E82EV752K2C200 Lenze 8200 Vector Inverter 7.5kW Panel Drive

Product Description

• Model E82EV752K2C200 is a 7.5 kW panel‑mount inverter from the Lenze 8200 vector series.
• It drives standard four‑pole asynchronous motors with reliable V/f or sensorless vector control.
• This E82EV752K2C200 comes without an integrated EMC filter. You can add one if needed.
• The unit suits machine builders who want a proven, compact drive with easy setup.
• Lenze lists the 8200 vector as a legacy product. The official migration path is the i950 series.

Technical Specifications

• Brand: Lenze
• Model: E82EV752K2C200
• Series: 8200 vector
• Rated motor power: 7.5 kW (typical 4‑pole induction motor)
• Rated output current: 28.6 A at 8 kHz switching frequency
• Max. output current: 42.9 A for 60 s (periodic load cycle)
• Overload capacity: 1.8 × rated torque for 60 s (when motor and controller match)
• Motor control methods: V/f linear/quadratic, vector control, sensorless torque control
• Switching frequency: 2 / 4 / 8 / 16 kHz (noise‑optimised settings)
• Max. output frequency: 0 … 650 Hz
• Supply voltage: 1/N/PE or 3/PE AC 180 … 264 V (230 V class, 45 … 65 Hz)
• Power loss: 320 W at rated current / 8 kHz
• Built‑in I/O: X3 control terminals (digital inputs, analog input/output, relay output K1)
• Fieldbus / Ethernet: none integrated. Add plug‑in option modules if required (e.g. E82ZAFSC010, E82ZAFAC010).
• Operating temperature: -10 … +55 °C (derate 2.5 %/°C above +40 °C)
• Storage temperature: -25 … +60 °C
• Relative humidity: average 85 % RH, no condensation (climatic class 3K3 per EN 50178)
• Protection rating: IP20 (EN 60529); IP41 with push‑through mounting
• Dimensions (H×W×D): 240 × 125 × 140 mm (panel‑mount unit, per official catalogue)
• Weight: 3.6 kg

Installation Guide

• Mount the E82EV752K2C200 vertically on a flat panel inside an enclosure.
• Keep clearance for cooling above and below the unit.
• Use the push‑through mounting option to reach IP41 protection.
• Connect motor and supply cables according to the terminal diagram.
• Do not bundle control wires with power cables to avoid noise.
• Add an external EMC filter if your installation requires one (this variant has none built in).
• For fieldbus or extra I/O, plug in an option module before power‑on.

Commissioning and Maintenance

• Set motor data in the parameter menu (power, voltage, current, speed).
• Choose V/f or vector mode based on your load (vector for higher torque at low speed).
• Use the noise‑optimised switching frequency to reduce motor noise.
• Check heatsink temperature after 30 minutes of full‑load run.
• Clean cooling fins every 6 months in dusty environments.
• Replace fan if it becomes noisy or stops – this keeps the drive reliable.
• Store spare E82EV752K2C200 units in a dry place within -25…+60 °C.

Compatibility Notes

• Designed for 230 V class three‑phase or single‑phase supply.
• Works with standard four‑pole asynchronous motors up to 7.5 kW.
• Optional plug‑in modules (E82ZAFSC010, E82ZAFAC010) add fieldbus or extra I/O.
• Lenze confirms the i950 drive can emulate 8200 vector behaviour via PROFIBUS module / L_ICIP library.
• No drop‑in same‑order‑code replacement exists. Plan for migration if you need long‑term supply.

Certifications and Compliance

• Climatic class 3K3 per EN 50178 (humidity and temperature).
• Protection rating IP20 / IP41 per EN 60529.
• CE marking applies to the 8200 vector series (confirm on the unit label).
• Lenze provides official migration documentation for the i950 series.

Packing List

• 1 × E82EV752K2C200 inverter
• 1 × quick start guide (multilingual)
• 1 × terminal cover (pre‑fitted)
• Warranty card with 12‑month coverage
• Orders ship within 12‑24 hours via FedEx, UPS, or DHL.
• Tracking number provided after dispatch.

Warranty and Shipping

• 12‑month warranty covers manufacturing defects.
• We dispatch in 12–24 hours after payment clears.
• Express options: FedEx, UPS, DHL. Delivery times vary by destination.
• For inquiries: sales@powergearx.com or +86 18030005825 (WhatsApp).

Expert Review

• The E82EV752K2C200 is a solid workhorse for simple pump, fan, and conveyor tasks.
• Its 7.5 kW rating and 1.8× overload for 60 s handle moderate shock loads well.
• The lack of built‑in fieldbus keeps cost low, but you must add an option module for networks.
• Legacy status means limited long‑term availability. Stock spares if you run multiple units.
• The sensorless vector mode gives decent torque at low speed without an encoder.

Manager’s Insight

• Many customers use this drive as a drop‑in replacement for existing 8200 vector units.
• Always check the exact suffix (this is the 2xx design, no EMC filter).
• If you plan a new machine, consider the i950 – but the E82EV752K2C200 remains a cost‑effective spare.
• Keep one or two in stock because lead times for legacy parts can stretch.

Best Fit Applications

• Conveyor belts in packaging and logistics.
• Centrifugal pumps and fans in HVAC or water treatment.
• Simple mixers and agitators that need 7.5 kW output.
• Retrofit projects where an existing 8200 vector drive failed.
• Panel‑mount installations with limited space (240 × 125 × 140 mm).

Frequently Asked Questions

Buying Guide

• Confirm your motor power is 7.5 kW or less and rated current does not exceed 28.6 A.
• Check if you need a built‑in EMC filter. If yes, look for a different 8200 vector variant or add an external filter.
• List any fieldbus or extra I/O needs. This model needs a plug‑in module for that.
• Measure your panel space: the unit is 240 × 125 × 140 mm.
• If you are building new machines, compare the i950 series for long‑term availability.
• Order a spare E82EV752K2C200 if your production line depends on the 8200 vector family.

Copyright © 2026 Powergear X Automation Limited. All rights reserved.

Original Source: https://www.powergearx.com/