EVS9323-CKV003 Lenze 9300 Servo Inverter, Cam Profiler Deal

EVS9323-CKV003 Lenze 9300 Servo Inverter: Compact Cam Control

This is the EVS9323-CKV003. It is a servo inverter from the Lenze Global Drive 9300 servo line. The unit is a cam profiler in a cold-plate design. Software variant V003 handles the motion work. Power reaches 1.5 kW. Rated current sits at 3.9 A. Peak current hits 5.9 A in overload mode. Field-oriented servo control drives synchronous and asynchronous servo motors. A flat rear plate moves heat into a cabinet wall. This is a legacy model. Lenze keeps a previous-products page. Newer drives replace it. A migration path to the i950 exists. Last checked: 2026-10. Status: DERIVED_CROSS_REF.

Technical Data

• Brand: Lenze
  • Model: EVS9323-CKV003
    • Series: Global Drive 9300 Servo Inverters
      • Type: Cam profiler, cold-plate design
        • Software: variant V003
          • Size: 9323 frame class
• Rated motor power: 1.5 kW, 4-pole async motor, 400 V
  • Rated current: 3.9 A at 8 kHz
    • Peak current: 5.9 A at 8 kHz
      • Overload: 150% of In in overload mode
• Control: field-oriented servo control (SC)
  • Motor types: sync servo, async servo, standard async
• Analog inputs: 2, ±10 V, switchable 0 to 20 mA
  • Resolution: 11 bits plus sign
  • Analog outputs: 2, 9 bits plus sign
• Digital inputs: 6 total
  • One: controller enable
  • Five: freely assignable
  • Level: PLC per IEC 61131-2
• Digital outputs: 4, 50 mA each
• Feedback ports: resolver on Sub-D 9-pin
  • Encoder input: multi-encoder for TTL and SinCos incremental
    • Also: Hiperface absolute encoders
  • Frequency I/O: two-track each, Sub-D 9-pin
• Built-in ports: CAN system bus on X4
  • AIF port: X1 for keypad or module
    • Protocol: CANopen on the system bus
• Module options: PROFIBUS DP EMF2133IB, DeviceNet EMF2179IB, INTERBUS EMF2113IB, LECOM A/B EMF2102IB
• Supply: 3/PE AC 320 to 528 V, 45 to 65 Hz
  • DC option: 460 to 740 V DC
• Heat loss at 400 V: 140 W
• Operating heat: 0 to +55 °C for sizes 9321-9326
  • Derating: 2.5% per °C above +40 °C
  • UL note: not UL-approved
• Storage: -25 to +55 °C
• Humidity: 85% RH average, no condensation
  • Climatic class: 3K3 per EN 50178
• Protection: IP20
• Size (H×W×D): 350 × 97 × 158 mm
  • Cooling: flat rear plate
  • Weight: not published for this variant

Install Steps

• Flat-mount the rear plate on a clean metal surface.
• Use heat paste or a pad. Air gaps kill cold-plate cooling.
• Feed 3/PE AC 320 to 528 V. Match 45 to 65 Hz.
• Plug the resolver or encoder into its Sub-D port.
• Link CAN on X4. Add a fieldbus module to X1 if needed.
• Keep the 140 W loss in mind. Check wall temperature.

Setup and Care

• Load the cam program for variant V003 first.
• Set motor data before the first enable. Wrong data means bad motion.
• Check encoder feedback direction. Swap wires if speed runs backward.
• Watch wall heat at each service stop. Reapply paste on refit.
• Clean the plate face. Dust blocks heat flow.
• Store spares between -25 and +55 °C in a dry spot.

Compatibility Notes

• Runs 1.5 kW motors at 400 V
• Takes TTL and SinCos incremental encoders
• Takes Hiperface absolute encoders
• Takes a resolver on the Sub-D 9-pin port
• Migrates to the i950 through a compatibility switch, PROFIBUS module and L_ICIP library
• No drop-in same-code replacement exists

Approvals and Notes

• Climatic class 3K3 per EN 50178
• IP20 rating
• Not UL-approved
• Audit status: DERIVED_CROSS_REF, checked 2026-10

In the Box and Cover

• 1 × Lenze EVS9323-CKV003 servo inverter
• 1 × official documentation set
• 12-month warranty
• Ships in 12 to 24 hours
• FedEx, UPS or DHL delivery

Expert Review

The EVS9323-CKV003 is a smart pick for tight panels. The cold plate removes the need for open air vents. That suits sealed cabinets. Cam profiling in software variant V003 saves a separate motion card. Field-oriented servo control keeps speed and torque tight. The 5.9 A peak covers short overload bursts. Two cautions stand out. The unit is not UL-approved. The cold plate needs good wall contact, or heat builds fast. Legacy status means buy spares early. For small cam axes, it still works well.

Manager’s Insight

This drive fits a narrow job, and it fits it well. The 1.5 kW class covers small axes. The cold-plate body saves cabinet depth. The AIF slot keeps bus choice open. CANopen on X4 links axes without extra parts. The Hiperface port allows absolute feedback, so homing steps drop away. My advice: check wall contact and heat first. Then order. Stock leaves in 12 to 24 hours. Write to sales@powergearx.com or message +86 18030005825 on WhatsApp.

Best-Fit Equipment and Scenes

• Cam-driven packaging machines
• Small rotary index tables
• Labeling and feeding axes
• Sealed cabinets with no vent path
• Multi-axis lines linked on CANopen
• Legacy 9300 servo panels due for a planned swap

FAQ

• What makes the cold-plate version different?
  • It has no open air vents. Heat leaves through a flat rear plate. You bolt that plate to a metal wall.
• Can this unit read an absolute encoder?
  • Yes. The multi-encoder port takes Hiperface absolute encoders. That cuts homing time on startup.
• How does the 12-month warranty work?
  • Cover runs 12 months from delivery. Keep the invoice. Send photos and the serial label with any fault report.
• What shipping choices do I have?
  • We pack and send within 12 to 24 hours. FedEx, UPS and DHL carry the goods. Tracking follows by email.
• From experience, what should a first buyer watch?
  • Wall contact and UL rules. Bad plate contact traps heat. Also confirm the not-UL-approved note fits your site.

Buying Guide

• Check the motor first. Confirm 1.5 kW at 400 V.
• Stay inside 320 to 528 V AC or 460 to 740 V DC.
• Pick your feedback type before you order.
• Confirm the panel wall is flat and clean.
• Plan for 140 W of heat on the wall.
• Note the legacy status and UL limit. Keep one spare on site.
• Need help? Email sales@powergearx.com or call +86 18030005825.

Copyright © 2026 Powergear X Automation Limited. All rights reserved.

Original Source: https://www.powergearx.com/