Product details
Product Overview
- ATV320U15N4WS is a Schneider Electric Altivar Machine drive.
- Moreover, it delivers 1.5 kW (2 HP) for three-phase 380…500 V supplies.
- The IP65 wall-mount enclosure also includes a Vario disconnect switch.
- A category C2 EMC filter is built in. Therefore, no extra filter is needed.
- For example, the drive suits conveyors, packaging machines, and material handling.
- In addition, it controls asynchronous motors and synchronous PM motors in open loop.
- STO up to SIL3/PLe supports safe machine stop. Thus, no extra safety hardware is needed.
Key Technical Data
- Brand: Schneider Electric
- Model: ATV320U15N4WS
- Series: Altivar Machine ATV320
- Module type: IP65 wall-mount variable speed drive
- Motor power: 1.5 kW (2 HP) at 380…500 V three-phase
- Output frequency range: 0.1 to 599 Hz
- Nominal output current In: 4.1 A at 4 kHz switching frequency
- Transient output current: 6.2 A for up to 60 s (150% of In)
- Overload torque: up to 200% Tn over-torque and 170% Tn braking torque in open loop
- Switching frequency: 2 to 16 kHz programmable; still factory set at 4 kHz
- Resolution: analog output 10 bits; pulse input up to 20 kHz; pulse output up to 32 kHz
- Control accuracy: stable speed hold via sensorless flux vector control
- Analog inputs: 1 bipolar differential ±10 V, 1 voltage 0…10 V, and 1 current 0-20 mA
- Digital inputs: 6 total; 4 configurable 24 V DC sink/source, 1 PTC probe, and 1 pulse input
- Analog output: 1 channel, 0…10 V or 0/4-20 mA
- Digital output: 1 configurable 24 V DC sink/source, max 100 mA
- Relay outputs: 1 NO/NC contact plus 1 NO contact, 3 A at 250 VAC resistive load
- Pulse output: 24 V, max 32 kHz, 0.1 A
- Safety inputs: 1 STO input plus 4 configurable safety inputs (SS1, SLS, SMS, GDL)
- Braking: external resistor connection; therefore minimum value is 54 Ω
- Supply voltage: 380…500 V three-phase, -15%/+10%, 50/60 Hz
- Maximum input current: 6.4 A at 380 V; meanwhile 4.9 A at 500 V
- Apparent power: 4.2 kVA at 500 V maximum
- SCCR: 5 kA maximum
- Power dissipation: 56 W at In and rated switching frequency
- Temperature range: -10 to +50 °C without derating; however up to 60 °C with derating
- Storage temperature: -25 to +70 °C
- Humidity tolerance: 5…95%, no condensation, and no dripping water
- Altitude: no derating to 1000 m; then derate 1% per 100 m up to 3000 m
- Noise immunity: the integrated C2 EMC filter limits conducted emissions
- Shielded motor cable: 10 m maximum at 4 kHz, category C2 or C3
- Protection rating: IP65
- Dimensions (H×W×D): 340 x 250 x 200 mm
- Weight: 6.400 kg (14.109 lb)
Installation Guide
- First, mount the drive vertically. Keep tilt within ±10°.
- Then leave 100 mm clearance around the enclosure for airflow.
- Tighten power terminals to 1.4 N·m and control terminals to 0.6 N·m.
- Also use wire cross-sections from 2.5 to 6 mm² (Frame 2).
- Keep shielded motor cables within 10 m at 4 kHz. Otherwise noise rises.
- Connect the STO input for safe torque off. Still follow SIL3 wiring rules.
- Add an external braking resistor if the load needs fast stops. In that case the minimum value is 54 Ω.
Setup and Maintenance
- Use the RJ45 port for CANopen or Modbus Serial line setup.
- Moreover, add a communication module in the single expansion slot when needed.
- For faster tuning, use the optional VW3A1111 or VW3A1101 display terminal.
- First set motor data with the drive wizard. Then run auto-tune for open-loop vector control.
- Check fan paths and terminal torque at each service interval. As a result, trips drop.
- The IP65 enclosure allows washdown-area mounting. Therefore panel cleaning work falls.
Compatibility Notes
- It works with asynchronous motors using U/F or sensorless flux vector control.
- It also works with synchronous PM motors using sensorless vector control.
- Built-in protocols are CANopen and Modbus Serial line.
- In addition, optional modules add Modbus TCP/EtherNet/IP, PROFIBUS DP V1, DeviceNet, EtherCAT, POWERLINK, or PROFINET.
- Accessories include UL Type 1 kits, DIN rail plates, a GV2 breaker bracket, and a 90-degree control module adapter.
Certifications
- UL 508C and UL 61800-5-1
- CSA 22.2 N274
- EN/IEC 61800-3 category C2/C3
- EN/IEC 61800-5-1
- IEC 61800-5-2 up to SIL3 and IEC 61508 SIL3
- IEC 13849-1 PLe
- IEC 60721-3-3 class 3C3/3S2
- RCM, EAC, KC
- However, the manufacturer publishes no product-level cybersecurity certificate.
Packing List
- 1 x ATV320U15N4WS drive with Vario disconnect switch
- 1 x installation manual (NVE41289 reference)
- 1 x safety information sheet
- Terminal labels and cable clamp parts as shipped by Schneider Electric
- Optional display terminal and communication module ship separately. Thus, order them apart.
FAQ
- Q: Can this drive run a 1.5 kW motor at 400 V?
Yes. The 380…500 V three-phase input matches standard 400 V motors at 1.5 kW. - Q: Does the drive need an external EMC filter?
No. A category C2 filter is integrated. Therefore keep motor cables shielded and short. - Q: What is the minimum braking resistor value?
54 Ω. Moreover, the installation manual lists this limit for safe braking. - Q: Can I mount the drive outdoors?
The IP65 rating blocks dust and water jets. Still add a sun shield and stay within the temperature range. - Q: How do I reach SIL3 safety?
Wire the STO input per the manual. Thus the safety functions support SIL3 and PLe. - Q: Which protocol works out of the box?
CANopen and Modbus Serial line run on the built-in RJ45 port. Other protocols need an optional module. - Q: From experience, what causes nuisance trips at high switching frequency?
High carrier frequency raises heat. Therefore derate above 4 kHz and check enclosure airflow first. - Q: From experience, why does the drive show an overcurrent fault at start?
Long motor cables or a stiff load cause this. In practice, shorten the cable, check the ramp time, and verify motor data. - Q: From experience, how do I cut setup time?
First load the motor nameplate values. Then run auto-tune and save the configuration to the display terminal.















There are no reviews yet.