Name: E84AYCPMV-S Lenze Inverter Drives 8400 PROFIBUS DP Communication Card Lenze Inverter Drives
SKU: E84AYCPMV-S
Price: 214.00 USD
Availability: InStock

Product details

E84AYCPMV-S PROFIBUS Communication Module for Lenze Inverter Drives 8400

The E84AYCPMV-S connects Lenze Inverter Drives 8400 to a PROFIBUS network. It fits the MCI slot. It supports StateLine C, HighLine C and TopLine C drives. The module handles fast process data and clear drive control. It suits demanding factory automation.

Key Benefits

Simple integration. Plugs into one MCI slot. No extra power supply needed.
Fast bus speed. Auto-detects baud rates from 9.6 kbit/s to 12000 kbit/s.
Flexible data use. Supports 1 to 16 process data words.
Wide network reach. Up to 31 slaves per segment without repeater. Up to 125 with repeaters.
Coated version. The V suffix marks the coated variant for tougher sites.
Proven protocol. Works with PROFIBUS DP-V0 (DRIVECOM) and DP-V1 (PROFIdrive).

Technical Specifications

Brand: Lenze
Model: E84AYCPMV-S
Series: Inverter Drives 8400
Module type: PROFIBUS communication option module, MCI slot
Protocol: PROFIBUS DP-V0 (DRIVECOM) and DP-V1 (PROFIdrive), PROFIdrive V3
Ports: 1 x 9-pin Sub-D connector
Baud rate: 9.6 kbit/s to 12000 kbit/s, automatic detection
Medium: RS 485
Node type: Slave
Topology: Line or tree with repeater; line without repeater
Process data words: 1 to 16 PCD, 16-bit each
Bus nodes: Max. 31 slaves per segment without repeater; max. 125 with repeaters
Max. cable length: 1200 m per bus segment, depends on baud rate and cable type
Address setting: DIP switch, electrically isolated from the bus
Free slots on drive: 1 MCI slot
Supply voltage: Not applicable, powered by the host drive via the MCI slot
Operating temperature: -10 °C to +55 °C (3K3, EN 60721-3-3)
Storage temperature: -25 °C to +60 °C (1K3, EN 60721-3-1)
Relative humidity: Non-condensing; no specific %RH value published in the official manual
Protection rating: IP20 (EN 60529)
Insulation voltage: 50 V to reference earth/PE
Dimensions (H x W x D): 50 mm x 67 mm x 50 mm
Weight: Not published by the manufacturer
Lifecycle: Mature. Active in the official Lenze 8400 catalogue as of 2026-10. No replacement listed.

Order Code Structure

E84AYCPMV-S
- E84AYCPM — core PROFIBUS module family
  - V — coated version
  - S — standard version (E84AYCPMS)
Protocol and interface data stay the same for both variants.

Installation Guide

Power off the Lenze 8400 drive first.
Insert the module into the free MCI slot.
Set the bus address with the DIP switch.
Connect the 9-pin Sub-D plug to the PROFIBUS line.
Use a repeater for long runs or many nodes.
Check the shield and earth connection.
Power on and confirm the bus link.

Setup and Maintenance

Address setup takes seconds with the DIP switch.
Baud rate detection is automatic. No manual tuning.
No battery or wear parts inside the module.
Check the Sub-D plug and cable shield at each service.
Keep the MCI slot free of dust and moisture.
The coated version resists harsh plant air.

Compatibility

Fits Lenze Inverter Drives 8400 StateLine C, HighLine C and TopLine C.
Uses PROFIBUS DP-V0 with DRIVECOM profiles.
Uses PROFIBUS DP-V1 with PROFIdrive profiles.
Works with standard PROFIBUS RS 485 networks.
Supports line and tree topologies with repeaters.

Approvals and Standards

Protection rating IP20 per EN 60529.
Climate class 3K3 per EN 60721-3-3 for operation.
Climate class 1K3 per EN 60721-3-1 for storage.
Designed for PROFIBUS DP and PROFIdrive networks.

Packing List and Warranty

1 x E84AYCPMV-S PROFIBUS module
1 x quick start note
12-month warranty on the module
Shipment within 12 to 24 hours after order confirmation
Express delivery by FedEx, UPS and DHL

Manager’s Insight

This module keeps older 8400 drives on a live PROFIBUS line.
It avoids a full drive swap in many upgrade projects.
The coated variant cuts downtime in dusty or humid rooms.
Stock one spare per line. Swap time is very short.

Expert Review

The module does one job well: clean PROFIBUS access for the 8400 family.
Auto baud detection removes common setup errors.
Up to 16 process words give enough speed for most drive tasks.
The 1200 m segment limit fits large plant layouts.
Weak point: no published weight, so plan rack space by size.

Best Fit Devices and Applications

Lenze 8400 StateLine C, HighLine C and TopLine C drives.
Conveyor lines and material handling cells.
Packaging and printing machines.
Textile and plastic lines with central PLC control.
Retrofit projects that keep an existing PROFIBUS network.

FAQ

Does this module fit any 8400 drive?
- It fits drives with a free MCI slot, mainly StateLine C, HighLine C and TopLine C.
Do I need a separate power supply?
- No. The host drive powers the module through the MCI slot.
What does the V in the order code mean?
- V marks the coated version. S marks the standard version.
How fast can the bus run?
- From 9.6 kbit/s up to 12000 kbit/s. The module detects the rate itself.
Can I use more than 31 nodes?
- Yes, with repeaters. The limit rises to 125 nodes.
How do I set the address?
- Use the DIP switch. It is isolated from the bus.
Experience tip: my drive shows no bus link. What first?
- Check the DIP address and the Sub-D plug. Most faults sit there.
Experience tip: long cable, weak signal. What helps?
- Add a repeater and keep the shield earthed at both ends.
Buying tip: coated or standard?
- Pick the coated V version for dust, humidity or washdown areas. Pick S for clean cabinets.
Buying tip: how many spares?
- Keep one spare per production line. Swap time is short.