E82EV553K4B302 Lenze 8200 Vector 55 kW Inverter

Product Overview

E82EV553K4B302 is a Lenze 8200 vector frequency inverter. It drives a 55.0 kW four-pole asynchronous motor. This panel-mounted E-design unit includes a footprint mains filter. It suits demanding industrial speed and torque control.

The drive offers V/f control, vector control, and sensorless torque control. It delivers 110 A nominal output current at 1 kHz. Short-time current reaches 165 A for 60 s. Overload capacity is strong: 1.8 x rated torque for 60 s and 2.1 x rated torque for 3 s.

This is a legacy Lenze product. Lenze confirms a migration path to the i950 series. The i950 emulates 8200 vector behaviour via a PROFIBUS module and the L_ICIP library. No drop-in same-order-code replacement exists.

Technical Data

• Brand: Lenze
• Model: E82EV553K4B302
• Series: 8200 vector
• Module type: Panel-mounted frequency inverter, E design, 3xx variant with mains filter
• Rated motor power: 55.0 kW (4-pole three-phase asynchronous motor)
• Output current: 110 A nominal at 1 kHz; 165 A maximum for 60 s
• Motor control: V/f linear and quadratic, vector control, sensorless torque control
• Switching frequency: 1 / 2 / 4 / 8 / 16 kHz, noise or power-loss optimised
• Output frequency range: 0 to 650 Hz
• Overload: 1.8 x rated torque for 60 s; 2.1 x rated torque for 3 s after enable
• Supply voltage: 3/PE 320 to 550 V AC (45 to 65 Hz); DC 450 to 775 V
• Built-in ports: X3 control terminals with digital inputs, analog input/output, relay output K1
• Integrated fieldbus: None; expand via plug-in option modules such as E82ZAFSC010 or E82ZAFAC010
• Operating temperature: -10 to +50 °C; derate 2.5 % per °C above +40 °C; max +35 °C at increased rated power
• Storage temperature: -25 to +60 °C
• Humidity: Average 85 % RH, no condensation, climatic class 3K3 per EN 50178
• Protection rating: IP20 per EN 60529; IP41 with push-through mounting
• Dimensions (H x W x D): 591 x 340 x 375 mm
• Weight: 66 kg with integrated mains filter

Installation Guide

• Mount the unit vertically on a firm panel. Keep airflow clear above and below.
• Use the push-through option for IP41 protection and thermal separation.
• Connect mains to the 3/PE input. Check voltage within 320 to 550 V AC.
• Wire the motor to the output terminals. Match cable size to 110 A nominal current.
• Use the X3 terminals for digital inputs, analog signals, and relay K1.
• Add a fieldbus option module only if network control is required.
• Tighten all power connections. Verify earth bonding before power-up.

Commissioning and Maintenance

• Set motor data first. Enter rated power, current, and frequency.
• Choose V/f or vector mode to match the load.
• Tune switching frequency for noise or loss balance.
• Check overload settings against the 1.8 x and 2.1 x limits.
• Clean cooling paths at regular intervals. Keep vents free of dust.
• Inspect terminals for tightness during scheduled service.
• Store spare option modules in dry conditions.

Compatibility Notes

• Works with standard four-pole three-phase asynchronous motors up to 55.0 kW.
• Accepts plug-in I/O and fieldbus modules from the 8200 vector family.
• No onboard Ethernet or fieldbus. Plan network integration with an option module.
• Migration to Lenze i950 is supported. Behaviour emulation needs the i950 PROFIBUS module and L_ICIP library.
• No direct same-order-code replacement is available.

Certifications and Compliance

• Protection rating certified to EN 60529.
• Climatic class 3K3 per EN 50178.
• Official Lenze catalogue and datasheet data verified as of 2026-10.
• Audit status: OFFICIAL_VERIFIED.

Packing List

• 1 x Lenze E82EV553K4B302 inverter unit
• 1 x Integrated footprint mains filter
• 1 x Installation and commissioning documentation
• 1 x Terminal and connector set as supplied

Warranty and Shipping

• 12-month warranty on the product.
• Dispatch within 12 to 24 hours after order confirmation.
• Shipping by FedEx, UPS, or DHL.
• Tracking number sent after dispatch.

Expert Review

The 8200 vector is a proven workhorse. Its high overload headroom and flexible control modes still fit many retrofit projects. The integrated mains filter saves panel space. Buyers should note the IP20 rating and plan a clean cabinet. The lack of onboard fieldbus is the main limit. Budget for an option module if network control matters. For new builds, the i950 migration path is the safer long-term choice.

Manager’s Insight

Stock this model for maintenance and legacy replacement demand. It moves well for plants running older Lenze systems. Keep one or two option modules on hand to close fieldbus gaps. Always confirm the 55.0 kW motor match and the 320 to 550 V AC supply before quoting. Fast dispatch and a 12-month warranty make it an easy upsell.

Best-Fit Equipment and Applications

• Pumps and fans in process plants
• Conveyors and material handling lines
• Mixers and agitators
• Machine tools needing vector control
• Legacy Lenze 8200 vector retrofits
• Packaging and printing machinery

FAQ

Q: Does this drive include a fieldbus port?

A: No. It has control terminals only. Add a plug-in option module for fieldbus or extra I/O.

Q: Can I replace an old 8200 vector with the same order code?

A: Lenze states there is no drop-in same-order-code replacement. Plan a migration to the i950 series.

Q: What motor size fits best?

A: A four-pole three-phase asynchronous motor rated at 55.0 kW is the standard match.

Q: How fast do you ship?

A: Orders usually leave within 12 to 24 hours by FedEx, UPS, or DHL.

Q: Is the mains filter built in?

A: Yes. This 3xx design variant includes a footprint mains filter.

Q: What is the maximum ambient temperature?

A: Up to +50 °C with derating. At increased rated power, keep it at or below +35 °C.

Q: From experience, what should I check first on site?

A: Check supply voltage and earth bonding. Then confirm motor data before the first run.

Q: How do I choose between this unit and a newer drive?

A: Choose this unit for legacy spares or fast replacement. Choose the i950 for new builds and long-term support.

Buying Guide

• Confirm the motor is a four-pole unit at 55.0 kW.
• Verify supply is 3/PE 320 to 550 V AC.
• Decide if fieldbus is needed. If yes, order an option module.
• Check cabinet space for 591 x 340 x 375 mm and 66 kg.
• Plan cooling for ambient above +40 °C.
• For new projects, compare the i950 migration path first.

Contact Information

• Inquiries: sales@powergearx.com
• Phone / WhatsApp: +86 18030005825

Copyright © 2026 Powergear X Automation Limited. All rights reserved.

Original Source: https://www.powergearx.com/