E94AMHE0134 Lenze 9400 HighLine Multi Drive Axis Module 5.5 kW

E94AMHE0134 — Lenze 9400 HighLine Axis Module

• E94AMHE0134 runs 5.5 kW 4-pole asynchronous motors.
  • Rated output current: 16.3 A at 4 kHz.
    • Max. output current: 24.4 A
    • Max. short-term current: 39 A
    • Overload factor: 3×
  • Rated DC-bus current: 20.6 A
  • Power loss: 280 W
• Fits DC-bus cabinets.
  • Supply: DC 260 V … 775 V
  • Backplane: 507 type
  • Size: 350 × 120 × 288 mm; 8.1 kg
• Links and ports.
  • CANopen on board
    • USB diagnostics via E94AZCUS adapter
  • Two slots for E94AYC… modules
    • One memory slot
    • One safety slot
• Climate and safety ratings.
  • Operating: -10 °C … +55 °C
    • Derate 2.5 %/°C above 45 °C
  • Storage: -25 °C … +60 °C
  • Transport: -25 °C … +70 °C
  • Altitude: up to 4000 m
    • Derate 5 % per 1000 m above 1000 m
  • Vibration: class 2M2 (EN 60068-2-6)
  • Protection: IP20; NEMA 250 type 1
• Product status.
  • Active L-force line; catalogue live (checked 2026-10)
  • Audit: OFFICIAL_VERIFIED

Expert Review

The E94AMHE0134 gives you real headroom. Its 39 A short-term current starts heavy loads with ease. The 5.5 kW class fits larger conveyors and mixers. Two slots add safety and fieldbus cards. Note the 120 mm width — check cabinet depth. The 280 W loss needs steady airflow. A strong choice when 3 kW is not enough.

Manager’s Insight

Buyers move to the E94AMHE0134 when lines grow. It handles peak loads that stall smaller units. Pair it with a safety card in slot two. Add the E94AZCUS adapter for quick setup. Watch heat at full load. We keep stock ready for fast dispatch. Email sales@powergearx.com or chat on +86 18030005825 for stock checks.

Best Fit Devices & Applications

• Heavy conveyors: high start torque needs 3× overload.
• Mixers and agitators: stable speed under load.
• Extruders: steady control with CANopen.
• Palletizers: fast axis moves.
• Large printing lines: multi-axis sync.
• Woodworking centers: strong spindle support.

FAQ

Q: What motor size suits this axis module?
A: Use a 5.5 kW 4-pole motor in the 400 V class. Check that the motor nameplate current stays near 16.3 A.

Q: Can it handle sudden heavy loads?
A: Yes. Short-term current reaches 39 A. The 3× overload factor covers fast starts and shocks.

Q: Is the 120 mm width a problem in tight cabinets?
A: It is wider than the 3 kW and 4 kW units. Measure your cabinet space first. Leave room for airflow and cables.

Q: How do I set up and test the module?
A: Use the USB adapter E94AZCUS. Plug it into the diagnostic port. Then run Lenze engineering software for auto-tune.

Q: What support and delivery do I get?
A: Every unit carries a 12-month warranty. We dispatch in 12-24 hours by FedEx, UPS, or DHL. Questions? Reach sales@powergearx.com or +86 18030005825 on WhatsApp.

Copyright © 2026 Powergear X Automation Limited. All rights reserved.

Original Source: https://www.powergearx.com/