Product details
OP-87527 Keyence Control Cable – NFPA79 Compatible, 2 m, D-Sub 9-pin
OP-87527 from Keyence is a rugged control cable built for industrial automation. It meets NFPA79 standards. The cable comes with a D-Sub 9-pin connector. Its length is 2 meters. This cable connects sensors, controllers, and I/O modules with high reliability.
- Key Benefit: Flame retardant and oil resistant for harsh factory floors.
- Key Benefit: Shielded design blocks electrical noise.
- Key Benefit: Ready to use with standard 9-pin D-Sub interfaces.
Technical Specifications
- Brand: Keyence
- Model: OP-87527
- Product Type: Control Cable (NFPA79 Compatible)
- Connector: D-Sub 9-pin
- Length: 2 m
- Measurement Range: Not applicable (passive cable)
- Frequency Response: Up to 1 MHz (typical for control signals)
- Sensitivity: Not applicable
- Linearity: Not applicable
- Resolution: Not applicable
- Temperature Range: -20°C to +80°C
- Environmental Resistance: Oil, moisture, and flame resistant
- Noise Immunity: Shielded against EMI/RFI
Installation Guide
- Align the D-Sub 9-pin connector with the port.
- Tighten the screws by hand. Do not overforce.
- Keep cable away from motors and high-voltage lines.
- Use cable ties to fix the cable every 30 cm.
- Check NFPA79 routing rules for your machine.
Debugging and Maintenance
- Inspect connector pins monthly for dust or corrosion.
- Replace cable if the jacket shows cracks or cuts.
- Test continuity with a multimeter if signal drops.
- Clean with a dry cloth only. No solvents.
Compatibility Notes
- Works with Keyence controllers that have a 9-pin D-Sub port.
- Compatible with other brands using standard RS-232 or control I/O.
- Meets NFPA79 for industrial machinery wiring.
- Not for use in high-flex robotic joints.
Certifications
- NFPA79 compliant
- RoHS compliant
- CE marked
Package List
- 1 x OP-87527 Control Cable (2 m)
- 1 x D-Sub 9-pin connector (pre-installed)
- 1 x Quick start guide
Warranty and Shipping
- Warranty: 12 months
- Dispatch: Within 12–24 hours
- Carriers: FedEx, UPS, DHL
- Tracking number provided after shipment.
Expert Review
Manager’s Insight: The OP-87527 solves a common pain point: noisy signals in tight cabinets. Its shield and NFPA79 jacket make it a safe pick for North American factories. For machine builders, this cable reduces downtime from electrical interference. I recommend it for fixed installations, not continuous flexing. The 2 m length fits most panel-to-door runs.
Best Fit Equipment and Applications
- Keyence CV / XG series vision controllers
- PLC I/O modules with D-Sub 9-pin ports
- Industrial sensors and actuators
- Panel builders and control cabinet wiring
- Packaging, automotive, and electronics assembly lines
FAQ
Q: Can I use this cable for RS-232 communication?
A: Yes. The D-Sub 9-pin layout fits standard RS-232 pinouts. But verify your device pin map first.
Q: What makes NFPA79 compatibility important?
A: NFPA79 covers industrial machinery wiring. It ensures flame resistance and safe routing. Many plants require it for insurance and audits.
Q: How do I choose the right control cable for my machine?
A: Check three things: connector type, cable length, and noise level. For high noise, always pick a shielded cable like this one. For moving parts, choose a high-flex model instead.
Q: Is the OP-87527 ready for immediate use?
A: Yes. The cable comes with pre-installed D-Sub 9-pin connectors. Just plug and tighten.
Q: What if the cable gets damaged after one year?
A: The 12-month warranty covers defects. Physical damage from misuse is not covered. Contact us for a replacement quote.
Contact Information
- Inquiries: sales@powergearx.com
- WhatsApp: +86 18030005825
- Response time: 12–24 hours
Copyright © 2026 Powergear X Automation Limited. All rights reserved.
Original Source: https://www.powergearx.com/
There are no reviews yet.