330193-00-03-50-00 Bently Nevada 3300 XL 8mm Proximity Probe – 5m Cable

330193-00-03-50-00 – Bently Nevada 3300 XL 8 mm Probe, M10 x 1, No Armor, 5m Cable

Genuine Bently Nevada 3300 XL 8 mm proximity probe. Long 5-meter cable, compact 30 mm case.
M10 x 1 thread, no armor, designed for 5m Proximitor sensor only.
Operates from -52°C to +177°C. Ships in 12-24 hours via FedEx, UPS, DHL.

🔍 Model Breakdown – Suffix Tree

• 330193 — Base: 3300 XL 8 mm Probe, M10 x 1 thread, without armor
  • │
    • -00 — Length configuration (0 mm threaded tip)
      • └─ No threaded tip extension. Max unthreaded: 230 mm
      • └─ Minimal mounting depth needed.
    • -03 — Overall case length (30 mm)
      • └─ Ultra-short case: 30 mm. Fits tight housings.
    • -50 — Total cable length (5.0 meters / 16.4 feet)
      • └─ Long cable for remote monitoring racks.
      • └─ Important: Designed for use with 5m Proximitor sensor only.
    • -00 — Agency approval (not required)
  • └─ Complete meaning: 8mm probe | 0mm thread | 30mm case | 5m cable | standard approval

📊 Technical Specifications

• ▸ General Info
  • – Brand: Bently Nevada
  • – Series: 3300 XL
  • – Model: 330193-00-03-50-00
  • – Type: 8 mm proximity probe, M10x1 thread, no armor
  • – Origin: USA
• ▸ Electrical Performance
  • – Linear range: 2 mm (80 mils)
  • – Sensitivity: 7.87 V/mm (200 mV/mil)
  • – Resolution: sub-micron
  • – Frequency response: DC to 10 kHz
  • – Linearity: ±0.2% of full scale
  • – DC resistance (5m cable): 8.73 Ω ±0.50
  • – Note: Use only with 5m Proximitor sensor for accurate scaling.
• ▸ Mechanical Dimensions
  • – Case thread: M10 x 1
  • – Max thread engagement: 15 mm
  • – Overall case length: 30 mm (short)
  • – Threaded tip length: 0 mm
  • – Total cable length: 5.0 meters (16.4 ft)
  • – Tip material: Polyphenylene sulfide (PPS)
  • – Case material: AISI 303/304 stainless steel
• ▸ Environmental Limits
  • – Operating temp: -52°C to +177°C (-62°F to +350°F)
  • – Extended tip temp: up to +218°C (+425°F)
  • – Humidity: <3% shift after 56 days at 93% RH
  • – Pressure seal: Viton® O-ring
  • – 60 Hz magnetic field immunity: low output interference

✅ Hazardous Area Approvals

• ✔ Intrinsically Safe (ia)
  • – With zener barriers (dwg 141092) or galvanic isolators
  • – Class I, Zone 0: AEx/Ex ia IIC T5…T1 Ga
  • – Class I, Groups A,B,C,D; Class II, Groups E,F,G; Class III
• ✔ Non-incendive (nA, ec)
  • – Per drawing 140979, nonincendive circuit
  • – Class I, Zone 2: AEx/Ex nA IIC T5…T1 Gc & ec IIC T5…T1 Gc
  • – Class I, Division 2, Groups A, B, C, D
• 📊 Temperature Class (Probe only)
  • – T1: -55°C to +232°C | T2: -55°C to +177°C
  • – T3: -55°C to +120°C | T4: -55°C to +80°C | T5: -55°C to +40°C

🔧 Install & Compatibility

• ▸ Mounting tips
  • – Use M10 x 1 threaded hole. Do not overtighten.
  • – Set air gap between 0.5 mm and 2.0 mm for best linear range.
  • – Keep cable away from sharp edges and heat sources.
• ▸ System requirements
  • – Must use with 5m Proximitor sensor. Not compatible with 1m or 9m Proximitors.
  • – Works with Bently Nevada 3500 racks, 1900/2300 monitors (when using correct Proximitor).
  • – Extension cables:
    • • 330190-080-00-CN (8.0m, country-specific)
    • • 330190-080-01-05 (8.0m, extended temp)
• ▸ Compare models
  • – This probe (330193-00-03-50-00) has 5m cable, compact case. Perfect for long runs to monitoring rack.
  • – For longer extensions, pair with 330190-080-00-CN or 330190-080-01-05.

🏭 Where to Use – Ideal Machines

• – Large steam turbines & gas turbines with remote monitoring panels
• – Centrifugal compressors where Proximitor is far from probe
• – Generators and heavy motors in power plants
• – API 670 compliant machinery protection systems
• – Hazardous areas Zone 0, Zone 2 with barriers

🎯 Manager’s Insight – Long-Reach Reliability

“The 330193-00-03-50-00 solves long-distance monitoring needs. With 5-meter cable, you can place the Proximitor in a safe cabinet away from machine vibration.
Compact 30 mm case fits shallow mounting holes. Always pair with the matching 5m Proximitor sensor for accurate readings.
Ideal for retrofits where the original cable length was too short.”

❓ Frequently Asked Questions

• Q: Why does this probe work only with the 5m Proximitor sensor?
  A: The cable length affects system scaling. Bently Nevada designed this probe for the 5m Proximitor. Using other Proximitors will cause incorrect readings.
• Q: Can I add an extension cable to make it longer?
  A: Yes. Use 330190-080-00-CN or 330190-080-01-05. Total system length becomes 5m + extension.
• Q: How to test if the probe works before installation?
  A: Measure DC resistance between center and outer conductor. For 5m cable, reading should be 8.73 Ω ±0.50. Also check tip for scratches.
• Q: What warranty and shipping do you offer?
  A: 12 months warranty. We ship within 12-24 hours via FedEx, UPS, DHL with tracking.
• Q: When should I pick this 5m version over shorter ones?
  A: Choose this when your monitoring rack is far from the machine. Avoid splicing cables. The 5m integrated cable gives reliable signal without extra connectors.

📦 Selection Guide & Delivery

• In the box: 1 x 3300 XL 8mm Probe, protective cap, documentation
• Warranty: 12 months from invoice
• Shipping: 12-24 hours dispatch via FedEx, UPS, DHL express
• When to choose this model: Ideal when you need 5m cable length and compact 30mm case. Must use with matching 5m Proximitor sensor.