Over 50,000 hot-selling automation module components.

ATV320U07N4W Schneider Altivar Machine Drive 0.75 kW IP66

0 Reviews
In stock
  • 100% genuine products in stock with fast delivery.
  • 30-day return policy for quality assurance.
  • 12-month warranty for peace of mind.
SKU: ATV320U06N4W-1
Brands:

Product details

ATV320U07N4W | Schneider Electric Altivar Machine ATV320 0.75 kW IP66 Drive

Meet the ATV320U07N4W. It is a three-phase speed drive from the Altivar Machine ATV320 range by Schneider Electric. It gives 0.75 kW (1 HP) on 380 to 500 V supplies. The IP66 housing is sealed. A category C2 EMC filter is already inside. You save cabinet space and wiring time. The unit fits small machines that must keep running in dust or wet areas. It also brings safety functions up to SIL3/PLe and a 599 Hz output limit in the same box.

Identity

  • Brand: Schneider Electric
  • Model: ATV320U07N4W
  • Series: Altivar Machine ATV320
  • Type: Three-phase variable speed drive, wall mount, IP66

Power Path

  • Motor power: 0.75 kW (1 HP) at 380 to 500 V three-phase
  • Nominal output current: 2.3 A at 4 kHz
  • Transient current: 3.5 A for 60 s (150% of In)
  • Output frequency: 0.1 to 599 Hz
  • Switching frequency: 2 to 16 kHz, 4 kHz from factory; derate above 4 kHz
  • Overload torque: up to 200% Tn over-torque and 170% Tn braking torque
  • Rating: single rating; no Normal Duty or Heavy Duty split

Supply Side

  • Voltage: 380 to 500 V three-phase, -15%/+10%, 50/60 Hz
  • Input current: 3.6 A at 380 V; 2.8 A at 500 V
  • Apparent power: 2.4 kVA at 500 V maximum
  • SCCR: 5 kA maximum
  • Losses: 32 W at In and rated switching frequency

Motor Control

  • Async motor: U/F ratio (2-point, 5-point, energy-saving, quadratic) and sensorless flux vector control
  • PM motor: sensorless vector control
  • Analog path: 10-bit resolution on the analog output

I/O Tree

  • Analog inputs
    • 1 x bipolar differential ±10 V
    • 1 x 0 to 10 V
    • 1 x 0 to 20 mA
    • PTC probe support
  • Digital inputs
    • 4 x 24 V DC, sink/source, configurable
    • 1 x PTC probe
    • 1 x pulse, up to 20 kHz
  • Digital output: 1 x 24 V DC sink/source, 100 mA maximum
  • Analog output: 1 x 0 to 10 V or 0/4 to 20 mA, 10 bits
  • Relay outputs
    • 1 x NO/NC contact
    • 1 x NO contact
    • 3 A at 250 VAC resistive load
  • Pulse output: 1 x 24 V, 32 kHz maximum, 0.1 A
  • Safety inputs
    • 1 x STO
    • 4 x configurable for SS1, SLS, SMS and GDL
    • STO reaches SIL3 and PLe

Braking

  • Method: external dynamic braking resistor
  • Minimum value: 80 Ω
  • Note: this power size needs an external resistor for fast stops

Network Tree

  • Built-in port
    • 1 x RJ45
    • CANopen
    • Modbus Serial Line
  • Expansion slot
    • Modbus TCP and EtherNet/IP
    • PROFIBUS DP V1
    • DeviceNet
    • EtherCAT
    • POWERLINK
    • PROFINET
  • Cyber certificate: none published by the maker

Climate and Immunity

  • Protection: IP66
  • Running temperature: -10 to +50 °C with no derating; up to 60 °C with derating
  • Storage temperature: -25 to +70 °C
  • Humidity: 5 to 95%, no condensation, no dripping water
  • Height: no derating to 1000 m; 1% current loss per 100 m up to 3000 m
  • EMC: built-in C2 filter; 10 m shielded motor cable at 4 kHz (C2 and C3)
  • Ambient class: IEC 60721-3-3 class 3C3/3S2

Size and Weight

  • Dimensions (H×W×D): 340 x 250 x 200 mm
  • Weight: 5.900 kg (13.007 lb)
  • Terminal torque: 1.4 N·m power, 0.6 N·m control (Frame 2)
  • Wire size: 2.5 to 6 mm² (Frame 2)

Where It Fits

  • Conveyors and transport lines that need steady torque at low speed
  • Packaging and labeling machines with tight space and washdown risk
  • Pumps and fans in food, water and HVAC plants
  • Material handling such as roller drives and small hoists
  • Textile, wood and metal shops with dusty air
  • Outdoor skids where a sealed box replaces a full cabinet

Mounting and Setup

  • Mount upright. A tilt of ±10° is fine.
  • Leave 100 mm free space on all sides.
  • Tighten power screws to 1.4 N·m and control screws to 0.6 N·m.
  • Use wire from 2.5 to 6 mm².
  • Keep shielded motor cable at or under 10 m for C2 EMC.
  • Fit a resistor of at least 80 Ω for braking duty.
  • Cut current 1% per 100 m above 1000 m altitude.

Service and Upkeep

  • Set up the unit over the RJ45 port with Modbus or CANopen.
  • Add the VW3A1111 or VW3A1101 terminal for local control.
  • Copy settings to a spare drive to cut downtime.
  • The sealed housing needs no filter swap.
  • Stay at 4 kHz unless you check the derating curve.

Fit and Match

  • Drives standard async motors and PM motors.
  • Works on 380 to 500 V grids at 50 or 60 Hz.
  • Pairs with GV2 breakers using the mounting bracket.
  • Takes DIN rail plates and UL Type 1 kits.
  • Adds one fieldbus module through the free slot.

Approvals

  • UL 508C and UL 61800-5-1
  • CSA 22.2 N274
  • EN/IEC 61800-3 category C2/C3
  • EN/IEC 61800-5-1
  • IEC 61800-5-2 up to SIL3 and IEC 61508 SIL3
  • ISO 13849-1 PLe
  • IEC 60721-3-3 class 3C3/3S2
  • RCM, EAC and KC

In the Box

  • 1 x ATV320U07N4W drive
  • 1 x printed installation manual
  • 1 x safety sheet
  • Terminal parts as packed by Schneider Electric
  • Display terminal and brake resistor sold apart

FAQ

Which loads suit the 0.75 kW size?

Light duty work fits best. Think small conveyors, fans, pumps and roller tables. Check that the motor current stays near 2.3 A.

Can this unit run a PM motor?

Yes. It offers sensorless vector control for synchronous PM motors. You also get U/F and flux vector modes for async motors.

How long can the motor cable be?

Keep shielded cable at or under 10 m at 4 kHz. This holds the C2 EMC level. Longer runs may need extra filtering.

What happens at high altitude?

Nothing up to 1000 m. Above that, drop the current by 1% per 100 m. Stop at 3000 m unless you consult the manual.

How do I swap a failed drive fast?

Store the setup on a terminal or over the bus. Load the same file into the new unit. This skips manual re-entry and shortens the stop.

Does it carry a cyber security certificate?

No. Schneider Electric publishes no product-level cyber statement for this model. Guard the network on your side and limit remote access.

Specifications

  • BrandAllen-Bradley
  • Part Number22A-B012F104
  • ConditionOriginal Brand New

Customers Reviews

There are no reviews yet.

Be the first to review “ATV320U07N4W Schneider Altivar Machine Drive 0.75 kW IP66”

Your email address will not be published. Required fields are marked *

Back to Top
Product has been added to your cart