E84AVTCE5524SB0 Lenze 8400 TopLine C 5.5 kW STO Inverter

Product Overview

• Model E84AVTCE5524SB0 is a Lenze 8400 TopLine C built-in frequency inverter.
• It drives 5.50 kW 4-pole asynchronous motors at 400 V.
• It supports servo-type dynamic motion with fast torque response.
• Integrated STO safety torque off saves panel space and wiring.
• Safety is certified to EN ISO 13849-1 Cat. 4 PL e and SIL 3.
• Built-in CANopen (DS301) handles fast machine communication.
• One MCI slot accepts PROFIBUS, PROFINET or EtherCAT modules.
• This unit fits compact cabinets and high-cycle servo applications.

Technical Specifications

• Brand: Lenze
• Model: E84AVTCE5524SB0
• Series: Inverter Drives 8400 TopLine C
• Module type: Built-in frequency inverter
• Rated motor power: 5.50 kW (4-pole asynchronous motor)
• Output current: 13.0 A nominal at default setting
• Overload: 150% for 60 s; 200% for 3 s
• Mains voltage: 3/PE AC 320 V to 550 V, 45 Hz to 65 Hz
• DC supply: 455 V to 775 V DC
• Rated power loss: 275 W at rated output current
• Communication ports: CANopen (DS301-compliant, T plug)
• Expansion: MCI slot for one communication module (E84AYC…)
• Integrated safety: STO, Cat. 4 PL e, SIL 3
• Operating temperature: -10 °C to +55 °C (3K3, EN 60721-3-3)
• Storage temperature: -25 °C to +60 °C (1K3, EN 60721-3-1)
• Humidity: Non-condensing; no specific %RH published
• Protection rating: IP20 (EN 60529), NEMA Type 1
• Dimensions (H×W×D): 270 mm × 140 mm × 234 mm
• Weight: 6.1 kg without communication module
• Lifecycle: Mature; active in the Lenze portfolio as of 2026-10
• Audit status: OFFICIAL_VERIFIED

Expert Review

• This drive suits machine builders who need fast servo motion in a small cabinet.
• The 5.50 kW rating matches common 400 V asynchronous motors.
• 200% for 3 s handles high starting torque and shock loads.
• Built-in STO removes extra safety relays and saves wiring time.
• CANopen is ready for motion control out of the box.
• The MCI slot lets you switch to PROFINET or EtherCAT later.
• IP20 and NEMA Type 1 fit standard industrial enclosures.
• The wide 320 V to 550 V mains range tolerates grid variation.
• It is a mature, verified product with stable spare-part supply.

Manager’s Insight

• Stock this unit for servo upgrade projects in packaging and handling lines.
• Buyers often pair it with a PROFINET module for new machines.
• Its STO safety shortens machine certification work.
• The unit ships in 12-24 hours via FedEx, UPS or DHL.
• For volume orders, contact sales@powergearx.com.
• For fast quotes, message +86 18030005825 on WhatsApp.

Best Fit Equipment and Applications

• Packaging machines with fast repeat cycles.
• Material handling conveyors and transfer units.
• Textile and printing lines needing speed control.
• Woodworking feed and spindle drives.
• Machine tools with auxiliary servo axes.
• Pumps and fans with variable speed demand.
• Automated assembly cells with CANopen control.

Installation Guide

• Mount the unit vertically inside an IP20 cabinet.
• Keep clearance for airflow above and below the heat sink.
• Connect mains to 3/PE AC 320 V to 550 V.
• Use the DC supply terminals for 455 V to 775 V DC.
• Wire the motor to the 13.0 A output terminals.
• Connect the STO terminals to your safety circuit.
• Plug CANopen into the built-in T plug.
• Fit one MCI communication module if needed.
• Tighten power terminals to the torque in the manual.
• Check PE grounding before power-on.

Commissioning and Maintenance

• Set motor data with the Lenze keypad or Engineer software.
• Run the auto-tuning routine for the motor.
• Set overload limits to 150% for 60 s and 200% for 3 s.
• Test the STO function before production starts.
• Check the heat sink for dust every three months.
• Verify fan operation at each service visit.
• Keep cabinet temperature below +55 °C.
• Store spare units between -25 °C and +60 °C.
• Replace worn fans early to avoid thermal trips.

Compatibility Notes

• Works with 400 V 4-pole asynchronous motors up to 5.50 kW.
• Accepts E84AYC… MCI modules for PROFIBUS, PROFINET or EtherCAT.
• Speaks CANopen DS301 with other CANopen devices.
• Fits the 8400 TopLine C accessory family.
• Uses standard Lenze 8400 parameter tools.
• Not a direct swap for other 8400 frame sizes; check dimensions.

Certifications

• STO: EN ISO 13849-1 Cat. 4 PL e
• Functional safety: EN 61508 / EN 62061 SIL 3
• Protection: IP20 (EN 60529), NEMA Type 1
• Climate: 3K3 (EN 60721-3-3) and 1K3 (EN 60721-3-1)

Packing List

• 1 × Lenze E84AVTCE5524SB0 inverter
• 1 × safety engineering version with 20 mm extra depth
• 1 × printed quick start guide
• Communication module sold separately
• Weight: 6.1 kg without module

Warranty and Shipping

• 12-month warranty on the unit.
• Ships in 12-24 hours after order confirmation.
• Courier options: FedEx, UPS, DHL.
• Tracking number sent at dispatch.
• Questions: sales@powergearx.com
• WhatsApp: +86 18030005825

FAQ

• Q: Can this unit run a 5.5 kW standard motor?
• A: Yes. It is rated for 5.50 kW 4-pole asynchronous motors at 400 V.
• Q: Does it include a PROFINET port?
• A: No. It has CANopen built in. Add an E84AYC… module for PROFINET.
• Q: Is the safety function already inside?
• A: Yes. STO is integrated and certified to Cat. 4 PL e and SIL 3.
• Q: What is the overload capacity?
• A: 150% for 60 s and 200% for 3 s of rated output current.
• Q: Can I use it in a small cabinet?
• A: Yes. The unit measures 270 × 140 × 234 mm and weighs 6.1 kg.
• Q: What temperature range is allowed?
• A: -10 °C to +55 °C in operation and -25 °C to +60 °C in storage.
• Q: How fast do you ship?
• A: We dispatch in 12-24 hours by FedEx, UPS or DHL.
• Q: Is a communication module in the box?
• A: No. The MCI module is sold separately.

Buying Guide

• Check your motor power first. Stay at or below 5.50 kW.
• Confirm mains is within 320 V to 550 V AC.
• List your network type before ordering an MCI module.
• Plan STO wiring into the safety circuit early.
• Measure cabinet depth; the safety version adds 20 mm.
• Keep one spare unit for critical lines.
• Order before noon for same-day dispatch.
• Ask us for a bundle quote with the communication module.

Copyright © 2026 Powergear X Automation Limited. All rights reserved.

Original Source: https://www.powergearx.com/