Product details
Product Overview
- TM0180-07-00-04-10-02 from ProvibTech
- Standard 8mm probe, M10×1 thread, no armor
- Rugged cable jacket resists corrosion and tearing
- Protective rubber boot covers connectors
- For harsh environments and hazardous areas
- Reverse mount option available for TM0393 housings
Key Technical Data
- Brand: ProvibTech
- Model: TM0180-07-00-04-10-02
- Type: Standard 8mm Proximity Probe
- Measurement range: 0.25 – 2.25 mm (10 – 90 mils)
- Linear range start: 0.25 mm (10 mils) from probe face
- Sensitivity: 7.87 mV/µm (200 mV/mil)
- Linearity: ±0.0254 mm (±1.0 mil) system calibrated
- Frequency response: 0 – 10.0 kHz (±3 dB)
- Minimum target size: 15 mm (0.6 in) diameter
- Supply voltage: -23 to -30 VDC
- Current: < 12 mA
- Probe temp (op/storage): -40 °C to +177 °C
- Driver temp (operation): -40 °C to +80 °C
- Driver temp (storage): -50 °C to +100 °C
- Temp sensitivity (mid-range): ±0.3 %/°C
- At 2.25 mm (90 mil): ±0.5 %/°C nominal
Environmental & Hazardous Approvals
- ATEX: II 1 G, EEx ia IIC T4 (Ta -40 to +80 °C)
- ATEX probe/cable: II1G Exia IICT4 (Ta -55 to +115 °C), II2G Exia IICT2 (Ta -55 to +232 °C)
- CSA: Intrinsically safe, Class I Div 1 Grps ABCD, T4
- CSA Zone: Class I Zone 0 Ex ia IIC T4
- PCEC: Ex ia IIC T4
- GOST R: 0ExiallCT4
- Non-incendive for Class I Div 2 Grps ABCD
Installation & Compatibility
- Standard 8mm probe, M10×1 thread, without armor
- Unthreaded length: 0 mm; case length: 40 mm
- Total length: 1.0 m; connector included
- Choose English or metric units
- Reverse mount for hazardous area housings (TM0393)
- Compatible with 5 m and 9 m integrated probe+extension
Maintenance & Serviceability
- Rugged cable jacket prevents breakage and tearing
- Rubber boot stops oil and dirt ingress
- Easy connector access for quick checks
- No special tools needed for routine inspection
What’s in the Box & Warranty
- 1 × TM0180 probe assembly with 1.0 m cable
- 1 × protective rubber boot
- Installation guide (digital copy)
- Warranty: 12 months from shipment date
- Shipping: 12–24 hours dispatch via FedEx, UPS, or DHL
Expert Review
- “ProvibTech’s TM0180 delivers reliable, repeatable readings in tough conditions. The rugged jacket and boot add real durability, while the wide temp range and ATEX/CSA approvals make it a top choice for critical machinery monitoring.”
Manager’s Insight
- “For plant managers, this probe reduces unplanned downtime. Its linearity and frequency response cover most rotating equipment needs. The quick dispatch and global shipping keep your projects on schedule.”
Applications & Suitable Equipment
- Steam and gas turbines
- Compressors and pumps
- Fans, blowers, and motors
- Gearboxes and paper mills
- Hazardous area installations (Zone 0/1, Div 1/2)
- Vibration and position monitoring systems
FAQ – Frequently Asked Questions
- What is the linear range of this probe?
- 2.0 mm (80 mils) starting at 0.25 mm (10 mils) from face.
- Can I use this probe in a Zone 0 area?
- Yes, it has CSA Zone 0 and ATEX Zone 0 approvals.
- What cable lengths are available?
- Standard 0.5 m, 1.0 m, and special 5.0 m, 9.0 m integrated.
- Is the connector protected against oil?
- Yes, the rubber boot covers connectors to block oil and dirt.
- Do I need a separate driver?
- No, the driver is integrated; supply -23 to -30 VDC.
- What is the typical linearity error?
- ±0.038 mm (±1.5 mil) including interchangeability.
Selection Guide (experience-based)
- For high-temp environments (up to 177 °C), choose this standard probe.
- If your target is smaller than 15 mm, consider a different model.
- For long cable runs, select the 5.0 m or 9.0 m integrated version.
- Reverse mount option is mandatory for TM0393 housings in hazardous zones.
- Always verify the target material (AISI4140 used for calibration).
Ordering & Contact
- For inquiries: sales@powergearx.com
- WhatsApp: +86 18030005825
- Model to order: TM0180-07-00-04-10-02
Copyright © 2026 Powergear X Automation Limited. All rights reserved.
Original Source: https://www.powergearx.com/
There are no reviews yet.