Name: BMXAMI0810H Schneider Modicon X80 8-Channel Analog Input Module | Coated
SKU: BMXAMI0810H
Price: 234.00 USD
Availability: InStock

Product details

Product Snapshot

Model BMXAMI0810H is an 8-channel analog input module.
It belongs to the Schneider Electric Modicon X80 series.
This is the high speed version with conformal coating.
It reads voltage and current signals on each channel.
The module serves both M340 and M580 controllers.
It suits harsh plant floors with dust, heat, or moisture.

Core Strengths

8 inputs in one narrow slot.
16-bit resolution for smooth, stable data.
0.1% FS accuracy keeps readings tight.
Channel-to-channel isolation blocks cross noise.
Conformal coating protects the board in tough rooms.

Technical Data

Brand: Schneider Electric
- Model: BMXAMI0810H
- Series: Modicon X80
- Type: Analog input module
I/O:
- Channels: 8
- Signal type: Voltage and current
- Range: Multi-range, user set
- Resolution: 16-bit
- Accuracy: Up to 0.1% full scale
- Isolation: Between channels
- Diagnostics: Status LED
Power:
- Supply: 24 V DC
- Consumption: 3.1 W
- Bus current: 130 mA at 24 V DC
Environment:
- Running heat: 0°C to +60°C
- Storage cold and heat: -25°C to +70°C
- Humidity: 5% to 95%, no condensation
- Ingress rating: IP20
Body:
- Size (H x W x D): 100 x 28 x 93 mm
- Mass: 0.17 kg
Status: Active. Checked 2026-09.

Install Guide

Pick a free slot on the X80 rack.
Push the module in until it clicks.
Tighten the screw to lock it.
Wire each channel with shielded cable.
Keep signal wires away from motor lines.
Set the range in your software.
Power up and watch the LED.

Setup and Care

Fits With

Modicon M340 racks
Modicon M580 racks
X80 backplanes and power supplies
Modbus and Ethernet control networks
Not for older Quantum or Premium racks

Approvals

Common industrial marks apply to this family.
Look for CE, UL, and RoHS on the label.
Ask us for the exact certificate file.

Box Contents

1 x Schneider Electric BMXAMI0810H module
1 x quick start sheet
Factory sealed carton

Warranty and Dispatch

Cover: 12 months
Leave warehouse: 12 to 24 hours
Carriers: FedEx, UPS, DHL
Track number sent after pickup.
Mail sales@powergearx.com for stock checks.
Chat on +86 18030005825 for rush orders.

Expert Review

This unit blends speed, accuracy, and rugged coating.
Eight isolated inputs save rack space.
The 16-bit core gives clean process data.
Coating helps in wet or dirty plants.
The weak point is simple: IP20 only.
Keep it inside a proper cabinet.

Manager’s Insight

Buy this when your line runs M340 or M580.
It cuts wiring cost by placing I/O near sensors.
Stock one spare for critical loops.
Coated boards last longer in humid sites.
Fast dispatch keeps shutdowns short.

Where It Works Best

Buying Tips

Check your rack type before you order.
Count analog points to size the card count.
Note the range you need: volts or amps.
Pick the coated H version for damp areas.
Ask for firmware and date code.
Email sales@powergearx.com for a fast quote.

FAQ

Q: How many wires per channel?
A: It depends on your sensor. Most loops use two or three wires.
Q: Can I mix volts and amps on one card?
A: Yes. You set each channel in software.
Q: Why does my reading drift?
A: A ground loop is the common cause. Use shielded cable and one ground point.
Q: What if the LED stays off?
A: Check rack power and the slot address first.
Q: Is the coating enough for washdown?
A: No. The rating is IP20. Use a sealed cabinet.
Q: What is the warranty?
A: 12 months from delivery.