EVS9330-ET Lenze 9300 Servo Inverter 45 kW Servo PLC Drive

EVS9330-ET Lenze Global Drive 9300 Servo Inverter – 45 kW Servo PLC

EVS9330-ET is a Lenze Global Drive 9300 Servo Inverter with Servo PLC technology. It delivers 45.0 kW rated motor power and 89.0 A rated output current. The unit uses field-oriented servo control for synchronous and asynchronous motors. It suits demanding motion tasks in industrial automation.

This drive combines servo performance with PLC logic in one built-in unit. The push-through design saves cabinet space. Built-in CANopen and an AIF slot make system integration easy. The EVS9330-ET is a proven legacy model. Lenze confirms a migration path to the i950 series.

Core Highlights

• 45 kW rated power for heavy motion loads
• 89.0 A nominal output at 8 kHz switching
• 133.5 A maximum output for 150% overload
• Servo PLC logic built in
• CANopen system bus on board
• IP20 protection for cabinet mounting

Technical Specifications

Brand and Model

• Brand: Lenze
• Model: EVS9330-ET
• Series: Global Drive 9300 Servo Inverters
• Type: Servo inverter with Servo PLC technology
• Design: Built-in and push-through

Power Data

• Rated motor power: 45.0 kW (4-pole asynchronous motor, 400 V)
• Rated output current: 89.0 A nominal at 8 kHz
• Maximum output current: 133.5 A at 8 kHz (150% overload mode)
• Power loss at 400 V: 1100 W

Control and Memory

• Control mode: Field-oriented servo control (SC)
• Motor support: Synchronous and asynchronous servo motors, standard asynchronous motors
• Program memory: 655 kByte flash (Servo PLC variants)
• Resolution and accuracy: Analog inputs 11 bits plus sign; analog outputs 9 bits plus sign
• Sensitivity: Stable response at +/-10 V analog reference
• Linearity: Consistent analog signal scaling across full range

Inputs and Outputs

• Analog inputs: 2, +/-10 V (switchable 0…20 mA), 11 bits plus sign
• Analog outputs: 2, 9 bits plus sign
• Digital inputs: 6 (1 controller enable + 5 freely assignable), PLC level per IEC 61131-2
• Digital outputs: 4, 50 mA per output
• Resolver input: Sub-D 9-pin
• Encoder input: Multi-encoder input for TTL/SinCos incremental encoders and Hiperface absolute encoders
• Digital frequency input/output: Two-track each, Sub-D 9-pin

Communication

• Built-in ports: CAN system bus (X4), AIF automation interface (X1) for keypad or communication module
• Protocols: CANopen (integrated system bus)
• Expansion modules: PROFIBUS DP (EMF2133IB), DeviceNet (EMF2179IB), INTERBUS (EMF2113IB), LECOM A/B (EMF2102IB)

Electrical Data

• Supply voltage: 3/PE AC 320…528 V nominal, 45…65 Hz
• DC supply: DC 460…740 V (per official rated-data table)

Environmental Range

• Operating temperature: 0…+50 °C ambient (sizes 9327-9332, 15-75 kW)
• Derating: 2.5%/°C above +40 °C output-current derating
• Storage temperature: -25…+55 °C
• Relative humidity: Average 85% RH, without condensation (climatic class 3K3 per EN 50178)
• Protection rating: IP20
• Noise immunity: Designed for industrial cabinet environments; verify EMC plan at installation

Physical Data

• Dimensions (H×W×D): 591×340×285 mm
• Weight: 36.5 kg

Installation Guide

• Mount the drive vertically in a clean cabinet.
• Keep the push-through airflow path open.
• Respect IP20 limits; avoid dust and moisture.
• Use shielded motor cables for EMC control.
• Connect the resolver or encoder to the Sub-D ports.
• Wire the CANopen bus to X4 with proper termination.
• Check supply voltage: 320…528 V AC or 460…740 V DC.
• Derate output above +40 °C ambient.

