Over 50,000 hot-selling automation module components.

FCST1050ZF Fujikin MFC | MGMR | 30–50 SLM | Hastelloy Sensor

0 Reviews
In stock
  • 100% genuine products in stock with fast delivery.
  • 30-day return policy for quality assurance.
  • 12-month warranty for peace of mind.
SKU: FCST1050ZF
Brands:

Product details

Product Introduction

FCST1050ZF Fujikin Mass Flow Controller brings multi-gas, multi-range flexibility to semiconductor gas delivery. It belongs to the FCST T1000 Series (FCS-T1000Z MGMR). The MGMR design lets you switch gas type and full-scale flow on site. You change settings through configuration software. That cuts spare inventory and shortens changeover time.

Model FCST1050ZF covers the 30,001 to 50,000 SCCM range (N2 equivalent, Bin 8). It holds ±1% S.P. accuracy from 25% to 100% of set point. Low-end accuracy is ±0.25% FS from 2% to 25%. Repeatability reaches ±0.2% FS. Response time stays at or under 1 second. These traits suit fast, repeatable process steps in CVD, PVD, etching, and diffusion.

Fujikin builds this unit with SUS316L stainless steel, a Hastelloy C sensor, and PCTFE seats. The Hastelloy sensor resists halogens and aggressive gases. A bellows-sealed diaphragm valve comes in N/O or N/C form. Metal seal versions reach ≤1×10⁻¹¹ Pa·m³/s He leak integrity. The unit supports up to 8 gas and flow tables from 10 SCCM to 50 SLM.

Key Features

  • MGMR design lets you change gas and full-scale flow on site
  • Up to 8 gas and flow tables from 10 SCCM to 50 SLM
  • Hastelloy C sensor for strong halogen resistance
  • ±1% S.P. accuracy across 25–100% of set point
  • Response time at or under 1 second for fast process steps
  • Smaller spare parts stock thanks to multi-gas flexibility

Technical Specifications

  • Brand: Fujikin
  • Model: FCST1050ZF
  • Series: FCST T1000 Series (FCS-T1000Z MGMR)
  • Full-Scale Flow Range: 30,001 to 50,000 SCCM (N2 equivalent, Bin 8)
  • Accuracy: ±1% S.P. (25–100% of set point); ±0.25% FS (2–25%); guaranteed at 15–35°C
  • Repeatability: ±0.2% FS
  • Response Time: At or under 1 second
  • Gas Type: Multi-gas, multi-range; up to 8 gas and flow tables from 10 SCCM to 50 SLM; N2, Ar, He, H2, O2, SiH4, CH4, SF6, Cl2, NH3 and other process gases
  • Operating Pressure: Max 400 kPaG (Ar: 500 kPaG); required differential pressure 50–300 kPa
  • Wetted Materials: SUS316L stainless steel, Hastelloy C sensor, PCTFE seats
  • Seals: Metal seal (M) or rubber (FKM); order code sets seal type
  • Electrical Interface: Analog 0–5 VDC (±15 VDC or +24 VDC); 4–20 mA (+24 VDC); digital RS-485, DeviceNet, EtherCAT (metal seal only)
  • Heated Option: No, standard unheated version
  • Operating Temperature: 5°C to 50°C
  • Control Range / Turndown: 2% to 100% FS
  • Dimensions: 125 H × 124 W × 77 D mm
  • Power Supply: ±15 VDC (0–5 VDC analog); +24 VDC (0–5 VDC or 4–20 mA)
  • Valve Type: Bellows-sealed diaphragm valve, N/O or N/C
  • Leak Integrity: ≤1×10⁻¹¹ Pa·m³/s He (metal seal); ≤1×10⁻⁷ Pa·m³/s He (rubber seal)
  • Compliance/Certification: RoHS compliant; CE; EP surface finish (metal type)

Installation Guide

  • Mount the unit in line with the gas flow direction
  • Keep line pressure at or below 400 kPaG (Ar: 500 kPaG)
  • Provide differential pressure between 50 and 300 kPa
  • Pick the seal type by order code before install
  • Wire the interface for analog, 4–20 mA, or digital control
  • Hold ambient temperature between 5°C and 50°C
  • Load your gas and flow tables with the configuration software

Commissioning and Maintenance

  • On-site gas and range changes cut swap-out time
  • Configuration software makes table updates quick
  • Hastelloy C sensor resists corrosion for longer service life
  • Metal seal version supports tighter leak control
  • Fewer spare units needed thanks to MGMR flexibility
  • EP surface finish supports clean process lines

Compatibility Notes

  • Multi-gas support covers N2, Ar, He, H2, O2, SiH4, CH4, SF6, Cl2, NH3, and more
  • Analog 0–5 VDC works with common control racks
  • 4–20 mA option fits legacy current-loop systems
  • Digital RS-485, DeviceNet, EtherCAT support network control (metal seal only)
  • Up to 8 stored tables let one unit serve several recipes

Certification Information

  • RoHS compliant for restricted substance control
  • CE marked for applicable regulatory requirements
  • EP surface finish on metal type for clean gas paths
  • Leak integrity at ≤1×10⁻¹¹ Pa·m³/s He (metal seal)

Packaging List

  • 1x Fujikin FCST1050ZF Mass Flow Controller
  • Electrical connector as specified
  • Configuration software access for gas and flow tables
  • Documentation for installation and operation
  • Protective packaging for safe transport

FAQ

Q: Can I change the gas type after installation?

A: Yes. The MGMR design lets you switch gas and full-scale flow on site. You use configuration software for the update.

Q: How many gas tables can the unit store?

A: It holds up to 8 gas and flow tables. They span 10 SCCM to 50 SLM.

Q: What accuracy should I expect at low flow?

A: From 2% to 25% of set point, accuracy is ±0.25% FS. From 25% to 100%, it is ±1% S.P.

Q: Which gases does it support?

A: It handles N2, Ar, He, H2, O2, SiH4, CH4, SF6, Cl2, NH3, and other process gases.

Q: How fast does it respond?

A: Response time is at or under 1 second. That supports quick recipe steps.

Q: What differential pressure does it need?

A: Keep required DP between 50 and 300 kPa. Max operating pressure is 400 kPaG, or 500 kPaG for Ar.

Q: Does the sensor resist corrosive gases?

A: Yes. The Hastelloy C sensor handles halogens and aggressive gases well.

Q: What seal types are available?

A: You can order metal seal (M) or rubber seal (FKM). The order code sets the type.

Q: Which digital interfaces does it offer?

A: RS-485, DeviceNet, and EtherCAT. Digital options apply to the metal seal version only.

Q: How tight is the leak rating?

A: Metal seal reaches ≤1×10⁻¹¹ Pa·m³/s He. Rubber seal reaches ≤1×10⁻⁷ Pa·m³/s He.

Specifications

  • BrandAllen-Bradley
  • Part Number22A-B012F104
  • ConditionOriginal Brand New

Customers Reviews

There are no reviews yet.

Be the first to review “FCST1050ZF Fujikin MFC | MGMR | 30–50 SLM | Hastelloy Sensor”

Your email address will not be published. Required fields are marked *

Back to Top
Product has been added to your cart