E84AVSCE7514SXO Lenze 8400 StateLine C Inverter Drive 0.75 kW CANopen

E84AVSCE7514SXO Lenze 8400 StateLine C Inverter Drive – 0.75 kW

E84AVSCE7514SXO is a compact built-in frequency inverter from the Lenze 8400 StateLine C series. It controls 0.75 kW 4-pole asynchronous motors at 400 V. The unit suits controlled drives with or without speed feedback. It ships with CANopen on board and one MCI slot for fieldbus expansion.

Note on model code: the canonical order code is E84AVSCE7514SXO. The input string E84AVSCE75145XO comes from OCR misreads. All data below follows the official Lenze 8400 Inverter Drives catalogue.

Technical Data

• Brand: Lenze
• Model: E84AVSCE7514SXO
• Series: Inverter Drives 8400 StateLine C
• Module type: Built-in frequency inverter
• Rated motor power: 0.75 kW, 4-pole asynchronous motor
• Output current: 2.40 A nominal at default setting
• Overload: 150 % for 60 s; 200 % for 3 s
• Mains voltage: 3/PE AC 320 V to 550 V, 45 Hz to 65 Hz
• DC supply: 455 V to 775 V DC
• Rated power loss: 80 W at rated output current
• Operating temperature: -10 °C to +55 °C (3K3, EN 60721-3-3)
• Storage temperature: -25 °C to +60 °C (1K3, EN 60721-3-1)
• Humidity: Non-condensing; no specific %RH published
• Protection rating: IP20 (EN 60529), NEMA Type 1
• Dimensions (H×W×D): 215 mm × 70 mm × 199 mm
• Weight: 1.8 kg without communication module
• Built-in port: CANopen (DS301-compliant, T plug)
• Protocol: CANopen
• Expansion: One MCI slot for PROFIBUS, PROFINET or EtherCAT module (order code E84AYC…)

Installation Guide

• Mount the built-in unit in a cabinet with sufficient air flow.
• Keep the IP20 rating in mind. Protect the drive from dust and moisture.
• Wire mains at 3/PE AC 320 V to 550 V. Check the 45 Hz to 65 Hz range.
• Use the DC input at 455 V to 775 V DC when a DC bus is available.
• Connect the motor for 0.75 kW at 400 V.
• Plug the CANopen T connector into the built-in port.
• Fit one MCI module only. Match the module to your fieldbus.
• Respect the 150 % for 60 s and 200 % for 3 s overload limits.
• Allow 80 W of heat loss in the cabinet thermal design.

Commissioning and Maintenance

• Set motor data before the first run. Match rated current to 2.40 A.
• Use CANopen DS301 objects for fast parameter access.
• Check fan and air paths at each service interval.
• Keep terminals tight. Vibration can loosen screws over time.
• The wide -10 °C to +55 °C range reduces seasonal downtime.
• Store spare units between -25 °C and +60 °C.

Compatibility

• Runs 0.75 kW 4-pole asynchronous motors at 400 V.
• Works with or without speed feedback.
• Fits Lenze 8400 StateLine C accessory modules.
• Accepts one E84AYC… communication module for PROFIBUS, PROFINET or EtherCAT.
• Speaks CANopen DS301 out of the box.

Certifications and Standards

• IP20 per EN 60529 and NEMA Type 1.
• Climate class 3K3 per EN 60721-3-3 for operation.
• Climate class 1K3 per EN 60721-3-1 for storage.
• CANopen DS301 compliance for the built-in port.

Packing List

• 1 × E84AVSCE7514SX0 inverter drive
• 1 × quick start guide
• Communication module sold separately

Warranty and Shipping

• 12-month warranty on the drive.
• Orders ship within 12 to 24 hours.
• Express carriers: FedEx, UPS and DHL.
• Need help? Email sales@powergearx.com or chat on +86 18030005825.

Expert Review

The 8400 StateLine C keeps things simple. One model covers 0.75 kW at 400 V with or without encoder. The CANopen port works on day one. The MCI slot lets you move to PROFIBUS, PROFINET or EtherCAT later. The 150 % overload for 60 s handles most start-up loads. Cabinet space stays small at 70 mm wide. For a mature, proven drive, this is a safe pick.

Manager’s Insight

Stock this unit for customers who run small 400 V motors. It covers conveyors, pumps and fans. The 12-month warranty and 12 to 24 hour dispatch keep lead times short. The 1.8 kg weight keeps freight low. Pair it with an E84AYC… module when the customer needs PROFINET or EtherCAT. Reach us at sales@powergearx.com for volume pricing.

Best Fit Devices and Applications

• Conveyor belts and transport lines
• Pumps and fans in building services
• Packaging and material handling machines
• Small machine tools with 0.75 kW motors
• Retrofit projects that need CANopen control

FAQ

Q: Is E84AVSCE75145XO the correct model code?

A: No. The correct code is E84AVSCE7514SX0. The other string comes from OCR errors. Both refer to the same 0.75 kW drive.

Q: Does this drive support PROFINET out of the box?

A: Not by default. You need one E84AYC… module in the MCI slot. CANopen works without any add-on.

Q: What overload can it handle?

A: It delivers 150 % of rated current for 60 s. It also delivers 200 % for 3 s.

Q: From experience, what is the most common install mistake?

A: Tight cabinet space. The unit is only 70 mm wide, but the 80 W heat loss needs airflow. Plan the cabinet early.

Q: How fast do orders ship?

A: We dispatch within 12 to 24 hours via FedEx, UPS or DHL.

Q: Can I run a motor without an encoder?

A: Yes. The drive supports controlled drives with or without speed feedback.

Buying Guide

• Check motor power first. This unit fits 0.75 kW at 400 V.
• Confirm your mains range. The drive takes 320 V to 550 V AC.
• Decide on fieldbus. Add one E84AYC… module only if you need PROFIBUS, PROFINET or EtherCAT.
• Check cabinet space and heat. Allow for 80 W loss.
• Ask us for a bundle quote at sales@powergearx.com or +86 18030005825.

Copyright © 2026 Powergear X Automation Limited. All rights reserved.

Original Source: https://www.powergearx.com/