Product details
Product Overview
- Product Model: FCST2020
- Product Brand: Fujikin
- Product Series: FCST T2000 Series (FCS-T2000 Piezo Actuator)
- Module Type: Piezo-actuated diaphragm flow controller for high-reactivity and low-stability gases.
- Core Function: Accurate gas flow control with fast response and low particle generation.
- Full-Scale Flow Range: 6 – 20 SLM (N2 equivalent).
- Accuracy: ±1% S.P. (25-100% of set point), ±0.25% FS (2-25%).
- Repeatability: ±0.2% FS.
- Response Time: ≤1 sec.
- Gas Compatibility: O3, halogen and reactive process gases; N2, Ar, He, H2 and semiconductor gases.
- Micro-Flow Option: Special 1-3 SCCM version available.
- Typical Applications: O3 gas delivery; CVD/etch with highly reactive gases; semiconductor processes with corrosive or oxidizing gases; flat panel display; solar panel manufacturing.
- Key Features: Piezo-actuated diaphragm valve for high-reactivity gases including O3; low-temperature thermal sensor for wide stability; minimum particle generation; RS-485 digital standard; ±1% S.P. accuracy.
Technical Data
- Brand: Fujikin
- Model: FCST2020
- Series: FCST T2000 Series
- Measurement Range: 6 – 20 SLM (N2 equivalent); 1-3 SCCM micro-flow option.
- Frequency Response: Response time ≤1 sec.
- Sensitivity: ±1% S.P. (25-100% of set point), ±0.25% FS (2-25%).
- Linearity: ±1% S.P. accuracy across the control range.
- Resolution: Control range 2-100% FS; turndown 2-100% FS.
- Temperature Range: Operating temperature 5-50°C.
- Environmental Durability: Proof pressure 1 MPaG; external leak ≤1×10⁻¹¹ Pa·m³/s He.
- Anti-Interference: Analog 0-5 VDC with ±15 VDC supply; digital RS-485 and DeviceNet interfaces.
- Operating Pressure: Max operating pressure 300 kPaG.
- Required Differential Pressure:
- N/O: 50-300 kPa (6-10 SLM); 100-300 kPa (11-20 SLM).
- N/C: 100-300 kPa (6-10 SLM); 200-300 kPa (11-20 SLM).
- Wetted Materials: SUS316L stainless steel, PCTFE.
- Seals: Metal seal (Au gold gasket).
- Valve Type: Piezo actuator (diaphragm valve, N/O or N/C).
- Heated Option: No (standard unheated version).
- Dimensions: 131 (H) × 124 (W) × 71 (D) mm.
- Power Supply: ±15 VDC; +15 VDC approx. 100 mA, -15 VDC approx. 50 mA.
- Electrical Interface: Analog 0-5 VDC (±15 VDC supply); Digital RS-485, DeviceNet.
Installation Guide
- Mounting: Install in a clean, dry location within 5-50°C.
- Pressure Setup: Confirm differential pressure meets N/O or N/C requirements.
- Piping: Use SUS316L-compatible fittings and keep lines free of particles.
- Electrical Connection: Connect ±15 VDC supply and analog or digital signal lines.
- Gas Supply: Verify gas type compatibility before pressurizing the line.
- Leak Check: Perform a helium leak check after installation.
Setup and Maintenance
- Zero Adjustment: Calibrate at 2-25% FS for best accuracy.
- Set Point Check: Verify ±1% S.P. accuracy at 25-100% of set point.
- Response Check: Confirm response time stays within 1 sec.
- Routine Inspection: Check seals and wetted parts for wear or corrosion.
- Cleaning: Use compatible agents only; avoid damaging the Au gold gasket.
- Particle Control: Keep the valve clean to maintain minimum particle generation.
Compatibility Notes
- Gas Types: Best for O3, halogen, reactive process gases, N2, Ar, He, H2 and semiconductor gases.
- Control Systems: Works with analog 0-5 VDC, RS-485 and DeviceNet networks.
- Materials: SUS316L stainless steel and PCTFE suit corrosive and oxidizing gases.
- Micro-Flow: Select the 1-3 SCCM option for low-flow semiconductor processes.
- Heated Version: Standard unit is unheated; confirm process temperature needs first.
Certification and Compliance
- RoHS: Compliant.
- CE: Certified.
- Surface Finish: EP surface finish available.
- Leak Integrity: ≤1×10⁻¹¹ Pa·m³/s He (external leak).
Packing List
- FCST2020 flow controller unit.
- Installation and operation manual.
- Calibration certificate.
- Electrical connector kit.
- Protective shipping packaging.
FAQ
- Q: Which gases does this controller handle?
- A: It suits O3, halogen, reactive process gases, N2, Ar, He, H2 and semiconductor gases.
- Q: What flow range does the standard unit cover?
- A: The standard range is 6-20 SLM (N2 equivalent).
- Q: How fast does it respond to a set point change?
- A: Response time is 1 second or less.
- Q: Does it need a heated version for O3 service?
- A: The standard unit is unheated. Check your process conditions before use.
- Q: What interfaces does it support?
- A: Analog 0-5 VDC, RS-485 and DeviceNet.
- Q: How often should I check the seals?
- A: Inspect seals at each scheduled maintenance interval or after gas exposure changes.
- Q: What differential pressure is needed?
- A: N/O needs 50-300 kPa at 6-10 SLM; N/C needs 100-300 kPa at 6-10 SLM.
- Q: Can I use it for micro-flow dosing?
- A: Yes. A special 1-3 SCCM option is available.
- Q: What should I check if accuracy drifts?
- A: Recheck the zero point, supply voltage and seal condition first.
- Q: Is the unit RoHS and CE marked?
- A: Yes. It is RoHS compliant and CE certified.
















There are no reviews yet.