single-phase mains?
A: Yes. It takes 1×200–240 V input and outputs 3-phase voltage up to mains level. - Q: Does it support Safe Torque Off (STO)?
A: No. Single-phase 230 V MOVITRAC B units do not support STO. Choose a 3-phase model if safety is required. - Q: Which fieldbus is built in?
A: CANopen comes integrated. Add DFE32B for PROFINET, DFE33B for Modbus TCP/EtherNet/IP, or DFE24B for EtherCAT. - Q: What is the difference between U/f and VFC mode?
A: U/f suits simple loads like fans and pumps. VFC sensorless vector gives faster torque response for conveyors and mixers. - Q: The drive trips on overload at start. What should I check?
A: Increase acceleration time, verify motor nameplate data, and check for mechanical binding in the load. - Q: Does it need a braking resistor?
A: Only for high-inertia or frequent deceleration. The minimum allowed resistor value is 27 Ω. - Q: Can I wall-mount it without a cabinet?
A: No. IP20 rating requires cabinet mounting. Protect it from dust, moisture, and dripping water. - Q: Can multiple drives share one fieldbus gateway?
A: Yes. Use the appropriate DFE or FSE gateway and give each drive a unique node address on the bus.

















There are no reviews yet.