Over 50,000 hot-selling automation module components.

FCST1005MZF-HT Fujikin Heated MGMR Mass Flow Controller

0 Reviews
In stock
  • 100% genuine products in stock with fast delivery.
  • 30-day return policy for quality assurance.
  • 12-month warranty for peace of mind.
SKU: FCST1005MZF-HT
Brands:

Product details

FCST1005MZF-HT Heated MGMR Mass Flow Controller

  • Brand: Fujikin
    • Series: FCST T1000 Series
      • Type: FCS-T1000MZF-HT High Temperature MGMR
      • Model: FCST1005MZF-HT
  • What it does: heats the flow path and runs many gases
    • Heated body keeps condensable gas flowing
    • MGMR cuts spare part count

Why This Model Stands Out

  • Heated flow path runs from 50°C to 80°C
    • Stops vapor from condensing in the line
    • You can set a custom calibration temperature
  • Multi-gas, multi-range design
    • One unit covers 10-3,000 SCCM (N2)
    • Bins 1-5 give wide coverage
  • Hastelloy C sensor for harsh gas
    • Handles halogen and corrosive media
    • Metal seal blocks leaks

Technical Data

  • Flow range: 10-3,000 SCCM (N2 equivalent, Bin 1-5)
  • Accuracy: ±1% S.P. (25-100% set point)
    • ±0.25% FS from 2% to 25%
  • Repeatability: ±0.2% FS
  • Response time: 1 second or less
  • Control range: 2-100% FS turndown
  • Max pressure: 400 kPaG
    • 500 kPaG for Ar
  • Wetted parts: SUS316L steel, Hastelloy C sensor, PCTFE seats
  • Seal: metal (Au gasket)
  • Leak rate: 1×10⁻¹¹ Pa·m³/s He or better
  • Valve: bellows-sealed metal diaphragm, N/O or N/C
  • Electronics: 0-5 VDC analog, 4-20 mA, RS-485
    • Remote electronics option
  • Power: ±15 VDC (analog) or +24 VDC
  • Size: 125 (H) × 124 (W) × 70 (D) mm
  • Finish: EP surface option

Where It Fits Best

  • Heated gas lines for liquefied sources
    • CVD with liquid precursors
    • Etch tools that use condensable gas
  • Halogen and corrosive gas handling
    • Hastelloy sensor resists attack
    • Metal seal keeps the line tight
  • Tools that swap gas recipes often
    • MGMR lowers spare part stock
    • Fewer part numbers to track

Installation Tips

  • Mount on a firm base
    • Keep the 70 mm depth in mind
  • Warm the unit to your set temperature first
  • Match power to the control choice
    • ±15 VDC for 0-5 VDC
    • +24 VDC for 4-20 mA
  • Keep inlet pressure under 400 kPaG
    • 500 kPaG for Ar only

Setup and Care

  • Zero the unit after it reaches heat
  • Use RS-485 for simple digital control
  • Pick remote electronics for tight spaces
  • Check the Au gasket at each service
  • Keep calibration at your set temperature

Certifications

  • CE marked
  • RoHS compliant
  • EP surface finish available

Packing List

  • One FCST1005MZF-HT heated controller
  • One calibration report
  • One quick start guide
  • Fitting hardware per order
  • Protective port caps

FAQ

  • Which tools suit this heated MGMR unit?
    CVD and etch tools with liquid sources fit well. Gas cabinets that feed halogens also work.
  • Why heat the flow path?
    Heat stops vapor from condensing. It keeps low-pressure gas moving.
  • How do I cut spare part stock?
    Let one MGMR unit cover many gases and ranges. Fewer part numbers follow.
  • What should I check when readings look odd?
    Confirm the unit reached its set heat. Then check inlet pressure.
  • Can I move the electronics away from the body?
    Yes. The remote electronics option helps in crowded gas cabinets.

Specifications

  • BrandAllen-Bradley
  • Part Number22A-B012F104
  • ConditionOriginal Brand New

Customers Reviews

There are no reviews yet.

Be the first to review “FCST1005MZF-HT Fujikin Heated MGMR Mass Flow Controller”

Your email address will not be published. Required fields are marked *

Back to Top
Product has been added to your cart