Product details
ATV320U07N4WS Schneider Electric Altivar Machine ATV320 0.75 kW Drive with Switch
ATV320U07N4WS is a 0.75 kW three-phase drive from Schneider Electric. It sits in the Altivar Machine ATV320 line. The IP65 wall-mount body carries a Vario disconnect switch and a C2 EMC filter. You get one sealed unit for small motors, wet areas, and quick lockout.
- One-line pitch: small sealed drive, built-in switch, less wiring work
- Sweet spot: 1 HP motors on conveyors, fans, pumps, and compact machines
- Standout: C2 filter inside, so no extra EMC box
Why Buyers Pick This Unit
- Mount where the work is: put it on the frame
- No separate switch enclosure
- Front Vario switch for isolation
- Safe service: simple lockout
- Turn switch to off
- Add a padlock
- Less hardware: filter is internal
- C2 grade on board
- 10 m shielded motor cable at 4 kHz
- Two motor families: one drive
- Standard induction motors
- PM motors with sensorless vector
- Tough rooms: IP65 shell
- Blocks dust and water jets
- Fits washdown zones
Spec Tree
- Brand: Schneider Electric
- Model: ATV320U07N4WS
- Series: Altivar Machine ATV320
- Type: IP65 wall-mount three-phase variable speed drive
- Motor power: 0.75 kW (1 HP)
- Supply: 380 to 500 V three-phase, -15%/+10%, 50/60 Hz
- Input current: 3.6 A max at 380 V, 2.8 A max at 500 V
- Output current In: 2.3 A continuous at 4 kHz
- Short-time current: 3.5 A for 60 s (150% In)
- Apparent power: 2.4 kVA max at 500 V
- Short-circuit rating: SCCR 5 kA
- Output frequency: 0.1 to 599 Hz
- Carrier frequency: 2 to 16 kHz, factory 4 kHz
- Control: U/F, sensorless vector, PM vector
- Torque: 200% Tn over-torque, 170% Tn braking in open loop
- EMC filter: C2 built in
- Cable limit: 10 m shielded motor cable at 4 kHz
- Braking: external resistor
- Min value: 80 Ω
- Heat loss: 32 W at In
- Motor power: 0.75 kW (1 HP)
- Type: IP65 wall-mount three-phase variable speed drive
- Series: Altivar Machine ATV320
- Model: ATV320U07N4WS
I/O and Safety Tree
- Analog inputs: 3 total
- 1 bipolar differential ±10 V
- 1 voltage 0 to 10 V
- 1 current 0 to 20 mA, PTC probe ready
- Digital inputs: 6 total
- 4 configurable 24 V DC sink/source
- 1 PTC probe input
- 1 pulse input up to 20 kHz
- Outputs:
- 1 digital 24 V DC, 100 mA max
- 1 analog, 0 to 10 V or 0/4 to 20 mA, 10 bits
- 2 relays: 1 NO/NC plus 1 NO, 3 A at 250 VAC
- 1 pulse train, 24 V, 32 kHz max, 0.1 A
- Safety:
- 1 STO input plus 4 configurable safety inputs
- Functions: STO, SS1, SLS, SMS, GDL
- Level: up to SIL3 / PLe
Network and Options Tree
- Built-in: 1 RJ45 port
- CANopen
- Modbus Serial line
- Optional slot: 1 module
- Modbus TCP / EtherNet/IP
- PROFIBUS DP V1
- DeviceNet
- EtherCAT
- POWERLINK
- PROFINET
- Add-ons:
- Graphic display terminal VW3A1111 / VW3A1101
- Remote display terminal
- UL Type 1 kits
- DIN rail plates
- GV2 breaker bracket
- 90-degree control module adapter
- External braking resistors
Good Fits on the Floor
- Small conveyors: smooth starts, less spill
- Infeed belts
- Parts transfer lines
- Fans and blowers: quadratic U/F saves power
- Panel cooling fans
- Small extractors
- Pumps: steady pressure
- Coolant loops
- Lube pumps
- Packaging cells: repeatable speed
- Label heads
- Small fillers
- Food and drink lines: washdown ready
- Rinse stations
- Bottle infeed
- Wood and metal shops: dusty air
- Feed rollers
- Small spindles
Environment and Build
- Ambient: -10 to +50 °C no derating, up to 60 °C with derating
- Storage: -25 to +70 °C
- Humidity: 5 to 95%, no condensation
- Altitude: 1% current derating per 100 m above 1000 m
- Air class: IEC 60721-3-3 3C3/3S2
- Size: 340 x 250 x 200 mm (H×W×D)
- Weight: 6.300 kg (13.889 lb)
- Torque: 1.4 N·m power, 0.6 N·m control
- Wire: 2.5 to 6 mm²
- Clearance: 100 mm around the unit
Approvals
- UL 508C and UL 61800-5-1
- CSA 22.2 N274
- EN/IEC 61800-3 C2 and C3
- EN/IEC 61800-5-1
- IEC 61800-5-2 SIL3
- IEC 61508 SIL3
- IEC 13849-1 PLe
- RCM, EAC, KC
Note: the maker does not list a product-level cyber security certificate for this model.
In the Carton
- 1 x ATV320U07N4WS drive with switch
- 1 x manual NVE41289
- 1 x safety sheet
- Terminal parts as sent by Schneider Electric
- Sold apart: display, network module, brake resistor, mount kits
FAQ
- Will this run a 1 HP motor at full torque?
- Yes, up to 2.3 A steady. Short bursts reach 3.5 A for one minute.
- Is a line reactor needed?
- Not for most sites. The C2 filter handles standard EMC needs. Add a reactor if the supply is weak or noisy.
- How close can it sit to the motor?
- Keep shielded cable under 10 m at 4 kHz. Shorter is better.
- Can the switch take a padlock?
- Yes. The Vario handle accepts a lockout hasp for safe service.
- Does it ship with a display?
- No. The graphic terminal is an add-on. Many users set parameters over Modbus instead.
- Site tip: motor hums at low speed. Any fix?
- Raise the carrier frequency a step or two. Check that the motor cable shield bonds well at both ends.
- Site tip: the drive trips when a big machine starts nearby. What first?
- Check supply voltage dip. Add a line reactor or move the drive to a stiffer feeder.
- Site tip: can I swap this for a U04 unit without rewiring?
- Yes. Both share Frame 2 size and terminals. Match the motor current to the new rating.
- Site tip: water hose spray hits the unit daily. Any risk?
- The IP65 shell handles jets. Keep glands tight and avoid direct spray on the cable entries.
















There are no reviews yet.