Product details
M10 Metric Thread Armored Probe for Global Machinery
Introducing the new and original Bently Nevada 330910-00-13-10-02-00. This is a 3300 NSv series proximity probe with a standard M10x1 metric thread. It comes with a protective stainless steel armor and a 1.0-meter cable. Perfect for applications requiring metric fittings and durable cable protection. Every unit includes a 12-month factory warranty and ships in sealed factory packaging.
Get a Quote Fast: Contact our sales team at sales@powergearx.com or call/WhatsApp +86 18030005825.
Core Advantages at a Glance
- Metric Thread (M10x1): Direct fit for machinery and mounts using metric standards.
- Full Armor Protection: Armored cable withstands physical stress in tough plant areas.
- Enhanced Chemical Resistance: Reliable performance in process gas and chemical environments.
- Backward Compatible: Drop-in replacement for older 3300 RAM system components.
- Improved Signal Fidelity: Superior side-view characteristics ensure accurate readings.
Complete Technical Data Sheet
- Manufacturer & Series: Bently Nevada 3300 NSv
- Exact Part Number: 330910-00-13-10-02-00
- Mounting Thread: M10 x 1.0 mm pitch.
- Case Length: 130 mm overall.
- Cable Specification: 1.0 meter (39 in) armored, 75 Ohm coaxial with FEP insulation.
- Electrical Output (ISF): 7.87 Volts per mm (200 mV/mil).
- Linear Measurement Range: 1.5 mm (60 mils) peak-to-peak.
- Probe Gap Setting: Optimize at 1.0 mm (40 mils).
- Frequency Bandwidth: Flat from 0 to 10,000 Hz.
- Electrical Resistance: 4.2 Ohms (±0.5 Ω) at 1-meter length.
- Operating Temp Range: Wide from -52°C to +177°C.
- Housing & Seal: 304 Stainless Steel case with Viton O-ring.
- Minimum Target Size: 13 mm diameter recommended.
- Connector Type: Miniature Coaxial ClickLoc.
Quick-Start Installation Guide
- Step 1 – Mounting: Screw the probe into the M10x1 threaded hole. Tighten by hand only. Do not use tools on the probe body.
- Step 2 – Gap Setting: Adjust the probe position until the tip is 1.0 mm from the target shaft surface.
- Step 3 – Cable Routing: Secure the armored cable. Avoid sharp bends below 25 mm radius.
- Step 4 – Connection: Attach the ClickLoc connector to the extension cable or proximitor. Hand-tighten firmly.
Your Purchase Includes
- One (1) Bently Nevada 330910-00 Armored Proximity Probe.
- Original factory box and packing materials.
- Full 12-month manufacturer’s warranty against defects.
- Option for fast global shipping via FedEx, UPS, or DHL.
- Direct access to our technical support team.
Professional FAQ & Selection Guide
Technical Specifications
Q: My machine drawing calls for an M10 thread. Is this the correct model?
A: Yes. The 330910 model is specifically designed with an M10x1.0 metric thread. It is the direct choice for metric mounting holes.
Q: What is the weight of this armored probe?
A: The typical system weight for an armored probe ranges from 14 to 150 grams. The exact weight depends on the cable length and armor.
Application & Compatibility
Q: Can I use this M10 threaded probe in a 3/8-24 UNF mounting hole?
A: No. The M10x1 and 3/8-24 UNF threads are not interchangeable. You must use an adapter or select the correct probe model for your thread type.
Q: Is the probe body fully sealed?
A: Yes. The probe features a Viton O-ring seal designed to handle differential pressure between the tip and case. For specific pressure testing, contact our custom department.
Ordering & Logistics
Q: How do I ensure I get the genuine 12-month warranty?
A: Purchase only from authorized distributors like us. Our products are new, original, and factory-sealed, which guarantees the full manufacturer warranty applies.
Ready to order or need a custom quote? Reach out now.
Email: sales@powergearx.com
Phone / WhatsApp: +86 18030005825
Original Source: https://www.powergearx.com/
Copyright © 2025 Powergear X Automation Limited. All rights reserved.
There are no reviews yet.