E82EV152K4C000 Lenze 8200 Vector 1.5 kW Inverter

Product Overview

• E82EV152K4C000 is a Lenze 8200 vector series built-in vector-controlled frequency inverter.
• It drives a 1.5 kW four-pole asynchronous motor on a 400 V mains class.
• Rated output current reaches 3.9 A at the factory 8 kHz switching frequency.
• Peak current hits 5.9 A for 60 s under periodic load cycles.
• Output frequency spans 0 to 650 Hz for wide speed control.
• The C000 variant ships with an integrated EMC filter for cleaner mains behavior.
• A built-in brake transistor supports fast stops without extra hardware.
• Overload capability reaches 1.8 x rated torque for 60 s.
• This unit is a legacy Lenze product with an official migration path to the i950.
• Lenze confirms the i950 emulates 8200 vector behavior via the i950 PROFIBUS module and L_ICIP library.
• No drop-in same-order-code replacement exists, so plan a migration project.
• Typical users include conveyor systems, pumps, fans, and simple machine axes.

Technical Data

• Brand: Lenze
• Model: E82EV152K4C000
• Series: 8200 vector
• Module type: Built-in vector-controlled frequency inverter
• Rated motor power: 1.5 kW typical, 4-pole asynchronous motor
• Rated output current: 3.9 A nominal at 8 kHz
• Max output current: 5.9 A for 60 s
• Output frequency range: 0 to 650 Hz
• Switching frequency: 2, 4, 8, or 16 kHz selectable; 8 kHz factory setting
• Mains voltage class: 400 V
• Supply voltage: 3/PE 320 to 550 V AC, 45 to 65 Hz; DC 450 to 775 V DC alternative
• Power loss: 100 W at rated current and 8 kHz
• Overload: 1.8 x rated torque for 60 s
• Integrated EMC filter: Yes, C000 variant
• Integrated brake transistor: Yes, built-in chopper up to 11 kW
• Operating temperature: -10 to +55 °C; derate 2.5 percent per °C above +40 °C
• Storage temperature: -25 to +60 °C
• Relative humidity: Average 85 percent RH, no condensation, climatic class 3K3 per EN 50178
• Protection rating: IP20
• Dimensions (H x W x D): 240 x 60 x 140 mm per official FU 8200 vector catalogue 11/02 rated-data table
• Weight: 1.6 kg
• Built-in ports: RS232/485 serial system bus
• Protocols: Lenze system bus; fieldbus via plug-in modules such as PROFIBUS DP, CANopen, DeviceNet, INTERBUS, and AS-Interface
• Communication expansion: Two control interface slots

Installation Guide

• Mount the unit vertically on a flat panel inside a clean cabinet.
• Keep IP20 protection in mind; the drive needs a protected enclosure.
• Respect the 240 x 60 x 140 mm footprint and leave airflow space above and below.
• Connect 3/PE 320 to 550 V AC supply to the mains terminals.
• Use the integrated EMC filter to reduce mains noise.
• Wire the motor for a 1.5 kW four-pole asynchronous machine.
• Set the switching frequency to 2, 4, 8, or 16 kHz as your noise and loss targets demand.
• Above +40 °C ambient, derate load by 2.5 percent per °C.
• Keep humidity at an average 85 percent RH without condensation.
• Add a plug-in communication module for PROFIBUS DP, CANopen, DeviceNet, INTERBUS, or AS-Interface.
• For questions, reach sales@powergearx.com or +86 18030005825.

Commissioning and Maintenance

• Use the RS232/485 serial bus for quick parameter access.
• The 8 kHz factory switching frequency suits most standard motor tasks.
• Check the 1.8 x rated torque overload window before sizing the motor.
• Clean the heatsink and fan area on a fixed schedule.
• Re-tighten power terminals after the first thermal cycles.
• Log parameter sets for fast spare-unit swaps.
• Plan the i950 migration early; the 8200 vector is a legacy product.

Compatibility Notes

• Works with standard 400 V class four-pole asynchronous motors.
• Fieldbus options cover PROFIBUS DP, CANopen, DeviceNet, INTERBUS, and AS-Interface.
• Two control interface slots allow flexible communication builds.
• The official migration path targets the i950 drive family.
• Lenze confirms the i950 emulates 8200 vector behavior via the i950 PROFIBUS module and L_ICIP library.
• No drop-in replacement shares the same order code.

Certifications and Compliance

• Climatic class 3K3 per EN 50178.
• Integrated EMC filter supports electromagnetic compatibility targets.
• IP20 protection rating per the official catalogue.
• Audit status: OFFICIAL_VERIFIED.
• Last verified: 2026-10.

Packing List

• One Lenze E82EV152K4C000 frequency inverter
• One official FU 8200 vector catalogue reference sheet
• One protective shipping carton

Warranty and Shipping

• 12-month warranty covers the unit.
• Orders ship within 12 to 24 hours.
• Express options: FedEx, UPS, and DHL.
• Questions go to sales@powergearx.com or +86 18030005825.

Manager’s Insight

• This drive suits teams that still run 8200 vector spares.
• Buy it as a like-for-like service part, not as a new design choice.
• The integrated EMC filter and brake chopper save cabinet work.
• Budget migration time; no same-order-code replacement exists.
• The i950 path keeps machine behavior close to the original.
• For bulk spares, ask sales@powergearx.com about stock.

Best-Fit Equipment and Applications

• Conveyor lines and material handling units
• Centrifugal pumps and fans
• Simple machine axes and retrofit projects
• Packaging and woodworking machines
• Legacy lines that already use the 8200 vector series

FAQ

• Q: Is this unit new or used?
  A: Confirm condition with the sales team before you order.
• Q: Can it replace my old 8200 vector directly?
  A: Yes if your order code matches E82EV152K4C000.
• Q: Does it include a brake resistor?
  A: No. It includes a brake transistor only.
• Q: What if I need PROFIBUS?
  A: Add a plug-in module; the drive has two interface slots.
• Q: How fast is shipping?
  A: Orders leave within 12 to 24 hours by FedEx, UPS, or DHL.
• Q: What is the warranty term?
  A: 12 months from delivery.
• Q: Can I run it above +40 °C?
  A: Yes. Derate 2.5 percent per °C.
• Q: What should I check first on arrival?
  A: Inspect the carton, then verify the nameplate model and rating.
• Q: How do I pick a spare?
  A: Match the model code, motor power, and mains class before buying.
• Q: Should I stock one for a critical line?
  A: Yes. Legacy units get harder to source each year.
• Q: Do you help with migration?
  A: Contact sales@powergearx.com for i950 guidance.

Buying Guide

• Confirm the 400 V mains class and the 1.5 kW motor rating first.
• Check the order code E82EV152K4C000 against your old unit.
• Decide if you need a fieldbus module for PROFIBUS DP, CANopen, DeviceNet, INTERBUS, or AS-Interface.
• Add spare units for critical legacy lines.
• Plan the i950 migration path for new builds.
• Ask about lead time and stock at +86 18030005825.

Copyright © 2026 Powergear X Automation Limited. All rights reserved.

Original Source: https://www.powergearx.com/