Product details
Compact 8mm Vibration Probe with Connector Protector
This is the Bently Nevada 330101-00-30-10-01-00. It is a standard-duty 3300 XL 8mm Proximity Probe. It features a fully threaded 3-inch body for flexible mounting. This model includes a connector protector for safe handling. It is an excellent choice for general-purpose vibration monitoring in non-hazardous areas.
What Makes This Probe Special?
- Short & Fully Threaded Body: With a 3.0-inch case, it fits in tight spaces. The 00 suffix means it threads in completely for a secure hold.
- Connector Protector Included: The -01 option adds a plastic guard over the ClickLoc connector. It prevents damage during shipping and handling.
- Rugged 8mm Construction: Built with a thick stainless steel case. It handles more physical stress than smaller 5mm probes.
- Reliable Cable Connection: The CableLoc design provides strong pull-out resistance. Your signal stays secure even in high vibration.
- Easy to Install & Set Up: The standard 1-meter cable and connector make installation quick. It works directly with your 3300 monitor.
Product Configuration Details
Understanding Your Part Number:
- Main Product Code: 330101 – Bently Nevada 3300 XL 8mm Probe
- Your Exact Model: 330101-00-30-10-01-00
- -00: Unthreaded Length = 0.0 in (Fully Threaded)
- -30: Case Length = 3.0 inches total
- -10: Cable Length = 1.0 meter
- -01: Connector = ClickLoc with Protector
- -00: Approvals = Not Required
Key Performance Specifications:
- Range: Measures shaft motion within a 2.0 mm (80 mil) window.
- Setup: Set the gap to get -9 Vdc on your monitor for best results.
- Output: Provides 7.87 Volts per millimeter (200 mV/mil) of movement.
- Temperature: Operates from -52°C to +177°C (-62°F to +350°F).
- Build: Sensing tip is tough PPS plastic. The body is stainless steel.
- Wiring: Connect using standard shielded cable. Runs up to 305 meters are possible.
Simple Guide for Use & Care
- This short probe is great for machines with limited space around the mounting point.
- Because it’s fully threaded, you can adjust the depth easily. Do not screw it in more than 0.56 inches past the threads.
- Use a torque wrench. Tighten to 100 in-lbs on the probe hex flats.
- Remove the plastic connector protector before plugging it into the proximitor.
- The probe works with all Bently Nevada 3300 XL system monitors. It is a direct replacement part.
- Maintenance is simple. Keep the tip clean and check the cable for damage during routine checks.
Your Purchase Includes
- One genuine Bently Nevada probe with attached 1-meter cable.
- A protective cap on the connector for shipping.
- A full 12-month product warranty for peace of mind.
- Fast shipping options via FedEx, UPS, or DHL to your location.
- Perfect for motors, fans, pumps, and compressors in standard industrial plants.
- It helps you monitor machine health and spot problems like unbalance early.
Helpful Questions & Answers
Why choose the -01 connector option over -02?
The -01 includes a plastic protector. It safeguards the delicate connector pins from dust, impact, and moisture during storage and handling before installation.
Is this probe suitable for outdoor use?
Yes. Its stainless steel body and PPS tip resist weather. However, ensure the electrical connections at the proximitor are in a protected enclosure.
Can I cut and re-terminate the cable if it’s too long?
No. The cable is permanently attached at the factory. Cutting it will void the warranty. Order the correct cable length suffix (-10 for 1m, -50 for 5m, etc.).
What if I need this probe for a hazardous area?
This model (-00 approval suffix) is not certified. For hazardous locations, you must order a probe with the -05 approval suffix (CSA/ATEX/IECEx).
How quickly can I get this probe?
We ship in-stock items within 1-2 business days via your chosen carrier (FedEx/UPS/DHL). You will get a tracking number. Delivery time depends on your location.
Ready to order or have a technical question?
Our team is here to help you select the right sensor for your machine. Contact us for quick support.
Email: sales@powergearx.com
WhatsApp/Call: +86 18030005825
Authorized Partner Network: Oiltech Controls Limited and PLCDCS HUB Limited.
Copyright © 2025 Powergear X Automation Limited. All rights reserved.
Original Source: https://www.powergearx.com/
Thomas Reed –
We installed this 3-inch 8mm vibration probe on a centrifugal pump application. The probe was new, clean, and ready to install right out of the box. PowerGearX delivered faster than expected, which helped minimize downtime. Signal quality has been excellent, and the probe works perfectly with our existing Bently Nevada system. This has improved our ability to detect early-stage bearing issues. Very satisfied with both the product and the supplier’s service.