Product details
MDX91A-1490-503-4-T00 | SEW-EURODRIVE MOVIDRIVE Modular Multi-Axis Inverter
MDX91A-1490-503-4-T00 is a book-style multi-axis inverter from SEW-EURODRIVE. Moreover, it belongs to the MOVIDRIVE modular MDX91A series. The unit delivers 149.0 A rated output at 4 kHz PWM. In addition, it connects directly to a 3-phase AC line. Frame size 6 supports 4-quadrant operation. An integrated DC 24 V auxiliary supply delivers 80 W. You can also add an external supply if needed. Therefore, the drive suits demanding multi-axis cabinets in industrial automation.
Technical Data
Core identity
- Brand: SEW-EURODRIVE
- Model: MDX91A-1490-503-4-T00
- Series: MOVIDRIVE modular Multi-Axis Inverter (MDX91A)
- Module type: Book-style control-cabinet application inverter
- Frame size: 6
- Operation: 4-quadrant
Electrical performance
- Supply voltage: 3 x AC 380-500 V nominal, 50-60 Hz
- Line frequency tolerance: 50-60 Hz ±5%
- Nominal line current: 134.0 A
- Rated output current: 149.0 A at f_PWM = 4 kHz
- Recommended motor power ASM: 75 kW
- Apparent output power S_N: 92.7 kVA
- Overload capacity: 200% of I_N for 3 s at 4 kHz PWM
- Continuous current at 0 Hz: I_N x 0.9
- Nominal DC link voltage: DC 560 V
- PWM frequency: 4, 8, 16 kHz adjustable
- Max output frequency: U/f 599 Hz; VFCplus 250 Hz; CFC 500 Hz; ELSM 500 Hz
- Power section nominal loss: 1332 W
Control and braking
- Control modes: U/f, VFCplus, CFC, ELSM
- Integrated brake chopper: Yes
- Brake chopper continuous power: 92.7 kW
- Brake chopper peak power: 200% x S_N
- Optional braking resistor: BR..
- Minimum braking resistance R_BRmin: See braking resistor selection table
Communication and compatibility
- Built-in system bus: EtherCAT / CiA402
- Fieldbus options: /CFN21A PROFINET IO, /DFE32B EtherNet/IP, /DFI11B PROFIBUS DPV1
- Expansion cards: /CES11A multi-encoder, /CID21A encoder interface, /CIO21A I/O expansion, /CS..A MOVISAFE safety card, /L conformal coating
- Platform fit: MOVI-C platform, MOVIDRIVE system and MOVIDRIVE technology
Environmental tolerance
- Operating temperature: 0 to +40 °C without derating; +40 to +60 °C with derating
- Storage temperature: -25 to +70 °C, class 1K2, non-condensing
- Transport temperature: -25 to +70 °C, class 2K3, non-condensing
- Relative humidity: Non-condensing, class 3K3
- Protection rating: IP10; optional IP20 with plastic terminal covers
- Pollution class: 2 (IEC 60664-1); overvoltage category III
- Installation altitude: Up to 1000 m without restriction; 1000-3800 m with 1% I_N derating per 100 m
- EMC: Basic interference suppression integrated
Physical data
- Weight: 24.1 kg
- Dimensions: Published as dimension drawings per size; see manual section 2.7
- Line and motor terminals: M10 copper busbars
Installation Guide
- First, mount the book-style unit vertically in a control cabinet.
- Then keep the specified clearances for airflow.
- Next, connect the 3-phase line to the M10 copper busbars.
- After that, connect the motor to the M10 busbars with correct torque.
- Use the integrated DC 24 V supply or add an external one.
- Also fit the optional braking resistor BR.. when needed.
- Moreover, add plastic terminal covers to reach IP20.
- In addition, follow the EMC rules in the official manual.
- Furthermore, check the altitude derating above 1000 m.
- Finally, verify the DC link voltage before power-up.
Commissioning and Maintenance
- First, set the control mode: U/f, VFCplus, CFC, or ELSM.
- Then match the PWM frequency to the load: 4, 8, or 16 kHz.
- Next, configure the EtherCAT CiA402 system bus first.
- After that, add fieldbus cards for PROFINET, EtherNet/IP, or PROFIBUS.
- Also use MOVISAFE cards for safety functions.
- Moreover, check the brake chopper settings during setup.
- In addition, keep the cabinet temperature within the derating curve.
- Furthermore, clean the heatsink and check the fans on a schedule.
- Then inspect the M10 busbar torque at each service.
- Finally, keep spare option cards for fast swaps.
Compatibility Notes
- First, this model works inside the MOVI-C platform and the MOVIDRIVE system.
- Also, it supports EtherCAT / CiA402 out of the box.
- Moreover, it accepts /CFN21A, /DFE32B, and /DFI11B fieldbus cards.
- In addition, it accepts /CES11A, /CID21A, /CIO21A, and /CS..A cards.
- Furthermore, it fits 3 x AC 380-500 V supplies at 50-60 Hz.
- Then it matches 75 kW ASM motors as a recommended pairing.
- Likewise, it pairs with BR.. braking resistors.
- Finally, it uses standard M10 copper busbar connections.
Certifications and Standards
- First, pollution class 2 per IEC 60664-1 applies.
- Also, overvoltage category III applies.
- Moreover, storage class 1K2 per EN 60721-3-1 applies.
- In addition, transport class 2K3 per EN 60721-3-2 applies.
- Furthermore, humidity class 3K3 per EN 60721-3-3 applies.
- Then basic EMC interference suppression is built in.
- Finally, check the product manual for the full approval list.
Packing List
- First, 1 x MDX91A-1490-503-4-T00 inverter unit.
- Also, 1 x product manual reference sheet.
- Moreover, 1 x terminal cover set, if ordered.
- In addition, option cards, if ordered.
- Finally, braking resistor BR.., if ordered.
FAQ
What is the rated output current of this inverter?
It delivers 149.0 A at 4 kHz PWM.
Which control modes does the MDX91A support?
It runs U/f, VFCplus, CFC, and ELSM modes.
Can I connect this drive to EtherCAT?
Yes. EtherCAT / CiA402 is built into the system bus.
How much overload can the unit handle?
It handles 200% of I_N for 3 s at 4 kHz PWM.
What is the operating temperature range?
It runs from 0 to +40 °C without derating. Above +40 °C, derating applies.
Does the drive include a brake chopper?
Yes. The brake chopper is integrated. Add a BR.. resistor for braking energy.
What experience shows up in real cabinets?
Book-style mounting saves cabinet width. However, keep airflow clear. Also check busbar torque at each service.
Which fieldbus cards fit this model?
The /CFN21A, /DFE32B, and /DFI11B cards fit.
How do I reach IP20 protection?
Add the optional plastic terminal covers.
What happens at high installation altitude?
Above 1000 m, I_N drops 1% per 100 m, up to 3800 m.
















There are no reviews yet.