Name: E82EV402K2C Lenze 8200 Vector 4.0 kW Inverter | Powergear X
SKU: E82EV402K2C
Price: 214.00 USD
Availability: InStock

Product details

E82EV402K2C Lenze 8200 Vector Frequency Inverter – 4.0 kW Panel-Mounted Drive

The E82EV402K2C is a Lenze 8200 vector frequency inverter. It is a panel-mounted E-design unit. It runs a 4.0 kW four-pole asynchronous motor. The drive supports V/f control, vector control, and sensorless torque control. It is a proven workhorse for industrial speed control.

Key Technical Data

Brand: Lenze
Model: E82EV402K2C
Series: 8200 vector
Module type: Panel-mounted frequency inverter (E design)
Rated motor power: 4.0 kW typical (4-pole three-phase async motor)
Rated output current: 16.5 A at 8 kHz switching frequency; 19.8 A at 2/4 kHz (increased rating)
Max output current: 24.8 A for 60 s (periodic load cycle)
Overload: 1.8 x rated torque for 60 s
Switching frequency: 2 / 4 / 8 / 16 kHz, noise-optimised
Output frequency range: 0 to 650 Hz
Supply voltage: 1/N/PE or 3/PE AC 180 to 264 V (230 V class, 45 to 65 Hz)
Power loss: 190 W at rated current / 8 kHz
Operating temperature: -10 to +55 °C (derate 2.5%/°C above +40 °C)
Storage temperature: -25 to +60 °C
Humidity: 85 % RH average, no condensation (climatic class 3K3)
Protection rating: IP20; IP41 with push-through mounting
Dimensions (H×W×D): 240 × 100 × 140 mm
Weight: 2.9 kg

Core Performance Information

Measurement range: 0 to 650 Hz output frequency
Frequency response: fast torque response via sensorless vector control
Sensitivity and linearity: stable V/f linear and quadratic curves
Resolution: fine speed steps across the full output range
Temperature range: -10 to +55 °C operating
Environmental tolerance: 3K3 climatic class, 85 % RH
Interference immunity: built for industrial EMC environments per EN 50178

Communication and Compatibility

Built-in ports: X3 control terminals with digital inputs, analog input/output, and relay output K1
Onboard fieldbus: none
Ethernet: none
Protocols: no integrated fieldbus protocol
Expansion: plug-in I/O and fieldbus option modules, e.g. E82ZAFSC010 Standard I/O and E82ZAFAC010 Application I/O
Migration path: Lenze confirms the i950 emulates 8200 vector behaviour via the i950 PROFIBUS module and L_ICIP library (AKB articles 321231/316137)
Drop-in replacement: none; order codes differ across generations

Installation Guide

Mount the unit vertically on a panel with clear airflow.
Keep the heatsink free; use push-through mounting for IP41.
Wire supply to 1/N/PE or 3/PE AC 180 to 264 V.
Connect the motor to the output terminals with shielded cable.
Land control wiring on X3: digital inputs, analog signals, relay K1.
Derate 2.5 % per °C above +40 °C ambient.
Follow local EMC rules for cable routing and grounding.

Commissioning and Maintenance

Set motor data first; the drive auto-tunes key parameters.
Pick V/f linear, V/f quadratic, or vector mode per load.
Set switching frequency to balance noise and heat.
Check fan paths and terminal torque at each service visit.
Clean heatsink fins in dusty plants.
No special tools are needed for routine checks.

Certifications and Packaging

Protection rating IP20 per EN 60529; IP41 with push-through mounting
Climatic class 3K3 per EN 50178
Package contents: one E82EV402K2C inverter, mounting and terminal documentation
Warranty: 12 months
Dispatch: ships within 12 to 24 hours
Couriers: FedEx, UPS, DHL

Manager’s Insight

This unit suits plants that still run the 8200 vector family. It is a safe spare-part pick. Stock it before a line stops. The 4.0 kW class covers pumps, fans, and conveyors. Buyers who plan a long upgrade should ask about the i950 path at the same time.

Expert Review

Our engineers rate the E82EV402K2C as a robust, simple drive. Vector control gives good torque at low speed. Terminal-based control keeps wiring clear. The main limit is the missing onboard fieldbus. Plan an option module if your network needs one.

Best Fit Applications

Pumps and fans with variable flow demand
Conveyors and material handling lines
Packaging and textile machines
Legacy 8200 vector retrofit and spare-part pools
Panel builders needing a compact 4.0 kW drive

Buying Guide

Confirm 4.0 kW motor power and 16.5 A rated current first.
Check your supply: 1/N/PE or 3/PE AC 180 to 264 V.
List needed I/O; add E82ZAFSC010 or E82ZAFAC010 if short.
Pick fieldbus modules only if the machine network requires them.
Order spares early; this series is a previous product.
Ask us about the i950 migration route for new builds.

FAQ

Q: Is the E82EV402K2C still supported?
A: Yes. Lenze keeps a previous-products page and an i950 migration path.
Q: Does it have a built-in fieldbus?
A: No. Add a plug-in option module for fieldbus or extra I/O.
Q: What motor does it drive?
A: A 4.0 kW four-pole three-phase asynchronous motor.
Q: Can I swap it for an i950 with the same order code?
A: No. The i950 emulates 8200 vector behaviour, but codes differ.
Q: How fast do you ship?
A: Within 12 to 24 hours by FedEx, UPS, or DHL.
Q: Experience tip — what fails first in the field?
A: Dust on heatsink fins. Clean them at every service.
Q: Experience tip — how do I avoid nuisance trips?
A: Set switching frequency to 4 kHz in hot panels and derate above +40 °C.
Q: Buying tip — spare or upgrade?
A: Buy this unit to keep a running line alive. Choose i950 for new projects.