Name: E94ASHE0134 Lenze 9400 HighLine Single Drive 5.5 kW CANopen
SKU: E94ASHE0134
Price: 214.00 USD
Availability: InStock

Product details

E94ASHE0134 Lenze 9400 HighLine Single Drive Servo Axis Module

E94ASHE0134 is a Lenze 9400 HighLine Single Drive axis module. It suits cabinet mounting. It drives a 5.5 kW 4-pole asynchronous motor in the 400 V class. The module delivers 16.3 A rated output current at 4 kHz. Peak output reaches 24.4 A. Short-term current reaches 39 A with a 3x overload factor. A built-in CANopen port covers standard networking. Two extension slots accept communication and safety modules. This unit fits machine builders who need compact, high-overload servo control.

Technical Specifications

Brand: Lenze
Model: E94ASHE0134
Series: Servo Drives 9400 HighLine Single Drive
Module type: Single-axis drive module for cabinet mounting
Rated motor power: 5.5 kW nominal, ASM 4-pole, 400 V class
Rated output current: 16.3 A at 4 kHz switching frequency
Max output current: 24.4 A
Max short-term output current: 39 A
Overload factor: 3
Rated mains current: 11.8 A with mains choke, 16.8 A without choke
Rated DC-bus current: 20.6 A
Power loss: 320 W
Supply voltage: 3/PE AC 180 V to 550 V, 45 Hz to 65 Hz
DC supply: 260 V to 775 V
Built-in ports: CANopen on board, diagnostic USB via E94AZCUS adapter
Protocols: CANopen
Expansion: Two slots for E94AYC modules, one memory slot, one safety slot
Operating temperature: -10 °C to +55 °C, class 3K3
Temperature derating: 2.5 % per °C above +45 °C
Storage temperature: -25 °C to +60 °C, class 1K3
Transport temperature: -25 °C to +70 °C, class 2K3
Site altitude: up to 4000 m AMSL, derate 5 % per 1000 m above 1000 m
Vibration resistance: class 2M2, 10 Hz to 57 Hz at ±0.075 mm, 57 Hz to 150 Hz at 1.0 g
Humidity: climatic class 3K3, no specific %RH published
Protection rating: IP20 per EN 60529, NEMA 250 type 1
Dimensions: 350 mm with 507 backplane x 120 mm x 288 mm
Weight: 8.1 kg

Installation Guide

Mount the module vertically inside a closed cabinet.
Keep clearance above and below for airflow.
Use the 507 installation backplane for correct depth.
Tighten power terminals to the Lenze torque spec.
Connect the mains choke to cut mains current to 11.8 A.
Wire CANopen with shielded twisted pair cable.
Ground the module to the cabinet earth bar.
Check IP20 limits before opening the cabinet door.

Commissioning and Maintenance

Set motor data in the Lenze engineering tool first.
Run auto-tune on the 4-pole asynchronous motor.
Use the USB diagnostic port for fast fault reads.
Clean the heat sink every 12 months in dusty rooms.
Check fan and filter condition each service visit.
Store spare memory modules in a dry place.

Compatibility Notes

Works with Lenze 9400 HighLine system components.
Accepts E94AYC communication and safety modules.
Pairs with 5.5 kW 4-pole asynchronous motors in the 400 V class.
Uses the E94AZCUS adapter for USB diagnostics.
Fits standard Lenze cabinet layouts for the 9400 series.

Certifications and Standards

Protection rating: IP20 per EN 60529.
Enclosure rating: NEMA 250 type 1.
Climatic class: 3K3 per EN 60721-3-3.
Storage class: 1K3 per EN 60721-3-1.
Transport class: 2K3 per EN 60721-3-2.
Vibration: EN 60068-2-6 and Germanischer Lloyd rules.

Packing List and Warranty

One E94ASHE0134 axis module.
One installation backplane, 507 type.
One quick start guide.
Warranty: 12 months from the ship date.
Dispatch: 12 to 24 hours after payment clears.
Couriers: FedEx, UPS, DHL.

Expert Review

The E94ASHE0134 stands out for one reason: a 3x overload factor in a compact cabinet unit. The 39 A short-term current handles heavy starts without oversizing the drive. The built-in CANopen port keeps wiring simple. The two extension slots leave room for safety and network upgrades. Installers will like the USB diagnostic port. Machine builders will like the 5.5 kW rating in a small frame. This is a solid pick for demanding motion axes.

Manager’s Insight

Buyers often ask for a drive that survives peak loads. This module answers that need. The derating rules are clear, so you can size it for hot rooms and high sites without guesswork. Stock moves fast because the 9400 range stays active. Order early if you need several units for one project.

Best Fits and Use Cases

Packaging lines with frequent start and stop cycles.
Material handling conveyors and lifts.
Printing and paper converting machines.
Woodworking and metal cutting axes.
Test benches that need high peak torque.
Retrofit projects on existing 9400 cabinets.

FAQ

Q: Can this module run a motor without a mains choke?
A: Yes, but mains current rises to 16.8 A. Add a choke to stay at 11.8 A.
Q: How much current can it deliver for short bursts?
A: It reaches 39 A for short periods. That is a 3x overload factor.
Q: Does the room temperature affect output?
A: Yes. Derate 2.5 % per °C above +45 °C.
Q: What happens at high altitude?
A: Derate 5 % per 1000 m above 1000 m. The limit is 4000 m.
Q: Which tools help with setup?
A: The Lenze engineering tool and the USB diagnostic adapter.
Q: How fast do orders ship?
A: Orders leave in 12 to 24 hours by FedEx, UPS, or DHL.
Q: What is the warranty length?
A: The warranty runs 12 months from the ship date.
Q: Can I add a safety module later?
A: Yes. One safety slot and two extension slots stay open.
Q: Is CANopen enough for my network?
A: CANopen is built in. Add an E94AYC module for other protocols.
Q: How do I pick the right drive for my motor?
A: Match rated motor power and current first. Then check overload needs and cabinet space.