Commissioning and Maintenance

• Set motor data in the Servo PLC program.
• Run auto-tuning for field-oriented control.
• Use the AIF keypad for local setup.
• Back up the 655 kByte flash program.
• Clean cooling paths at planned intervals.
• Check fan and filter condition regularly.
• Verify overload history in the drive log.

Compatibility Notes

• Works with synchronous and asynchronous servo motors.
• Supports standard asynchronous motors.
• Fits PROFIBUS DP, DeviceNet, INTERBUS, and LECOM A/B modules.
• Uses CANopen on the built-in system bus.
• Lenze offers a migration path to the i950 drive.
• The i950 copies 9300 servo behavior via a compatibility switch.
• No drop-in replacement with the same order code exists.

Certification and Compliance

• Built to IEC 61131-2 PLC input levels.
• Climatic class 3K3 per EN 50178.
• Not UL-approved for this size range.
• Legacy status listed on the official Lenze previous-products page.

Packing List

• 1 x EVS9330-ET servo inverter
• 1 x product documentation set
• 1 x connector kit as supplied
• 1 x protective packaging

Warranty and Shipping

• Warranty: 12 months
• Dispatch time: 12-24 hours
• Couriers: FedEx, UPS, DHL
• Order help: sales@powergearx.com
• WhatsApp: +86 18030005825

Manager’s Insight

The EVS9330-ET is a practical choice for plants that already run the 9300 family. It keeps spare-part coverage simple. Buyers should plan the i950 migration early for new projects. This drive offers strong overload headroom and proven Servo PLC control.

Expert Review

The 133.5 A peak current and 655 kByte program memory give this unit real capability. Field-oriented control stays stable on both servo and standard motors. The main limit is its legacy lifecycle. Engineers who need long-term new-build supply should compare the i950 path first.

Best Fit Applications

• Packaging machines with servo axes
• Material handling and conveyor systems
• Textile and printing lines
• Machine tools with field-oriented control
• Retrofit projects for existing 9300 cabinets
• Spare-part stock for 15-75 kW drive systems

FAQ

Q: What is the rated power of the EVS9330-ET?

A: It delivers 45.0 kW with a 4-pole asynchronous motor at 400 V.

Q: Can this drive run a standard asynchronous motor?

A: Yes. Field-oriented servo control supports both servo and standard asynchronous motors.

Q: Does the unit include CANopen?

A: Yes. CANopen runs on the integrated system bus at port X4.

Q: How much overload current can it supply?

A: It reaches 133.5 A, which is 150% of nominal, in overload mode.

Q: What is the delivery time?

A: We dispatch within 12-24 hours by FedEx, UPS, or DHL.

Q: Is the EVS9330-ET still a current model?

A: No. Lenze lists it as a previous product with an i950 migration path.

Q: Is it UL-approved?

A: No. This size range is not UL-approved according to the official catalogue.

Q: How do I choose between a spare EVS9330-ET and a new i950?

A: Pick the EVS9330-ET for existing 9300 cabinets. Choose the i950 for new builds with long-term support needs. Check the compatibility switch and PROFIBUS module first.

Q: What should I check before ordering a replacement?

A: Confirm the motor type, encoder interface, bus module, and cabinet airflow. Match the order code and size to avoid fit issues.

Q: Can I get help with module selection?

A: Yes. Contact sales@powergearx.com or +86 18030005825 on WhatsApp.

Buying Guide

• Match the drive to your motor power and current.
• Check the encoder type before purchase.
• Choose the right AIF module for your fieldbus.
• Plan cabinet cooling for 1100 W power loss.
• Keep a spare unit for critical 9300 lines.
• Ask about the i950 path for new projects.

Contact us: sales@powergearx.com or +86 18030005825 for stock, lead time, and technical fit.

Copyright © 2026 Powergear X Automation Limited. All rights reserved.

Original Source: https://www.powergearx.com/