E82EV223-4B201 Lenze 8200 Vector 22 kW Inverter

E82EV223-4B201 Lenze 8200 Vector Frequency Inverter – 22 kW

Lenze E82EV223-4B201 is a 22 kW vector-controlled frequency inverter from the 8200 vector series. It delivers strong torque control for 4-pole asynchronous motors in the 400 V class. The unit suits demanding industrial drives. It also offers flexible communication and a clear migration path to newer Lenze drives.

Need a quote or stock check? Email sales@powergearx.com or chat on +86 18030005825. We ship in 12–24 hours by FedEx, UPS or DHL.

Why This Model Stands Out

• 22.0 kW rated motor power for standard 4-pole asynchronous motors.
• 47.0 A rated output current at the factory 8 kHz switching frequency.
• 70.5 A maximum output current for 60 s in periodic load cycles.
• 1.8 x rated torque for 60 s overload capability.
• Extra 2.1 x rated torque for 3 s after controller enable on 15–90 kW units.
• Output frequency range of 0–650 Hz for wide speed control.
• Selectable switching frequency: 2/4/8/16 kHz, 8 kHz as factory setting.
• Built-in RS232/485 system bus for setup and networking.
• Plug-in slots for PROFIBUS DP, CANopen, DeviceNet, INTERBUS and AS-Interface.
• Generator-mode brake chopper built in for fast stops.

Technical Data

• Brand: Lenze
• Model: E82EV223-4B201
• Series: 8200 vector
• Rated motor power: 22.0 kW (4-pole asynchronous motor)
• Rated output current: 47.0 A at 8 kHz
• Max. output current: 70.5 A for 60 s
• Output frequency: 0–650 Hz
• Switching frequency: 2/4/8/16 kHz selectable
• Mains voltage class: 400 V
• Supply voltage: 3/PE 320–550 V AC (45–65 Hz) or 450–775 V DC
• Power loss: 640 W at rated current and 8 kHz
• Integrated EMC filter: none (B201 variant)
• Integrated brake transistor: generator-mode brake chopper
• Operating temperature: -10 to +50 °C, derate 2.5%/°C above +40 °C
• Storage temperature: -25 to +60 °C
• Relative humidity: average 85% RH, no condensation (3K3 per EN 50178)
• Protection rating: IP20
• Dimensions (H×W×D): 350 × 250 × 250 mm
• Weight: 15.0 kg
• Communication: Lenze system bus; fieldbus via plug-in modules
• Control interfaces: 2 slots (3 slots above 15 kW)

Installation Guide

• Mount the unit vertically on a firm panel inside an IP20-rated enclosure.
• Keep clear space above and below for airflow. The unit loses 640 W at full load.
• Connect 3/PE 320–550 V AC mains. DC supply of 450–775 V is also allowed.
• Use shielded motor cable. Ground the shield at both ends for EMC control.
• Add an external EMC filter. The B201 variant has no integrated filter.
• Wire the brake chopper to a suitable resistor for generator-mode braking.
• Check that the motor is a 4-pole asynchronous type rated near 22 kW.
• Derate output above +40 °C ambient by 2.5% per °C.

Setup and Maintenance

• Set motor data in the parameters before the first run.
• Use the RS232/485 port for PC setup and system bus links.
• Add a plug-in module for PROFIBUS DP, CANopen or DeviceNet.
• Run the auto-tune function to match the inverter to the motor.
• Check fan flow and clean heatsinks at each service interval.
• Store spare plug-in modules for fast field swaps.

Compatibility Notes

• Works with standard 4-pole asynchronous motors in the 400 V class.
• Supports Lenze system bus devices and plug-in fieldbus modules.
• Two control slots are standard. Units above 15 kW offer three slots.
• Legacy product: Lenze lists it on the previous products page.
• No drop-in replacement exists with the same order code.
• Lenze confirms a migration path to the i950 drive.
• The i950 emulates 8200 vector behaviour via the i950 PROFIBUS module and L_ICIP library.
• The short order code differs from the canonical E82EVxxxKx type key.

Certifications and Compliance

• Climatic class 3K3 per EN 50178.
• Designed for 400 V class industrial mains networks.
• EMC performance depends on correct shielding and external filters.
• Confirm local panel and machine safety rules before installation.

Packing List and Warranty

• 1 x Lenze E82EV223-4B201 inverter
• 1 x Quick start guide
• 1 x Terminal and connector set as supplied
• 12-month warranty on the unit
• 12–24 hour dispatch after order confirmation
• Shipping by FedEx, UPS or DHL with tracking
• Order help: sales@powergearx.com or +86 18030005825

Expert Review

The 8200 vector remains a solid choice for plants that already run this platform. Its 1.8 x torque for 60 s handles heavy starts well. The 0–650 Hz range covers most speed-control jobs. The main limit is lifecycle status. Buyers should plan the i950 migration path early. For spare-part or like-for-like replacement, this unit is a practical pick.

Manager’s Insight

Stock this model for maintenance teams, not for new machine designs. Demand stays steady because many lines still use the 8200 vector series. Keep plug-in fieldbus modules on hand. They often sell with the drive. The 12-month warranty and fast dispatch help close urgent repair orders.

Best Fit Applications

• Conveyor lines and material handling systems
• Pumps and fans with variable speed control
• Mixers, agitators and extruders
• Packaging and printing machinery
• Retrofit and spare-part service for 8200 vector lines
• Machines needing PROFIBUS DP or CANopen links

FAQ

Is this inverter new or used?
Ask our team for current stock and condition before you order. Email sales@powergearx.com.

Can I get the same order code as a drop-in replacement?
No. Lenze states there is no drop-in same-order-code replacement. Plan for the i950 migration path.

Does the B201 variant include an EMC filter?
No. It ships without an integrated filter. Add an external filter for EMC compliance.

What brake option is built in?
It has a generator-mode brake chopper. Wire it to a suitable braking resistor.

How fast do you ship?
We dispatch in 12–24 hours by FedEx, UPS or DHL. Tracking is included.

What is the warranty period?
Every unit carries a 12-month warranty.

Can I use it above 40 °C?
Yes, but derate by 2.5% per °C above +40 °C. The maximum is +50 °C.

Which fieldbus modules fit?
PROFIBUS DP, CANopen, DeviceNet, INTERBUS and AS-Interface modules are supported.

Experience tip: should I buy spares now?
Yes, if your plant runs 8200 vector drives. Spare units and plug-in modules avoid long downtime.

Buying guide: when should I choose the i950 instead?
Choose the i950 for new machines or long-term projects. Choose this unit for existing 8200 vector lines and urgent repairs.

Contact us: sales@powergearx.com or +86 18030005825 for stock, pricing and shipping options.

Copyright © 2026 Powergear X Automation Limited. All rights reserved.

Original Source: https://www.powergearx.com/