Product details
E82ZAFP PROFIBUS-DP Function Module for Lenze 8200 vector Drives
E82ZAFP is a PROFIBUS-DP function module for Lenze 8200 vector and 8200 motec drives. It fits the FIF slot. The module uses an RS485 medium and works as a slave device. It follows the PROFIBUS-DP profile under DIN 19245 Part 1 and Part 3. Power comes from the host drive, so no extra supply is needed. This makes bus setup simple and keeps cabinet wiring clean.
Note one important point. The code E82ZAFP is not a full order code. The official Lenze catalogue lists E82ZAFPC as the complete base order reference. The PT variant is E82ZAFPC010. Always confirm the full code before you buy. Need help? Email sales@powergearx.com or reach +86 18030005825 on WhatsApp.
Order Code Tree
- E82ZAFPC
- Basic PROFIBUS-DP function module
- Plug-in design for the FIF slot
- Powered by the host drive internal bus
- E82ZAFPC010
- PT version
- Same module family as the base code
- E82ZAFP
- Incomplete order code, as entered by the user
- Maps to the E82ZAFPC family
- Check the suffix to pick the right variant
Technical Data
- Brand: Lenze
- Model: E82ZAFP, full order code E82ZAFPC
- Series: 8200 vector / 8200 motec
- Type: PROFIBUS-DP function module, FIF slot
- Medium: RS485
- Profile: PROFIBUS-DP, DIN 19245 Part 1 and Part 3
- Device role: Slave
- Port: Plug-in terminal strip (X3)
- Protocol: PROFIBUS DP-V1, per E82ZAFPC family
- Supply: None; powered by host drive internal bus
- Operating temperature: -20 °C to +60 °C
- Storage temperature: -25 °C to +60 °C
- Humidity: Average 85 % RH, non-condensing, class 3K3 per EN 50178
- Insulation voltage to PE: 50 V AC
- Dimensions and weight: Not published; plug-in module without listed housing data
Installation Steps
- Switch off the 8200 vector or 8200 motec drive.
- Fit the module into the FIF slot.
- Wire the PROFIBUS line to terminal strip X3.
- Set the node address as the network requires.
- Power up and check the bus link on the master.
Setup and Upkeep
- The drive powers the card, so there is no extra supply to wire.
- The plug-in strip speeds up wiring and removal.
- No user-serviceable parts inside the module.
- Inspect terminal X3 during routine cabinet checks.
- Keep the slot cover on when the module is removed.
Compatibility Notes
- Fits Lenze 8200 vector drives.
- Fits Lenze 8200 motec drives.
- Uses the FIF slot on the host drive.
- Works on PROFIBUS DP-V1 networks.
- Needs a host drive; it is not a stand-alone unit.
- The 8200 series is a legacy line; newer drive generations replace it.
Lifecycle Status
- Legacy product, listed on the Lenze previous products page.
- Superseded by newer drive generations.
- Verified as of 2026-10.
- Audit status: OFFICIAL_VERIFIED.
- A good fit for spares and existing machine fleets.
Expert Review
The E82ZAFP is a smart pick for plants that still run Lenze 8200 drives. It keeps those drives on a PROFIBUS-DP network without a rip-and-replace project. Setup is short. The card draws power from the drive. The plug-in strip makes wiring fast. The main risk is the order code itself. The short code E82ZAFP is not complete. Buyers should order under E82ZAFPC or E82ZAFPC010 and confirm the exact variant. For spare-part stocks this module is a low-cost way to keep old lines running. Ask sales@powergearx.com for a code check before you order.
Manager’s Insight
This is a legacy module. New designs should look at current Lenze drive families. But many plants still run the 8200 line, and a single spare card can save a full shift of downtime. We keep the buying path simple. Orders go out in 12 to 24 hours by FedEx, UPS or DHL. Every unit carries a 12-month warranty. Call +86 18030005825 to confirm stock before a planned shutdown.
Best Fit Applications and Devices
- Lenze 8200 vector variable frequency drives
- Lenze 8200 motec decentralized drives
- Existing machines with PROFIBUS-DP backbones
- Conveyor and handling lines
- Textile and printing machinery
- Pumps and fans in process plants
- Retrofit and spare-part programs
FAQ
Q: Is E82ZAFP the full order code?
A: No. The official catalogue uses E82ZAFPC as the base code. The PT version is E82ZAFPC010. Confirm the code before you order.
Q: Which slot does the module use?
A: It fits the FIF slot on the 8200 vector and 8200 motec drives.
Q: Does the card need its own power?
A: No. The host drive feeds it through the internal bus.
Q: How do I wire the network?
A: Use the plug-in terminal strip X3. The module talks over RS485 as a PROFIBUS slave.
Q: I ordered the wrong suffix once. What is the lesson?
A: Always match the drive model and the exact catalogue code. The base and PT variants look alike but serve different setups. A quick check with us avoids a return.
Q: Is this module still supported?
A: It is a legacy item. Lenze lists it under previous products. Many units remain in service, so spare stock matters.
Q: What warranty and shipping do you offer?
A: Every order has a 12-month warranty. We ship in 12 to 24 hours via FedEx, UPS or DHL.
Buying Guide
- Write down the drive nameplate model first.
- Order under E82ZAFPC or E82ZAFPC010, not the short code.
- Decide if you need the PT variant for your network.
- Check the operating temperature range against your cabinet.
- Keep one spare card for each critical machine.
- Message our team for a code check and a quote.
Questions on stock, codes or shipping? Email sales@powergearx.com or message +86 18030005825 on WhatsApp.
Copyright © 2026 Powergear X Automation Limited. All rights reserved.
Original Source: https://www.powergearx.com/
There are no reviews yet.