F5-BA0101B Flexem F5 Series Analog Expansion Board 0-10V/4-20mA High Accuracy

Product Introduction

Flexem F5-BA0101B is an analog expansion board. It mounts on the CPU front slot. This module provides 1 input and 1 output. It handles voltage and current signals. Use it to read sensors or control actuators. The board draws power internally from the PLC. No external supply is required. Its small size fits tight panels. Perfect for precise industrial analog control.

Key Technical Data

• Brand: Flexem
  • Model: F5-BA0101B
    • Type: Analog expansion board
      • Channels: 1 input, 1 output
        • Resolution: 12-bit
          • Input signal range: Voltage 0-10V, Current 0-20mA / 4-20mA
            • Output signal range: Same as input
            • Full range digital value: 0 to 4096
        • Conversion precision: ±1% of full range
        • Max input limits: Voltage 30V, Current 30mA
          • Input impedance: Voltage mode >100k ohms
          • Input impedance: Current mode <250 ohms ±5%
        • Output load range: Voltage mode >2k ohms, Current mode <500 ohms
        • Power supply: 5 VDC -15%/+20% (from CPU)
          • Max consumption: 3.2W
        • Wiring: Non-removable terminal block
        • Temperature range: -10 to 60°C (operating), -20 to 70°C (storage)
        • Humidity: 5% to 95% RH, non-condensing
        • Installation: CPU front expansion board slot
        • Dimensions: 38mm x 40mm x 18mm

Performance & Environment Details

• Measurement range: 0-10V, 0-20mA, 4-20mA
• Resolution: 12-bit (4096 steps)
• Linearity error: < ±1% full scale
• Temperature drift: < 0.05% per °C
• Immunity: High noise rejection, ESD protected
• Environment: -10 to 60°C, 5-95% humidity

Installation & Wiring Guide

• Mounting: Plug directly into CPU front slot
  • Step 1: Power off PLC
  • Step 2: Align board with guides
  • Step 3: Press firmly until seated
• Wiring connections:
  • Input: V/I+, COM, shield (if used)
  • Output: V/I+, COM, shield
  • Cable: Shielded twisted pair recommended
• Configuration: Set via PLC programming software

Maintenance & Diagnostics

• Maintenance: No calibration needed. Keep clean and dry.
• Diagnostics: Software monitors input/output status
  • Check: Overrange, underrange, wire break (4-20mA)
  • LED: Power/active indicator on CPU
• Troubleshooting: Verify wiring, signal range, and impedance

Compatibility & Certifications

• Compatible CPUs: Flexem F5 series with expansion slot
  • Models: All F5-CPU variants
• Certifications:
  • CE: EN 61000-6-2, EN 61000-6-4
  • RoHS: Compliant (2011/65/EU)

Package Contents

• 1x Flexem F5-BA0101B analog expansion board
• 1x Quick installation guide
• 1x Warranty card (12 months)

Warranty & Shipping

• Warranty period: 12 months from purchase
  • Covers: Manufacturing defects
  • Not covered: Misuse, tampering
• Shipping methods: FedEx, UPS, DHL
  • Tracking: Provided within 24 hours
  • Delivery: 2-5 business days

Application Scenarios

• Process control: Read pressure sensors, control valves
• HVAC: Monitor temperature, adjust dampers
• Machine automation: Analog feedback from drives
• Energy management: Measure current from transducers

Professional FAQs

• How do I select voltage or current mode on this F5-BA0101B module?You select the mode via PLC software. Wire accordingly. For voltage, use V and COM. For current, use I and COM. Do not connect both.
• What happens if I exceed 30V on the analog input of my F5-BA0101B?The board may be damaged. The maximum limit is 30V. Always stay within 0-10V range for accurate readings.
• My 4-20mA sensor reads zero. What should I check on this expansion board?First, check wiring and sensor power. Then verify the input mode is set to current. Use PLC diagnostics to see if value is near 0 or 4096.
• Can I use this F5-BA0101B with a 2-wire 4-20mA transmitter?Yes. Connect transmitter positive to +24V, negative to input I. Ensure loop power is supplied externally. The board measures current.
• How do I know if the analog output is working correctly on my F5-BA0101B?Use a multimeter to measure output at terminals. Compare with PLC set value. Check load resistance: >2k ohms for voltage, <500 ohms for current.
• What is the 12-month warranty coverage for this Flexem F5-BA0101B?It covers defects in materials and workmanship. Contact us with proof of purchase. We repair or replace free.
• Which shipping carriers do you use for the F5-BA0101B?We ship via FedEx, UPS, and DHL worldwide. Tracking is emailed to you. Delivery takes 2-5 days.

Selection Guidance

• Choose F5-BA0101B if: You need one analog input and one output. Perfect for basic control loops.
  • Ideal for: Small machines, simple PID control
• Need more channels? Consider F5-BA0402B for 4 inputs, 2 outputs.
  • Need isolation? Look at isolated analog modules.
• Unsure? Email our support for quick advice.

Contact Information

• Email: sales@powergearx.com
• WhatsApp: +86 18030005825
• Website: www.powergearx.com

Copyright © 2026 Powergear X Automation Limited. All rights reserved.
Original Source: https://www.powergearx.com/