E82EV222K2C Lenze 8200 Vector Drive 2.2 kW EMC Filter

Product Description

Lenze E82EV222K2C is a built-in vector-controlled frequency inverter from the 8200 vector series. It delivers reliable motor control for demanding industrial tasks. The unit provides 2.2 kW rated motor power for 4-pole asynchronous motors in the 230 V class. Integrated EMC filter and brake transistor come as standard. This drive suits a wide range of automation applications.

This inverter offers flexible communication options. Built-in RS232/485 serial system bus supports Lenze system bus protocol. Plug-in communication modules enable PROFIBUS DP, CANopen, DeviceNet, INTERBUS, and AS-Interface connectivity. Two control interface slots are available for expansion. This design supports easy integration into existing control systems.

Technical Data

• Brand: Lenze
• Model: E82EV222K2C
• Series: 8200 vector
• Rated motor power: 2.2 kW (typical, 4-pole asynchronous motor)
• Rated output current: 9.5 A nominal at 8 kHz switching frequency
• Max. output current: 14.2 A for 60 s (periodic load change cycle)
• Output frequency: 0…650 Hz
• Switching frequency: 2/4/8/16 kHz selectable (8 kHz factory setting)
• Mains voltage class: 230 V
• Integrated EMC filter: Yes (C0xx base code)
• Integrated brake transistor: Yes (built-in chopper up to 11 kW)
• Overload capability: 1.8 x rated torque for 60 s
• Supply voltage: 1/N/PE 180…264 V AC (single-phase, 45…65 Hz); 3/PE 100…264 V AC for 3-phase versions; alternative DC 260…370 V DC supply (except E82EV251/371 units)
• Power loss: 130 W at rated current / 8 kHz
• Operating temperature: -10…+55 °C (derated by 2.5%/°C above +40 °C)
• Storage temperature: -25…+60 °C
• Relative humidity: Average 85 % RH, without condensation (climatic class 3K3 per EN 50178)
• Protection rating: IP20
• Dimensions (H×W×D): 240 × 60 × 140 mm
• Weight: 1.6 kg

Installation Guide

• Mount the inverter vertically on a flat surface. Keep clearance for airflow. Ensure IP20 protection is suitable for your environment. Use single-phase 230 V AC supply or three-phase 100…264 V AC as applicable. Connect the integrated EMC filter to meet local regulations. Wire the brake resistor to the built-in chopper if needed. Follow Lenze wiring diagrams for safe operation.

Commissioning and Maintenance

• Set motor parameters via the keypad or Lenze software. Default switching frequency is 8 kHz. Adjust to 2, 4, or 16 kHz as required. The drive supports 0…650 Hz output frequency. Check overload settings: 1.8 x rated torque for 60 s. Regular maintenance includes cleaning air vents and checking connections. No special tools are needed for basic parameter changes.

Compatibility Notes

• This drive works with standard 4-pole asynchronous motors up to 2.2 kW. It accepts plug-in communication modules for PROFIBUS DP, CANopen, DeviceNet, INTERBUS, and AS-Interface. Two control interface slots are available. The 8200 vector series is a legacy product. Lenze confirms migration to the i950 generation. The i950 emulates 8200 vector behavior via i950 PROFIBUS module and L_ICIP library. No drop-in same-order-code replacement exists.

Certifications and Compliance

• Integrated EMC filter according to C0xx base code. Climatic class 3K3 per EN 50178. Protection rating IP20. Official Lenze “previous products” page is active. Audit status: OFFICIAL_VERIFIED. Last verified: 2026-10.

Package Contents and Warranty

• 1 x Lenze E82EV222K2C inverter. 1 x Quick start guide. Warranty: 12 months. Ships within 12-24 hours via FedEx, UPS, or DHL. For inquiries: sales@powergearx.com or +86 18030005825 (WhatsApp).

Manager’s Insight

The Lenze E82EV222K2C offers a solid balance of power and flexibility for legacy systems. Its built-in EMC filter saves panel space. The plug-in communication slots future-proof connectivity. This drive suits OEMs maintaining existing 8200 vector installations. For new designs, consider the i950 migration path. The 2.2 kW rating fits many standard conveyor, pump, and fan applications. The IP20 rating requires a protective enclosure. Overload capacity of 1.8 x rated torque for 60 s handles moderate shock loads. Stock availability supports fast replacement.

Expert Review

Industrial users value the 8200 vector series for its reliability. The E82EV222K2C continues this tradition. The integrated brake chopper simplifies dynamic braking tasks. Switching frequency options up to 16 kHz reduce motor noise. The single-phase 230 V supply suits smaller installations. The operating range of -10…+55 °C with derating above +40 °C covers many factory floors. The RS232/485 port enables simple setup. Fieldbus modules add advanced control. The main drawback is the legacy status. Plan for migration to i950 when long-term support is critical. For current 8200 vector users, this model is a direct, reliable replacement.

Best Suited Equipment and Applications

• Conveyor systems
• Pumps and fans
• Material handling equipment
• Packaging machines
• Textile machinery
• Woodworking equipment
• Retrofit projects for existing 8200 vector installations

FAQ

Q: Can I use this inverter with a single-phase 230 V supply?

A: Yes. The E82EV222K2C accepts 1/N/PE 180…264 V AC, 45…65 Hz.

Q: Does this drive include a brake resistor?

A: No. It has a built-in brake transistor (chopper). You must connect an external brake resistor.

Q: What is the maximum output frequency?

A: The drive supports 0…650 Hz output frequency.

Q: How do I connect to PROFIBUS?

A: Install a plug-in communication module for PROFIBUS DP in one of the two control interface slots.

Q: Is this product still supported by Lenze?

A: It is a legacy product. Lenze offers a migration path to the i950 series, which emulates 8200 vector behavior.

Q: What is the overload capacity?

A: The drive provides 1.8 x rated torque for 60 s.

Q: How fast is shipping?

A: Orders ship within 12-24 hours via FedEx, UPS, or DHL.

Q: What is the warranty period?

A: 12 months from the date of purchase.

Q: Do you offer technical support?

A: Contact sales@powergearx.com or +86 18030005825 for assistance.

Buying Guide

Match the drive’s 2.2 kW rating to your motor’s full-load power. Confirm your supply voltage is within 180…264 V AC for single-phase or 100…264 V AC for three-phase. Check that your motor is a 4-pole asynchronous type. Verify the IP20 protection fits your panel environment. If you need fieldbus control, order the correct plug-in module for PROFIBUS DP, CANopen, DeviceNet, INTERBUS, or AS-Interface. Consider an external brake resistor for high-inertia loads. For new projects, evaluate the i950 migration path. For replacements, verify the E82EV222K2C matches your existing 8200 vector unit’s order code. Ensure adequate panel space: 240 × 60 × 140 mm. Plan for 12-24 hour dispatch and 12-month warranty coverage.

Contact Information Inquiries: sales@powergearx.com or +86 18030005825 (WhatsApp).

Copyright © 2026 Powergear X Automation Limited. All rights reserved.

Original Source: https://www.powergearx.com/