EZAEBK1001 Lenze X400 Diagnosis Terminal RJ69 LCD Keypad

Product Overview

• EZAEBK1001 is a handheld keypad and diagnosis terminal from Lenze.
• It belongs to the X400 series for L-force drives.
• It plugs into the drive diagnostic interface X6 (RJ69).
• You can set parameters, read status, and trace errors.
• You can plug it in during operation.
• It suits 8400 motec, lonec, protec, and 9400 servo inverters.
• The LCD shows multi-line text with adjustable backlight and contrast.
• Left and right function keys plus navigation keys make setup fast.
• Core value: quick local setup and clear fault diagnosis on site.
• Hardware version: VA. Software version: 02.00.

Technical Data

• Brand
  • Lenze
• Model
  • EZAEBK1001
• Series and type
  • X400 keypad and diagnosis terminal
  • Module type: operator terminal, not a fieldbus module
• Display
  • LCD, multi-line
  • Adjustable backlight and contrast
• Keys
  • Left and right function keys
  • Navigation keys
• Connection
  • RJ69 connector to drive interface X6
• Built-in ports
  • One RJ69 diagnostic connector
• Protocols
  • None. It is a local keypad, not a fieldbus device.
• Communication expansion
  • None. It is an operator terminal.
• Supply voltage
  • Not applicable. The host drive powers it through X6.
  • No separate supply is needed.
• Power consumption
  • Not published by the maker. The drive supplies power.
• Resolution and linearity
  • Not applicable to this keypad. It is a text terminal.
• Measurement range and frequency response
  • Not applicable. It reads and writes drive data.
• Sensitivity
  • Not applicable. Key response is instant on press.
• Temperature range
  • Operating: -10 to +55 °C
  • Storage: -25 to +55 °C
  • Transport: -25 to +70 °C
• Environmental tolerance
  • Relative humidity: average 85 % RH, no condensation
  • Climatic class 3K3 per EN 50178
• Noise immunity
  • Built for industrial drive cabinets. Data comes from the host drive.
• Protection rating
  • IP20 for EZAEBK1001
  • IP65 applies only to EZAEBK200x with protective housing
• Dimensions and weight
  • Not published as a number table
  • See X400 operating instructions EDBZAEBK000X

Installation Guide

• Power down is not required. The port supports live plugging.
• Find interface X6 on the drive front.
• Align the RJ69 plug and push it in.
• Check that the LCD lights up.
• Set contrast and backlight to suit the room light.
• Keep the cable clear of motor power lines.
• Unplug by hand. Do not pull the cable.

Setup and Maintenance

• Use the function keys to open menus.
• Use the navigation keys to move and change values.
• Save changes before you unplug the keypad.
• Read fault codes on screen for fast diagnosis.
• Clean the housing with a dry cloth only.
• No battery and no service parts inside.
• Check the plug for bent pins during routine service.

Compatibility

• Lenze 8400 motec
• Lenze 8400 lonec
• Lenze 8400 protec
• Lenze 9400 servo inverters
• Requires drive interface X6 with RJ69 socket
• Not for fieldbus networks. It is a local terminal.

Certifications and Lifecycle

• Climatic class 3K3 per EN 50178
• Official document: X400 operating instructions EDBZAEBK000X
• Document source: Lenze Download Center
• Status: active L-force accessory for 8400 and 9400 families
• Audit status: OFFICIAL_VERIFIED
• Last verified: 2026-10

Expert Review

• This keypad solves one clear job. It gives fast local access to drive data.
• Plugging in during operation saves shutdown time.
• The LCD shows enough lines for fault text and parameter names.
• Function keys cut menu depth. Techs reach key values fast.
• The IP20 rating fits cabinet use. It is not for washdown areas.
• No battery means low upkeep over the unit life.
• Keep a spare in the tool bag. Swap time is seconds.

Manager’s Insight

• One shared keypad can serve many drives on a line.
• That cuts tool cost and spare-part stock.
• Fault codes on screen shorten downtime and service calls.
• Commissioning is faster with local keys than with a laptop.
• Active lifecycle means long support and easy sourcing.
• Best fit: plants with mixed 8400 and 9400 drive fleets.

Best Fit Devices and Applications

• Conveyor lines with 8400 motec drives
• Packaging machines with 8400 protec drives
• Servo axes on 9400 inverters
• Commissioning of new drive panels
• On-site fault finding during shifts
• Retrofit and service work in cabinets

Buying Guide

• Check your drive has interface X6 first.
• Pick EZAEBK1001 for cabinet use at IP20.
• Pick EZAEBK200x if you need IP65 protection.
• Match the plug type. This unit uses RJ69.
• Order one unit per service team as a start.
• Add a spare for critical lines with long run hours.
• Confirm software level 02.00 for your drive family.

Packing List and Warranty

• 1 x EZAEBK1001 X400 keypad
• 1 x protective bag
• 1 x quick start note
• Warranty: 12 months
• Dispatch: 12 to 24 hours after payment
• Couriers: FedEx, UPS, DHL
• Tracking number sent after pickup

FAQ

• Q: Does it need its own power supply?
  • A: No. The host drive powers it through the X6 port.
• Q: Can I plug it in while the drive runs?
  • A: Yes. The port supports live plugging. Keep the cable away from power lines.
• Q: Will it work on a 9400 servo inverter?
  • A: Yes. It supports 9400 units and the 8400 motec, lonec and protec families.
• Q: Is it water resistant?
  • A: No. This model is IP20. Choose EZAEBK200x with housing for IP65.
• Q: Can it join a fieldbus network?
  • A: No. It is a local operator terminal with no bus port.
• Q: How fast do you ship?
  • A: We dispatch in 12 to 24 hours by FedEx, UPS or DHL.
• Q: What if the unit fails in the first year?
  • A: It carries a 12 month warranty. Contact our sales team with the order number.
• Q: From experience, how many units should a plant keep?
  • A: Many plants keep one per shift team plus one spare for critical lines.
• Q: How do I pick between this and the IP65 version?
  • A: Use this unit in dry cabinets. Use the IP65 model near dust or splash zones.
• Q: What else should I order with it?
  • A: Check the X6 socket on each drive first. Then order one unit per team.

Contact Us

• Email: sales@powergearx.com
• WhatsApp: +86 18030005825
• We reply fast. Ask for stock and lead time before you order.

Legal

• Copyright © 2026 Powergear X Automation Limited. All rights reserved.
• Original Source: https://www.powergearx.com/