Name: E82ZAFCC001 Lenze CAN Function Module for 8200 vector and 8200 motec
SKU: E82ZAFCC001
Price: 214.00 USD
Availability: InStock

Product details

E82ZAFCC001 Lenze CAN Function Module for 8200 vector

A coated CAN module for tough plant floors. The E82ZAFCC001 plugs into the FIF slot of 8200 vector and 8200 motec drives. It links drives on the Lenze system bus. A conformal coating shields the board from dust, damp and fumes.

Key Benefits

Tough coating. The PCB resists harsh factory air.
Simple wiring. A plug-in terminal strip (X3) saves time.
Flexible roles. Use it as master or slave on one line.
Wide baud range. Pick from 20 to 500 kbit/s.
Big network. Up to 63 devices share the bus.

Specification Tree

Identity
- Brand: Lenze
- Model: E82ZAFCC001
- Series: 8200 vector
- Type: CAN function module, coated design
- Slot: FIF, for 8200 vector and 8200 motec
Network
- Medium: DIN ISO 11898
- Profile: close to CANopen (CiA DS301)
- Topology: line, 120 Ω terminators at both ends
- Role: system bus master or slave
- Max devices: 63
Speed
- Baud rates: 20 / 50 / 125 / 250 / 500 kbit/s
Ports
- Built-in: plug-in terminal strip (X3)
- Protocol: CAN, Lenze system bus
- Expansion: none; the host drive feeds the card
Power
- Supply voltage: not applicable; host drive internal bus
- Consumption: not applicable; host drive internal bus
Environment
- Operating: -20 to +60 °C
- Storage: -25 to +60 °C
- Humidity: average 85 % RH, no condensation
- Climatic class: 3K3 per EN 50178
- Insulation to PE: 50 V AC
Housing
- Dimensions: not published by Lenze
- Weight: not published by Lenze
- Form: plug-in card, no own housing data
Lifecycle
- Status: legacy, listed on Lenze previous products page
- Note: newer drive families replace the 8200 range
- Audit: OFFICIAL_VERIFIED, checked 2026-10

Where It Fits

Textile lines with many linked 8200 vector drives.
Packaging cells that need tight drive sync.
Conveyor groups spread over long runs.
Retrofit jobs on 8200 motec cabinets.
Plants with dust, mist or mild chemical load.

Expert Review

The E82ZAFCC001 does one job well: it puts an 8200 drive on the Lenze bus. The coating is the real win. Few cards in this class offer that level of board protection. Wiring is plain and quick. Speed steps cover most machine needs. The weak point is age. Lenze has moved on to newer drive lines. So buy this card for upkeep, not for new designs. Check stock early, because supply of legacy parts can dry up.

Manager’s Insight

Keep two cards per line as spares. A dead bus card can stop a whole cell. The low card price is small next to lost output. Store cards in sealed bags to protect the coating. Log each card swap in your maintenance file. Then you can spot repeat faults fast.

FAQ

Can I use this card on a 9300 drive?
No. It fits 8200 vector and 8200 motec only.
What terminator value do I need?
Fit 120 Ω at each end of the line.
How fast can I run the bus?
Top speed is 500 kbit/s. Short runs allow the top rate.
Does the card need its own power wire?
No. The host drive feeds it.
What if I skip the coating check?
Look for cracks or scratches before you fit the card.
How many nodes can I add?
Up to 63 devices in total.
Which card should I buy for a new machine?
Check the current drive family first. This card suits legacy 8200 units only.
What warranty and shipping do you offer?
Every order carries a 12-month warranty. We ship within 12 to 24 hours. Couriers are FedEx, UPS and DHL.