Product details
Product Snapshot
- Manufacturer: Bently Nevada
- Model: 31000-27-05-15-040-03-02
- Series: 31000 Proximity Probe Housings
- Origin: Made in U.S.A
- Designed for safe probe mounting in harsh areas
Configuration Breakdown
- Probe Interface
- Probe option 27
- Supports 3300 XL NSv probes
- Multiple international approvals
- Cable & Distance
- Cable length 0.5 meters
- Compact routing inside housing
- Mechanical Offset
- Standoff adapter 1.5 inches
- Probe penetration depth 40 mm
- Thread & Mounting
- Mounting thread 3/4-14 NPT
- Required for standoff adapter use
Fittings & Sealing System
- Two sealing plugs included
- One 3/4-14 NPT process fitting
- One 3/4 to 1/2 NPT reducer
- Cable grip with multi-size grommets
- Supports cables from 1/8 to 3/8 inches
Material & Structural Design
- Housing Body
- Glass-reinforced PPS plastic
- Conductive fibers reduce static charge
- Metal Components
- Sleeve and chain in 304 stainless steel
- Outer sleeve and screws in 303 stainless steel
- Sealing Parts
- Neoprene O-ring
- Designed for long-term compression
Protection & Compliance
- Type 4X enclosure certified by CSA
- IP66 protection against dust and water
- Electrostatic safe per EN50014
- Approved for hazardous locations
Strength & Reliability Data
- Impact resistance up to 7 Joules
- Tested at extreme cold and heat
- Supports static load up to 912 N
- Recommended torque 29.4 N·m
- Weight approximately 1.2 kg
Operating Conditions
- Temperature range from -51°C to +105°C
- Stable performance in outdoor sites
- Suitable for vibration-heavy equipment
Key Product Advantages
- Protects probes from impact damage
- Reduces cable stress and wear
- Improves safety in hazardous zones
- Extends probe service life
- Easy access for maintenance
Typical Use Scenarios
- Turbine probe mounting
- Compressor monitoring systems
- Oil and gas processing plants
- Chemical and refinery units
- Outdoor rotating machinery
Warranty & Shipping
- Standard warranty 12 months
- Factory inspected before shipment
- Worldwide shipping by FedEx
- UPS and DHL express available
Professional FAQ
- Why use a probe housing instead of direct mounting?
- It protects probes from weather and impact.
- Is this housing suitable for outdoor installation?
- Yes. It meets IP66 and Type 4X standards.
- Does the housing reduce electrical noise?
- Yes. Conductive PPS helps control static charge.
- What improves long-term sealing performance?
- The Neoprene O-ring maintains pressure over time.
- Can this housing support heavy probe assemblies?
- Yes. It supports over 900 N static load.
Contact Information Inquiries:
sales@powergearx.com |
+86 18030005825
Copyright © 2025 Powergear X Automation Limited. All rights reserved.
Original Source:
https://www.powergearx.com/
Partner:
Ubest Automation Limited
There are no reviews yet.