Bently Nevada 330707-00-25-10-01-05 | 3300 XL 11mm Probe with Multi-Certification

Versatile Vibration Sensing for Critical Assets

Meet the Bently Nevada 330707-00-25-10-01-05. This is a standard-duty 3300 XL 11 mm Proximity Probe. It offers precise vibration monitoring for industrial machinery. Its 2.5-inch case suits most common mounting depths. The 1.0-meter cable is perfect for nearby monitors. This probe helps you spot machine faults early. It is made in the USA for long-lasting performance.

Model Number Structure

• Core Product: 330707 – 3300 XL 11mm Probe, 5/8-18 UNF, No Armor
• Complete Part ID: 330707-00-25-10-01-05
  • -00: Unthreaded Part = 0.0 in
  • -25: Probe Case = 2.5 in
  • -10: Cable = 1.0 metre
  • -01: Connector = ClickLoc with Protector
  • -05: Safety Approvals = Multiple

Key Performance Specifications

• Electrical Data:
  • Resistance (1.0m): 5.9 ± 0.5 ohms
  • Cable: 75 Ω Triaxial, FEP Type
• Mechanical Design:
  • Mounting Thread: 5/8-18 UNF
  • Body: AISI 304 Stainless Steel
  • Sensing Tip: PPS Material
  • Thread Engagement Max: 0.938 in
  • Safe Bend Radius: 25.4 mm (1 inch)
• Installation Torque (5/8-18):
  • Do Not Exceed: 45.2 N•m
  • Best Practice: 15.2 N•m (133 in•lb)
• Environmental Limits:
  • Working Temperature: -51°C to +177°C
  • Seal Type: Viton O-Ring
  • Warning: Prolonged cold below -34°C can harm the seal.
• Package Weight: 0.17 Kg

Installation & Selection FAQ

What is the main use for a 2.5-inch case length?

This length is a common standard. It fits well in average machine housings. It provides good stability without being too long.

What does “Multiple Approvals” (Option 05) include?

It means the probe meets several international safety standards. It is certified for use in potentially explosive atmospheres. Check your plant requirements.

Can I use this for both vibration and position measurement?

Yes. This proximity probe measures relative vibration (dynamic) and average position (static gap). It provides two key data points.

How do I connect the ClickLoc connector with protector?

The protector is a plastic cap. Remove it before connecting. Align the connector and push until it clicks. The cap can be stored for future use.

My machine has an M16x1.5 threaded hole. Can I use this probe?

This probe has a 5/8-18 UNF thread. You will need a suitable threaded adapter to install it in an M16 hole.

Easy Ordering & Support Guide

• The 330707-00-25-10-01-05 is a versatile, commonly used model.
• Ensure your equipment uses a 5/8-18 UNF thread.
• Always install using a torque wrench set to 15.2 N•m.
• All products are backed by a full 12-month warranty.
• We offer reliable shipping with FedEx, UPS, and DHL.

Need help selecting the right probe or confirming specs? Reach out: sales@powergearx.com or call +86 18030005825 on WhatsApp.

Copyright © 2025 Powergear X Automation Limited. All rights reserved.
Original Source: https://www.powergearx.com/
Partner: PLCDCS HUB Limited https://plcdcshub.com/