Product details
FCST1030L Analog Economy Mass Flow Controller by Fujikin
The FCST1030L is a low-cost analog mass flow controller from the FCST T1000 Series by Fujikin. It drives simple analog systems with a ±15 VDC supply and a 0-5 VDC signal. The small body saves space in gas cabinets and tools. A bellows-sealed diaphragm valve keeps the gas path clean. This unit suits high-volume semiconductor lines that need a stable, budget-friendly part.
- Brand: Fujikin
- Model: FCST1030L
- Series: FCST T1000 Series (FCS-T1000L Analog Economy)
- Module Type: Analog mass flow controller
- Best For: CVD, PVD, etching, diffusion, and gas cabinet lines
Technical Data
- Full-Scale Flow Range: 6 to 30 SLM (N2 equivalent)
- Ranges up to 50 SLM also supported
- Control Range: 2-100% FS
- Accuracy: ±1% FS (10 SCCM-30 SLM)
- ±2% FS (31-50 SLM)
- Guaranteed from 15-35°C
- Repeatability: ±0.2% FS
- Response Time: ≤1 sec (10 SCCM-30 SLM)
- ≤2 sec (31-50 SLM)
- Linearity: Included in accuracy spec
- Hysteresis: Included in accuracy spec
- Gas Type: Customer-specified process gas
- Supports N2, Ar, He, H2, O2, and common semiconductor gases
- Operating Pressure: Max 400 kPaG
- Required differential pressure 50-300 kPa
- Operating Temperature: 5-50°C
- Heated Option: No; standard unheated version
- Wetted Materials: SUS316L stainless steel, PCTFE seats
- Seals: Rubber (FKM) standard
- Metal seal option available
- Valve Type: Bellows-sealed diaphragm valve
- Normally open or normally closed
- Electrical Interface: Analog 0-5 VDC only
- Power Supply: ±15 VDC
- Dimensions: 125 (H) × 124 (W) × 77 (D) mm
- Leak Integrity: ≤1×10⁻⁷ Pa·m³/s He (rubber seal)
- ≤1×10⁻¹¹ Pa·m³/s He (metal seal option)
Installation Guide
- Mount the FCST1030L in a clean gas line.
- Keep line pressure at or below 400 kPaG.
- Set differential pressure between 50 and 300 kPa.
- Use the 125 × 124 × 77 mm body size to plan space.
- Feed ±15 VDC power to the unit.
- Route the 0-5 VDC signal to your analog controller.
- Purge the line before first use.
Setup and Maintenance
- Set flow with the 0-5 VDC command signal.
- Keep ambient within 5-50°C for best accuracy.
- Match the process gas to the factory calibration.
- The bellows diaphragm cuts wear on the valve.
- Few parts mean low upkeep in high-volume lines.
- Check leak tightness after seal changes.
Compatibility Notes
- Works with analog 0-5 VDC control systems only.
- Fits standard semiconductor gas cabinets and tools.
- Supports common process gases like N2, Ar, He, H2, and O2.
- Rubber and metal seal options fit different purity needs.
- Compact body drops into tight tool spaces.
Certification
- CE compliant
- RoHS compliant
- Metal seal option supports high-purity leak integrity
What Is in the Box
- One Fujikin FCST1030L mass flow controller
- One quick start guide
- One calibration certificate
FAQ
- Q: Does the FCST1030L support digital fieldbus?
- A: No. It offers analog 0-5 VDC only.
- Q: Which power supply does it need?
- A: A ±15 VDC supply.
- Q: Can I order a metal seal version?
- A: Yes. The metal seal option tightens leak integrity.
- Q: What differential pressure does it need?
- A: Keep it between 50 and 300 kPa.
- Q: Is a heated version available?
- A: No. This is a standard unheated unit.
- Q: In our fab, what most often hurts accuracy?
- A: Room heat outside 15-35°C. Keep the tool area cool.
- Q: From field use, how do teams cut drift on analog lines?
- A: Hold supply pressure steady. Purge dry gas. Recheck zero at each service.















There are no reviews yet.