Product details
Product Overview
- SEC-Z514KX and SEF-Z514KX come from the trusted HORIBA STEC SEC-Z500X series.
- The SEF-Z514KX is a mass flow meter built for accurate gas measurement.
- The SEC-Z514KX is the matching mass flow controller.
- Multi-gas and multi-range operation is set by configuration software.
- Users simply enter the gas type and flow range to pick MR/MG numbers.
- A handy N2 gas conversion feature supports receipt inspections.
- HORIBA STEC runs software operation seminars to prevent setup errors.
- Contact your HORIBA STEC representative for seminar details.
Key Technical Data
- Brand: HORIBA STEC
- Models: SEC-Z514KX (controller) / SEF-Z514KX (meter)
- Series: SEC-Z500X
- Full-scale flow (N2): 1/2 SCCM
- Measuring range (SEF): 0 to 100% of full scale
- Control range (SEC): 2 to 100% of full scale
- Accuracy: plus or minus 1.0% F.S.
- Linearity: within plus or minus 0.5% F.S.
- Repeatability: within plus or minus 0.2% F.S.
- Response time: 1 second or less over the full range
- Operating temperature: 5 to 50 degrees C (best at 15 to 45 degrees C)
- Operating differential pressure: 50 to 300 kPa (d); SEF up to 300 kPa (d)
- Max operating pressure: 450 kPa (g)
- Pressure resistance: 1000 kPa (g)
- Leak integrity: 5 x 10 to the minus 12 Pa cubic meters per second (He)
- Valve type: O (normally open) or C (normally closed)
- Closed-valve flow: 2% F.S. or less
- Wetted materials: 316L stainless steel with polished surface
- Digital interface: DeviceNet protocol
- Power supply: ODVA compliant, DC 24 V, 4.0 VA
- Standard fitting: 1/4 inch VCR equivalent; options include 1.125 inch IGS and 1.5 inch IGS
- Mounting: any orientation
Installation Guide
- Mount the unit in any position. The design needs no fixed angle.
- Keep differential pressure between 50 and 300 kPa (d) for control.
- Stay below 450 kPa (g) working pressure and 1000 kPa (g) proof pressure.
- Use the standard 1/4 inch VCR fitting, or pick the IGS option.
- Wire DC 24 V power per ODVA rules. Power draw is just 4.0 VA.
- Connect the RS-485 link through the LAN or serial converter.
- Use a USB serial converter if your PC lacks a serial port.
- Run setup on Windows 2000, XP or Vista in English or Japanese.
Setup and Maintenance Ease
- Configuration software cuts setup time and avoids manual errors.
- Enter gas type and range. The tool sets MR/MG numbers for you.
- The N2 conversion mode simplifies incoming inspection checks.
- HORIBA STEC seminars help teams use the software with confidence.
- The polished 316L body resists corrosion and is easy to clean.
- Few parts and a simple layout keep service work short.
Compatibility Notes
- Works with the SEC-Z500X LAN cable and RS-485 communications.
- Needs a CA-DP9RJ45 conversion adapter for serial links.
- Supports label printers for clear unit tagging.
- Fits systems that use DeviceNet fieldbus control.
- Pairs with a PC running the HORIBA STEC configuration software.
Certifications and Standards
- Power supply follows ODVA standards.
- Digital link uses the DeviceNet protocol.
- Leak test uses helium to confirm a tight seal.
- Ask your HORIBA STEC representative for the full certificate list.
Packing List
- One SEF-Z514KX mass flow meter or SEC-Z514KX controller
- Configuration software
- Communications converter (serial)
- Conversion adapter (CA-DP9RJ45)
- RS232C cable and LAN cable
- USB serial converter (for PCs without a serial port)
- Label printer kit (optional)
FAQ
- Q: Can one unit handle more than one gas?
Yes. The software lets you set multiple gas types and ranges. - Q: How do I check the flow with nitrogen?
Use the built-in N2 conversion mode during receipt inspection. - Q: What if my PC has no serial port?
Add a USB serial converter. HORIBA STEC lists it as an accessory. - Q: Which Windows versions work?
Windows 2000, XP and Vista, in English or Japanese. - Q: How fast does it respond?
It reaches full range in 1 second or less. - Q: Can I mount it sideways?
Yes. The unit mounts in any orientation. - Q: From experience, what setup mistake is common?
Teams often skip the seminar, then mislabel MR/MG numbers. Book training first. - Q: What tends to cause drift in daily use?
Dirty gas lines are a frequent cause. Keep filters fresh and check leak tightness. - Q: Is a normally open or closed valve better?
Pick normally closed for safety on shutdown. Choose open only when flow must continue.














There are no reviews yet.