Product details
Product Overview
ATV320U06N4WS is a Schneider Electric Altivar Machine drive. It delivers 0.55 kW for three-phase motors. The IP65 wall-mount enclosure suits tough plant floors. A Vario disconnect switch saves wiring time. The built-in C2 EMC filter cuts noise. Setup is fast for OEM machines and simple conveyors.
Technical Specifications
- Brand: Schneider Electric
- Model: ATV320U06N4WS
- Series: Altivar Machine ATV320
- Module type: IP65 wall-mount three-phase variable speed drive
- Motor power: 0.55 kW (0.75 HP)
- Supply voltage: 380 to 500 V three-phase, -15%/+10%, 50/60 Hz
- Output frequency range: 0.1 to 599 Hz
- Nominal output current: 1.9 A at 4 kHz
- Transient current: 2.9 A for 60 s (150% overload)
- Overload torque: up to 200% Tn; braking torque 170% Tn
- Switching frequency: 2 to 16 kHz, factory set 4 kHz
- Resolution: analog output 10 bits
- Control modes: U/F ratio, sensorless flux vector, PM motor vector control
- Analog inputs: one ±10 V differential, one 0 to 10 V, one 0 to 20 mA
- Digital inputs: six, including one PTC probe and one pulse input up to 20 kHz
- Digital output: one 24 V DC sink/source, 100 mA max
- Relay outputs: one NO/NC plus one NO, 3 A at 250 VAC
- Analog output: one, 0 to 10 V or 0/4 to 20 mA
- Pulse output: 24 V, up to 32 kHz, 0.1 A
- Safety inputs: one STO plus four configurable safety inputs
- Operating temperature range: -10 to +50 °C without derating; up to 60 °C with derating
- Storage temperature: -25 to +70 °C
- Relative humidity: 5 to 95%, no condensation
- Altitude: 1000 m without derating; 1% per extra 100 m up to 3000 m
- Environmental tolerance: class 3C3/3S2 per IEC 60721-3-3
- Noise immunity: integrated C2 EMC filter, shielded cable up to 10 m
- Protection rating: IP65
- Dimensions (H x W x D): 340 x 250 x 200 mm
- Weight: 6.300 kg
- Power dissipation: 27 W at In
- Input current: 2.8 A max at 380 V; 2.2 A max at 500 V
- SCCR: 5 kA maximum
- Minimum brake resistor: 80 Ω
Installation Guide
- Mount the drive vertically, tilt within ±10°.
- Keep 100 mm clearance around the unit.
- Tighten power terminals to 1.4 N·m.
- Tighten control terminals to 0.6 N·m.
- Use wire from 2.5 to 6 mm² on Frame 2.
- Keep shielded motor cable under 10 m.
- Add an external brake resistor for U04 to U15 models.
Setup and Maintenance
- Program the drive from the keypad or the VW3A1111 graphic terminal.
- Run the motor auto-tune for vector control.
- Set the switching frequency above 4 kHz only with derating.
- Clean the IP65 cover with a damp cloth.
- Check fan and cable torque at each service visit.
- Store spare units from -25 to +70 °C.
Compatibility
- Built-in RJ45 port supports CANopen and Modbus Serial line.
- One slot takes Modbus TCP/EtherNet/IP, PROFIBUS DP V1, DeviceNet, EtherCAT, POWERLINK or PROFINET modules.
- Works with asynchronous and synchronous PM motors.
- Optional UL Type 1 kits, DIN rail plates and GV2 breaker bracket fit this frame.
Certifications
- UL 508C and UL 61800-5-1
- CSA 22.2 N274
- EN/IEC 61800-3 category C2/C3
- EN/IEC 61800-5-1
- IEC 61800-5-2 up to SIL3; IEC 61508 SIL3; ISO 13849-1 PLe
- IEC 60721-3-3 class 3C3/3S2
- RCM, EAC and KC marks
Packing List
- One ATV320U06N4WS drive
- One printed installation manual
- One safety information sheet
- Terminal labels and cable clamp set
- Box weight: 6.300 kg
FAQ
Q: Can this drive run a 0.75 HP motor?
A: Yes. It delivers 0.55 kW, which equals 0.75 HP at 380 to 500 V.
Q: Does it include a braking resistor?
A: No. You must add an external resistor of at least 80 Ω.
Q: Which network comes built in?
A: CANopen and Modbus Serial line share the RJ45 port.
Q: How long can the motor cable be?
A: Keep the shielded cable at 10 m or less at 4 kHz.
Q: Is a disconnect switch included?
A: Yes. The Vario switch ships with the unit.
Q: What does field experience show about installation?
A: Most callbacks come from loose terminals. Torque them twice. Keep the 100 mm gap clear. Do not block the fan.
Q: What is a common setup mistake?
A: Users raise the switching frequency too high. This derates power and adds heat. Stay at 4 kHz unless the motor needs more.
















There are no reviews yet.