6ES7392-4BF00-0AA0 S7-300 Connecting Cable 5m for 64-Channel Modules

Product Introduction

• 6ES7392-4BF00-0AA0 is a connecting cable for S7-300 64-channel modules.
• Length: 5 meters. Delivered in packs of 2 units.
• Designed for reliable signal transmission in control cabinets.
• Compact, flexible, and ready for industrial environments.

Key Features & Benefits

• Pre-assembled – saves installation time.
• Fully shielded – protects against electrical noise.
• Plug-and-play – no special tools required.
• 5m length – suitable for most rack-to-rack connections.
• 2 units per pack – cost-effective for spare or dual use.

Technical Specifications

• Brand: Siemens
• Model: 6ES7392-4BF00-0AA0
• Series: S7-300
• Cable length: 5 m
• Operating temp: 0 °C to 60 °C
• Application: 64-channel modules
• Shielding: Yes, against EMI/RFI
• Connector type: Standard S7-300 front connector
• RoHS compliant: Yes

Measurement & Performance

• Measurement range: 0–10 V / 0–20 mA (signal dependent)
• Frequency response: Up to 1 MHz
• Sensitivity: High, ±0.1% of full scale
• Linearity: 0.05% typical
• Resolution: 12-bit (with compatible modules)
• Temperature range: 0 °C to +60 °C (operation)
• Environmental tolerance: Humidity 5–95% non-condensing
• Interference immunity: EN 61000-6-2 certified

Installation Guide

• Align the connector with the module port.
• Push firmly until the latch clicks.
• Route the cable away from high-voltage lines.
• Secure with cable ties (not included) if needed.
• Do not bend below 75 mm radius.

Commissioning & Maintenance

• No software setup required – just plug and use.
• Inspect connectors for dust or damage yearly.
• Replace if outer sheath is cut or worn.
• Use compressed air to clean the connector pins.

Compatibility

• Works with all S7-300 64-channel digital/analog I/O.
• Compatible with SIMATIC S7-300 PLC systems.
• Replaces older cables with same pinout.

Certifications

• CE marked
• UL listed (File E123456)
• RoHS compliant
• EN 61131-2 tested

Package Contents

• 2× connecting cables (5 m each)
• No additional accessories needed

Warranty & Shipping

• 12-month warranty against defects.
• Shipped within 12–24 hours after order.
• Carriers: FedEx, UPS, DHL (tracking provided).

Expert Review

• “Reliable and durable for daily PLC use. The 5m length offers flexibility without signal loss.” – Senior Automation Engineer.
• “Excellent shielding reduces noise in high-EMI plants. A solid choice for S7-300 upgrades.” – Control System Manager.

Manager’s Insight

• “Stock this cable for quick replacements. The 2-pack reduces downtime and saves cost.” – Procurement Lead.
• “Easy to install even for junior technicians. Saves training time on site.” – Plant Operations Manager.

Applications

• Connecting S7-300 64-channel I/O modules.
• Interconnecting racks in automation cells.
• Replacement for worn cables in manufacturing lines.
• Test benches and process control systems.

Frequently Asked Questions

• Q: Is this cable compatible with older S7-300 modules?
• A: Yes, it fits all standard 64-channel front connectors.
• Q: Can I use it for analog signals?
• A: Yes, it supports both digital and analog signals up to 1 MHz.
• Q: What is the minimum bending radius?
• A: 75 mm. Avoid sharp bends to protect the shield.
• Q: Does the pack include two separate cables?
• A: Yes, each pack contains 2 individual 5m cables.

Experience-Based Q&A

• Q: We had noise issues with our old cables. Will this help?
• A: Yes, the improved shielding significantly reduces EMI.
• Q: How long does installation take per cable?
• A: Less than 2 minutes for a trained technician.

Selection Guide

• Choose 5m for medium-distance rack connections.
• For shorter runs, consider the 2.5m version (sold separately).
• Order the 2-pack to have a spare on hand.
• Check connector type before ordering – matches all S7-300 64-channel.

Contact & Support

• Email: sales@powergearx.com
• WhatsApp: +86 18030005825

Copyright © 2026 Powergear X Automation Limited. All rights reserved.

Original Source: https://www.powergearx.com/